Latest crown cap Tenders | Government crown cap Tenders

Central Government/Public Sector

CTN :40538394

09 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of single inlet centrifugal fan suitable for 3-phase , 415v ac, along with ducting arrangement for pantry in vande bharat trainsets. specia l note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/e mp/1 dated.01.04.2025, as per drawing: edts-331, rev. a, corr-1,2 and 3. (type-iii), packing instr uction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charg er, self priming monoblock pump, inverter, change over control box etc: suitably cove red with biodegradable transparent polythene and packed in wooden cage: bottom fra me to be made of wooden planks 20mm thick &should have support of at least 3 woode n battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips o f 20x100mm size. gap between each strip should not be more then 100mm. the material u sed for product packaging shall be eco-friendly.a list should be pasted on each wood en cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's n ame &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed bel ow: a) name of the manufacturer b) purchaseorder number c) pur chaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliver ychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detail ed above. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40539143

07 Jul, 2025 NA

Kapurthala - Punjab

Tender For supply of control panel for radiator fan motor of diesel engine for lhb power ca, a s per drawing: edts114,rev-b,am-1., packing instruction: alternator,rru, erru & accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polyt hene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thic k & should have support of at least 3 wooden battons of size 100x100mm of suitable le ngth to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suit able dimensions made out of wooden strips of 20x100mm size. gap between each strip sh ould not be more then 100mm. the material used for product packaging shall be eco-fri endly.a list should be pasted on each wooden cage showing order no, pl no, descriptio n of the item, drg. no/ spec. no ,qty, firm's name & address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40537908

04 Jun, 2025 NA

Dehradune - Uttarakhand

Tender For supply of vestibule bellow top complete for gangway of lhb type coaches as per icf drg. no. lwsczac-2-5-005, alt. nil with set of bellow securing fasteners to drg. no. lwsczac-2-5-0 02, alt. g (items no. 8, 9 & 10, each consisting of 09 nos per set), conforming to rdso specification n o. rdso/2007/cg-05 (rev. 1).note:-1) packing condition:- covered in transparent polythene an d packed in suitable length wooden case as shown in icf drg. no. icf/sk-2-5-0902) item to be pr ocured from rcf approved vendors for uic type elastomer flange connections for inter- communi cation between passenger coaches only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40509286

05 Jun, 2025 NA

Kanakapura - Karnataka

Tender For supply of wearing plate finish machined for side bearer, as per drawing: emu/m-0-5-047 alt. 'e', packing instruction: brown papper wrapping for individual item collectively packed in wooden boxes [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40511039

23 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply of set of panel (switch board cabinet) for lhb eog non ac coaches, as per draw ing: edts355,rev-1,am-6 with rdso modification sheet no.rdso/pe/ms/tl/0090-2023(rev-0), p acking instruction: electrical panels to be protected with transparent biodegradable pol ythene bag/sheets thickness of 0.1 mm or an antistatic bag of 350 to 400 gauge (100 mic ron approx.) on all sides of panel &panel shall be packed in transport worthy wooden cage. bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden batons of size 100x100mm of suitable length to facilitate lifting by f ork lifter &secure properly with suitable packing to avoid in-transit damage. each panel to be packed in transport worthy wooden cage of suitable dimensions made out of wooden strip of 20x100 mm size. gap between each strips should not be more then 10 0mm.a list should be pasted on each wooden cage showing order no, pl no, description, drg /spec. no, qty, firm'name &address, consignee name, date of dispatch, t op bottom arrow mark etc. note-1.the item &its packing shall carry a qr code(optional) containing the details as listed below (qr code(optional) to be affixed near name plate of item &on top of packing) a)name of the manufacturer b)purchase order number c)purchase order date d)unique serial number (or lot number f or bulk items) of the manufacturer or e)date of manufacture < manudate> f)delivery challan no. g)delivery challan date 2 . the qr code(optional) shall be as per iso/iec 18004 model2 and the data shall be availa ble as xml using the tags detailed above. 3. in case the above details are not available, or the qr code(optional)s are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40500171

03 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of console to drg.no. aaa11829 item-1 alt ' a ' = 2 nos. aaa11831 item-1 alt ' a ' = 2 n os. special condition : item to be packed in polythen bags and in suitable size wooden pallet. 1) all polythene bags shall be of min. 200 microns thick , sealed water tight in all sides. 2)eac h polythene cover must have identification label with list of items inside. 3)each wooden bo x shall be stenciled or rigidly nailed with identification label. 4)finished components shall be t horoughly cleaned and applied with epoxy zinc phosphate primer as per rdso/spec no.m&c/pcn/100 latest to a dft of minimum 60 microns and mdts-094 latest shall be followed. for procedure and colour sh ade excluding the areas as specified in detail drawings. 5) suitable packing to be done to prevent d amage during transit, unloading and rusting during storage. [ warranty period: 30 months af ter the date of delivery ]

Central Government/Public Sector

CTN :40503451

30 Jun, 2025 NA

Kanakapura - Karnataka

Tender For supply of high tensile tightlock cbc with aar 'h' type head and balanced draft gear. (all items are to be packed in one single packing), as per drawing: 'rdso's specification no. rdso/2011/cg-03 rev. 3 with amendment slip no. 01, without crash element"., packing instruction: l hb cbcs are being used in two stages in rcf and as per shop (using ) practice , it is propo sed that lhb/cbcs to be packed in two wooden boxes as per packing instruction here u nder :- 1.packing -i:- un-coupling device with hardwares and other related acessories. a ll related hardwares to be packed separately in jute packing to avoid rusting/corrosi on of hardwares . pl no to be printed/marked on packing slip and 'for use of fur group' to be marked on box . 2.packing -ii:- one coupler head, one draft gear with hardwares a nd other related acessories. all related hardwares to be packed separately in jute packing to avoid rusting/corrosion of hardwares .machined surfaces must be covered with corrosion resistant paint/substance. pl no to be printed/marked on packing slip a nd 'for use of underframe group' to be marked on box . note: (i) item no. i, ii should be p acked in separate boxes. (ii) a list should be pasted on each box showing order no. , pl no., description of item drg. no./spec. no., qty., firm's name, address , user name as abov e & date of despatch etc. , proction procedure: n.a, quality plan: n.a [ warranty period: 84 mon ths after the date of delivery ]

Central Government/Public Sector

CTN :40485604

09 Jun, 2025 NA

Rajkot - Gujarat

Tender For supply of vestibule bellow complete (lh side) for gangway of lhb type coaches as per icf drg. no. lwsczac-2-5-003, alt-nil with set of bellow securin g fasteners to item no. 8, 9 & 10 (qty-04 set) conforming to assy. drg. no. lwsczac-2-5- 002. note- (a) packing condition: covered in transparent polythene and packed in suitable length wooden case as shown in icf drg. no. icf/sk-2-5-090 to avoid deforming of rubber bellow ring. (b) material conforming to rds o spec. no. rdso/2007/cg-05(rev-1). [ warranty period: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :40473324

29 May, 2025 NA

Kapurthala - Punjab

Tender For supply of set of panel (switch board cabinet) for lhb eog non ac coaches, as per draw ing: edts355,rev-1,am-6 with rdso modification sheet no.rdso/pe/ms/tl/0090-2023(rev-0), p acking instruction: electrical panels to be protected with transparent biodegradable pol ythene bag/sheets thickness of 0.1 mm or an antistatic bag of 350 to 400 gauge (100 mic ron approx.) on all sides of panel &panel shall be packed in transport worthy wooden cage. bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden batons of size 100x100mm of suitable length to facilitate lifting by f ork lifter &secure properly with suitable packing to avoid in-transit damage. each panel to be packed in transport worthy wooden cage of suitable dimensions made out of wooden strip of 20x100 mm size. gap between each strips should not be more then 10 0mm.a list should be pasted on each wooden cage showing order no, pl no, description, drg /spec. no, qty, firm'name &address, consignee name, date of dispatch, t op bottom arrow mark etc. note-1.the item &its packing shall carry a qr code(optional) containing the details as listed below (qr code(optional) to be affixed near name plate of item &on top of packing) a)name of the manufacturer b)purchase order number c)purchase order date d)unique serial number (or lot number f or bulk items) of the manufacturer or e)date of manufacture < manudate> f)delivery challan no. g)delivery challan date 2 . the qr code(optional) shall be as per iso/iec 18004 model2 and the data shall be availa ble as xml using the tags detailed above. 3. in case the above details are not available, or the qr code(optional)s are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40434565

04 Jun, 2025 NA

Dibrugarh - Assam

Tender For supply of wheel set earthing equipment, as per drawing: edts101,rev-c,am-2,cor-8 am-3.rcf annexure 1, modification as per rcf drg. no: sked-945, packing instruction: suitably covered with biodegradable transparent polythene and packed in wooden box.the material used for pr oduct packaging shall be eco-friendly. each packing shall be stenciled/labeled handle wit h care, consignee name, order no, pl's no, description of item, batch no, drg/spec no, qty,f irm's name, & date of despatch etc. [ warranty period: 30 months after the date of delivery ]

Crown Cap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors