Latest crusher motor Tenders | Government crusher motor Tenders

Central Government/Public Sector

CTN :40501065

23 Jun, 2025 NA

Multi City - Multi State

Tender For supply of wiper motor complete lh / rh as per clw specn clw/ms/3/050 alt-6 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40500202

10 Jun, 2025 NA

Krishnarajapuram - Karnataka

Tender For supply of set of cable cleat with din rail for traction motor of wap-7 loco to clw spec. no. clw/es/3/0 045 alt-g or latest (one set consists of one loco set as per specification and one loco set consists of 09 ite ms comprising of 180 nos). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40511084

10 Jun, 2025 NA

Patratu - Jharkhand

Tender For supply of filter assly. for traction motor ventilation. specn/drg/ no.- as per clw specn. no. clw/ ms/3/012, part i, ii,iii, alt-6 with latest alteration and clw drg. no. 1209.11-135.122, alt-2 with latest alteration, abb drg. no. ia111-00002, alt-4 with latest alteration. [ warranty period: 30 months afte r the date of delivery ]

CTN :40469270

14 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - rock breaker with chisel and moil(ref-xxxiac-1) , head front(ref no-a3-5-3) , turbo charger 1 h1 rh b-6(plate-z1 oblique 1) , cap screw (ms sl-245) , joint for del volute , bulb 12v 10w (feston) , wrench bar 6 , wrench bar 08 , by pass hose(ms-173) , o ring , adaptor , de spanner 16x17(jcb super, plate-v11d) , inner cable(d3-1-5) , bolt(plate xxxi c) , plate friction clutch (ctlg 3dx e5-1-30) , joint (for rocker cover)ms-162) , male cone blacking plug set (smt sl-09) , tooth point (ispl plate-k04) , bush (cat 3dx a2-1-1) , triple lip seal (f5-1-20) , wiper assy front(item no -955) , push rod(r2) , hose top(p4-4-2) , o ring for cyl liner(ms-157) , hose(e3-13-1) , plug water jacket(r2) , hose air induction , seal kit, steer ram(ms-464) , pin pivot(plate-a1-7-2) , hose 1 by 4 inch x 1 by 4 inch bspx1200 long , hose(plate-e1-13-1) , hose(e1-1-2) , tooth (ispl plate-i03) , door handle lh(plate -iv n-9) , joint, liner to head, 0.4mm thk , hose (e1-8-11) , rear frame hose retainer(ispl-938) , hose , fan face level 12v (c1-17-1) , throttle cable assembly (jcb super plate xi a) , hose 08 bsp hp 1910mm a , hose(plate-e1-9-15) , hose (1 by 2 inch bspx1 by 2 inch bspx1130mm long , hose 4 wd rh , gasket cyl head(plate-xxxiii a) , glass tinted left side(plate iv r-4, 379) , hose l h , hose(3dx ctlg e1-9-2) , window tinted glass rh(jcb super,366) , hose(sl-36922, price list) , hose , dowel(r2) , hydraulic hose (ispl plate-f01) , adjuster auto tensioner(plate-xxxviii a1) , nozzle(ms sl-574) , parkbrake caliper g.a (ispl sl-1691) , pin pivet 600mm wind jaw (ref-xxxif) , track rod end gaiter(f1-30-10 by 1a) , hose(plate-e1-9-12) , valve inlet , tool chisel(sl no-2351) , cap filter , universal driveshaft , pressure gauge kit with snap(smt sl-01) , cyl head sub assy , joint knukle swivel(f1-6-10) , grommet , self lubricating brg , leak off hose(ms-152)( plate no- p4-4-2, sl no-9) , nut castle m 20x1.5(f1-30-10) , spring brake shoe(ms-188) , strip 1260 mm long (jcb ms sl no 40) , gasket(ms sl-31) , interrior light (ispl-585) , plate door catch , oil seal 115x140x16 cr make(4r1040t ispl -oil seal , bearing bush ce(ms-189) , rubber hose(plate-l1-4-10) , bolt for con. rod(ms sl-545) , seal (r1 spare) , wiper blade(ms-79) , cap radiator , hose bottom radiator(p4-4-2) , oil ring , fuel filter element pre i 1 (mico no.1457431003) , sealing bush(ms-185) , pin pivot , fuel filter(plate-xxxviig, sl no-2538) , radiator assembly turbo , grommet cable harness( plate no- d1-21-2, sl no-17 , bulb 5 w , 10 amps fuse , de spanner 10x12 mm(plate-vii d -27) , wear pad(ms-27) , ring spanner 18x19mm(ispl sl-563) , screw driver 10 inch by 9 , o ring , female cone blanking plug set (smt sl-08) , friction plate(f5-3-40) , filter fuel secondry(amendment no1,ms-199, jcb 3dx , pipe fuel(plate-t, 44tc) , oil filter (ms sl-386) , ring sealing for bowl(ms sl-563) , gaiter hand brake , hose pipe for breather(ms sl-555) , hose - 4wd(ms-106) , hose(ms-97) , pivet pin alloy steel (ms sl-17) , lh lock assy(ms sl-49) , piston seal assy , working light(ms sl-94) , filter pre cleaner assy , pivot pin( ms sl no-10) , brush set(ms-194) , element , universel joint , piston seal(e4-1-6) , field coil assy(ms-195) , hydraulic hose (ms sl no 1789) , brake pad ga (ispl sl no-1695) , flange spanner for locking pinion mut(smt sl-04) , valve exhaust , silencer exhaust turbo(ms sl no--148,apr-2015) , solenoid switch , excavator valve (ispl plate-e3-6-1) , filter element, hyd oil(ispl plate-f06) , starter motor (item no- 76) (jcb super plate xx , fip 68 kw bs ii(item no-54) , arm loader short(ref no-b3-1-1) , axle arm & wheel hub assy (plate- xixb) , turbocharger 68 kw(ac)t3(plate- xxxix a-2544)

CTN :40469557

13 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - supply of washer(fig-130) , spring washer m12 (r.h)(ctlg fig-40) , bolt , 1 by 2 inch sq dr bi hex socket 27mm , switch panel 4wd 4wd actuator , ring snap throttle shaft , clamp , o ring (ctlg fig-2210) , o ring , piston , screen & cap filter , stud , gauge fuel (fig-12) , o ring , cable assy , hose , link ball , collar (fig-46) , cable , ring comp , shim assy , element , check valve , elbow , piston seal , flap rust 1300x24 , shim , bushing , shim , lamp , oil seal (fig-63) , cable (komatsu motor grader page 21-36) , guide , filter lub oil assy , cable assy , seal , belt water pump , service kit , hose(fig-70) , hose , bearing , shoe assy (chapter parking brake) , cushion assy , blade lift cylinder seal kit(fig-90) , tube compressure air inlet , cover assy (fig-19) , bearing , cyl kit (service kit) , valve shut down , service kit master cyl repair kit(ms sl no-697) , steering cyl kit , seal kit (fig no-96) , cable assy , techo service meter , seal kit (fig no-98) , cable assy , switch solenoid(44tc) , cable assy , seal kit (fig no -97) , seal kit(fig-99) , cable(fig-05) , unloader valve with tyre inflator , repair kit for scarifier cyl , guide , cable , cable , wheel cyl service kit , slave servo(ctlg fig-60f) , valve assy service kit , brake piping (2 by 4) air over hydraulic , cutting edge(fig-130) , propeller shaft assy , cylinder assy(komatsu motor grader page 24-23) , condensing unit & auto drain valve , wheel cyl assy (oem) , pilot check valve assy (fig no-108) , reservoir 10 litre(fig-60g) , steering cylinder(mg605r2 fig no 89) , steering cyl assy(fig-89) , kit , master cyl assy (fig-56) , hyd control valve (rh)(ispl fig-103) , hyd control valve (lh)(ispl fig-104) , leaning cyl assy (fig-86) , joint assy , propeller shaft , starter motor , blade shift cyl assy (fig-83) , shoe assy , valve assy

CTN :40508135

18 Jun, 2025 NA

Kolkata - West Bengal

Tender For supply of lv7-tmb 9400-030-708 fuel injection pump , lv7-tmb 2786-1599-9966 starter motor 24 volts , lv7-tmb 2641- 4370-0111 repair kit air dryer assy , lv7-tmb 2573-5450- 9931 battery cut off switch , lv7-tmb 2574-4215-0113 wheel cyl with citradelip 44.45 mm dia , lv7-tmb 2699- 2910-0177 major kit clutch master cyl repair , lv7-tmb 2574-5420-9987 horn 12v , lv7-tmb 2786-0913-9909 air filter element safety , lv7-tmb 2520-012589 slave cylinder , lv7-tmb 2576-4374-0108 4 way system protection valve , lv7-tmb 1467-030-308 vane pump , lv7- tmb 2641-2910-0117 clutch master cylinder 19.05 dia , lv7-tmb 2654-5451-0119 combi switch ms harness , lv7- tmb 2754-2910-0106 clutch slave cylinder , lv7-tmb 2625-8081 field coil assy , lv7-tmb 2754-2910-0127 assy sleeve cyl , lv7-tmb 340-331-0050 bush king pin

CTN :40508498

17 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of cement in polythene bags 50 kgs each 43 opc , sand coarse , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , rr stone boulders , tmt steel bar 8 mm dia , tmt steel bar 10 mm di , tmt steel bar 12 mm dia , tmt steel bar 16 mm dia , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric , 75mm dia pvc pipe for weep hole , scantling 3 x 3 inch seasoned first class hard wood 2 point 30 mtr long , shuttering plywood of size 8 x 4 feet and 12mm thickness , binding wire 20 gauge zero point 9mm annealed , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 4 inch for shuttering , water proofing compound , quick setting compound , ms door pre fabricated , loophole of size 600 mm x 500 mm , bitumen vg 10 , 10mm thick ms plate as in one layer on roof , 20mm thick ms plate as in two layers on roof , shredded rubber 150 mm , lime , primer for synthetic paint , synthetic enamel paint light brown shade , synthetic enamel paint medium brown shade , synthetic enamel paint dark brown shade , paint brush , lighting conductor complete set , cut off machine 14 inch , tile cutter make bosch for ply cutting , working goggle 1 as per sample , ppgi sheet zero point 60 mm thick of size 10 x 03 feet , durmut 5 kg with 5 feet wooden handle , concrete vibration machine petrol needle , hand gloves rubber best quality , pan motor tasala 18 dia made of steel , phawrah with handle midium size , shovel with handle , measuring tape 5 mtr rectractable grade a1 16 , measuring tape 10 mtr rectractable grade a1 16 , wiremess for seiving sand 1 mtr width 15 mtr roll , axes picks 3 kg head with handle , crow bar hexagonal 1200mm long x 40mm dia , gum boot various size , spirit level 10 inch long , nylon mason thread 100m long , mild steel single hand double wheel barrow to carry upto wheel barrow 200 kg weight , rock drill machine bit 48mm thick , rock drill machine bit 32mm thick , plumbob steel with lasing , water level pipe for mason work transparents , hammer 10 kg with handle , tmt bar bending frame , tmt bar bending handle , wooden gurmala of size 8 x 4 inch , aluminium study of size 3 x 2 inch and 6 feet long , steel gurmala of size 8 x 4 inch , hdpe tirpal of size 30 x 30 feet , steel bucket 15 ltr , iron cutter blade 14 feet , iron cutter blade 4 feet , hexa blade double side , portable hydraulic concrete mixer machine conforming to is 12119 to 1987 to provide an uniform mix for a reliable operation

CTN :40500950

20 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of set of damper for wap-5 locos as per clw specification no.clw/ms/10/005 alt-1. each set consists of (i) axle damper clw drg. no.1210.01.215.014 ref 1 alt 1 -qty 8 no s. (ii) horizontal damper clw drg. no.1210.01.215.014 ref 4 alt 1 - qty 4 nos (iii) vertical da mper clw drg. no.1210.01.215.014 ref 3 alt 1 - qty 4 nos (iv) yaw damper clw drg. no.1210.0 1.215.014 ref 5 alt 1 - qty 4 nos (v) motor damper clw drg. no.1210.01.215.014 ref 2 alt 1 - qt y 4 nos [ warranty period: 30 months after the date of delivery ]

CTN :40489906

05 Jun, 2025 NA

Mettur - Tamil Nadu

Tender For scrap/disposables - ms miscellaneous scrap , rubber scrap , condemned nylon cad conveyor belt scrap , ss with ms welded scrap , condemned a/c compressor , split type wall mounted a/c scrap , ms with ceramic and concrete scrap , m.s misc. scrap , m.s misc. scrap , stainless steel scrap , waste paper scrap , pvc scrap , teak wood scrap , cast iron scrap , brass scrap , deal wood scrap , instrumentation scrap , aluminium scrap , bearing scrap , condemned motor 0.25hp , condemned printer , copper with aluminium mixed scrap , condemned sv/mv choke (various sizes)

CTN :40485032

16 Jun, 2025 NA

Burdwan - West Bengal

Tender For supply of wiper motor complete rh and lh for 3 phase/wag-7 locos as per clw specn. no. clw/ms/3/ 050 alt.-6 and clw drg. no. 1209-07-303-019 alt.-1. [ warranty period: 30 months after the date of deliv ery ]

Crusher Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector