Latest cs channel Tenders | Government cs channel Tenders

corporations/Associations/Others

CTN :41003097

29 Jul, 2025 10.00 Lacs

Thiruvananthapuram - Kerala

Tender For supply of 8mp ir bullet camera , 5mp ir dome camera , 2mp ir bullet camera , 5mp ir bullet camera , 32 channel nvr with 4k support and 4 hdd slots , 10 tb hdd , poe switch 16 port , indoor rack - 6 u rack premium series , indoor rack - 4 u rack premium series , cat 6 indoor cable pvc , gi pole , angler with 12inch housing and stand , lclamp for fitting of items in wall , led monitor , 4k monitor , cabling and fixing of 5amps ups power point , installation of cctv and other items required

CTN :40977611

28 Jul, 2025 NA

Indore - Madhya Pradesh

Tender For supply of upgradation of kautilya lhcc of army war college c c - video wall 23 1 ft by 15 point 7 ft plus controller , fix a video wall support structure constructed from square ms pipes , 98 inch video monitor display , 65 inch interactive display panel with ops , compact active stage monitor , lecture hall entry sinage , 4k 8 by 8 matrix switch , hd base tt extender rx , high quality audio signal cable , speaker cable , 3 mtr fiber hdmi cable , 5 mtr fiber hdmi cable , 10 mtr fiber hdmi cable , 15 mtr fiber hdmi cable , condensor microphone capsule , metal gooseneck stick , system interconnects , professionals power sequence controller , dsp full rack 19 inch 1ru processor , pair rimless 5 point 5 inch ceiling loudspeaker 20 watt , poe double plus managed switch 8 port , four channel poe amplifier with integrated dante networking , celing microphone , 65 inch oled large format display , retractable table monitor , supply installation testing and commissioning sitc of room ) /bid number : gem/2025/b/6422787 * /dated: 07-07-2025 & & / bid document 1 / 24

CTN :39498481

07 Jul, 2025 NA

Bangalore - Karnataka

Tender For bid to ras bid to ras supply of als wmp 1 each 2 qty 10 nos - iis pc with following configuration_equivalent or higher_ motherboard _ intel motherboard _ hdd _ monitor with following config_ , cgi pc with following configuration_equivalent or higher_ motherboard _ intel motherboard _ hdd _ monitor with following config_ , sound system_5_1 channel sound system_speaker 5 _1_ approx _ speaker power_ 25w as per specification , ups _ups 5 kva on line _output power capacity 5000 va max output voltage 230v , ethernet switch hub_8_port ethernet switch , hdmi splitter 4 port_1 x 4 hdmi splitter 4k support_connector type , lan card _pci lan card _specifications standards , printer__laser printer__printer black_ print speed up to 14 ppm_normal_ a4 speed specification per industry standard testing methods , dvd blank__dvd blank with jewel case__recordable dvd 4_7 gb_120 minuts with jewel case_ , pci serial card_pci card 2xserial port_supports pci irq sharing_saves valuable resources for other expansion card , driving force racing wheel _force feedback and game wheel_logitech g29 driving force racing wheel with shifter module , converters__dp to hdmi converter_supports video resolutions up to 3840x2160 4k support , hdmi to vga converter_pc hdmi and dp converter with i_p vga to o_p svga_ vga_ tv and video converter_ , dvi_d to vga converter_pc hdmi and dp converter with i_p vga to o_p svga_ vga_ tv and video converter_ , display_graphics accelerator card_high end graphics card with 4gb gddr5x ram with the fwg as per specification , video projector__lcd projector wuxga type 1920x1200_ 5500 ansi lumens_short throw lens with geometry , lcd monitor screen size 7inch diagonal_lcd monitor screen size 7inch diagonal_ physical resolution 800 x 480 , operating system__microsoft windows_10 _windows 10 professional oem pack , application software__ms office__ms office 2019_ consists ms access_ , programmable logic controller__plc for als programmable logic controller_interface pcb _ sdd approved , gear sensor__gear sensor pcb__specification _ inputs_ active lo_ 8 nos_ outputs _ 8 nos_ , power cable__2 core power cable__type yy_1 sq mm dia strength 8_1 kg , 3 core power cable__h07_rnf_1_5 sqmm dia isi standard , 3 core power cable__h07_rnf_2_5 sq mm dia isi standard , signal cable__10 core cable unshielded__type yy 6_3mm dia strength 8_1 kg_ , 15_core cable gear sensor pcb to interface pcb with 15_pin male and female d_sub end connectors 1m length , 25 core cable unshielded__screened 6_3mm dia , connector__2 pin wago connector__2 pin wego connector plug male and female sockets pair_ 0_138inch , 3 pin wago connector__3 pin wego connector plug male and female sockets pair_ 0_138inch 3_5 mm pitch , connector__4 pin wago connector__4 pin wego connector plug male and female sockets pair_ 0_138inch 3_5 mm pitch , 10 pin wago connector_10 pin wego connector plug male and female sockets pair_ 0_138inch 5 mm pitch , 16 pin wago connector_16 pin wego connector plug male and female sockets pair_ 0_138inch 5 mm pitc , 3 pin female bug connector _3_96mm pitch friction lock header_ with bug pins_ isi standard , 9 pin automobile connector male and female_panel receptable 9 way with pins male and female pair , 9 pin d_shell female connector complete with dust cover and strain relief_itt d_sheel connector_ isi standard_ , 9 pin d sub male connector complete with dust cover and strain relief _itt d_sheel connector_ isi standard_ , 15 pin d_shell female connector complete with dust cover and strain relief_itt d_sheel connector_ isi standard_ , 15 pin d_shell female connector complete with dust cover and strain relief_itt d_sheel connector_ isi standard_ , 25_pin d_shell connector female complete with dust cover and strain relief__itt d_sheel connector_ isi standard_ , connector__25_pin d shell connector male complete with dust cover and strain relief__itt d_sheel connector_ isi standard , audio cable_audio cable 10 m length_flexible audio cable benden 1503a , ac plug top

Central Government/Public Sector

CTN :40963001

24 Jul, 2025 NA

Bhavnagar - Gujarat

Tender For t supply of item as per boq d d - coir mattress- size- 6 feet x 6.6 feet x 8inch brand- kurl on or similar. , wooden double bed- size- 6feet 5inch x 6feet 75inch x 10inch , wooden side table with single pullout drawer moulded on concealed channel. fix with laminate. , wooden upholstered sofa with arm and medium back- size- 84inch x 30inch x 18inch high seat. , upholstered curve sofas with arm , medium back size 170inch x 30inch with 18inch high seat. , upholstered chair with arm and medium back , size 30inch x 30inch with 18inch high seat. , center table- size- 36 x 21 x 18inch high laminated center table with mirror polished marble top , corner table size- 30inch x 21inch x 18inch high laminated corner table with mirror polished marble top , dining table size- 66inch x 36inch x 30inch high laminated dining table with mirror polished marble top. , dining chair size- 18inch x 18inch chair with seat height 18inch and medium back without arm rest with cushion seat. , writing table size- 48inch x 24inch x 30inch writing table with pull out drawer below top and finished with marble top and laminate , tv unit size- 48inch x 15inch x 30inch with marble top and laminate with one shelf below top. , lower unit a size- 72inch x 21inch x 30inch lower unit with marble top and laminate including one row of pullout drawer 06inch high and side hung shutters below with adjustable shelf , lower unit b size- 72inch x 24inch x 30inch lower unit with marble top and laminate including one row of pullout drawer 06inch high and side hung shutters below with adjustable shelf. , microwave unit size- 36inch x 24inch x 30inch lower unit with marble top and laminate including one row of pullout drawer 6inch high and side hung shutters below with adjustable shelf. , luggage rack size- 36inchx 24inch x 18inch with full side support and 6inch wall side back splash all finished with laminate and granite top. , wardrobe size- 45inch x 84inch x 24inch cupboards with 18inch x 18inch shelf on one side from top to bottom , 24inch or more hanging space , 42inch high with 0.5 dia.. s.s. rod fixed at 03inch center from top. one side 06inch high pullout . , chair lounge size 15inch x 54inch x 18inch upholstered chair lounger with 04 legs. , dressing table a size- 36inch x 18inch dressing table shelf with one pullout drawer of 06inch high. fixed with wall at 15inch height f.f.l. including 36- clear width mirror of 66inch fixed above dressing shelf. , dressing table b size- 18inch x 18inch dressing table shelf with one pullout drawer of 06inch high fixed with wall at 15inch height f.f.l. including 18inch clear width mirror of 66inch fixed above dressing shelf.

CTN :40960974

25 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of components for membrane distillation (md) experimental skid as per the specification - end plates (600mm * 260mm * 12mmthk) with 12 no holes for $ 10 mm studs m.o.c: ss 316 l as per fig 1., support plates ( 600mm * 260mmx * 12mmthk .) with 12 no holes for $ 10 mm studs m.o.c: polypropylene as per fig 1, end block ( 600mm * 260mm * 50mmthk .) with 12 no holes for $ 10 mm studs. the end block shall have 2 nos. of 12 mm port tapping for feed inlet & sweep gas outlet. m.o.c: polypropylene as per fig 1, end block (sweep gas inlet & vapor outlet) ( 600mm * 260mm * 50mm thk) with 12 no holes for $ 10 mm studs. the end block shall have 3 nos of 12 mm tapping for push fit. m.o.c: polypropylene as per fig 1, hot water channel ( 600mm * 260mm * 8mmthk .) with 12 no holes for ? 10 mm studs. the channel shall have internal water distribution with arrangements for sweep gas passing. m.o.c: polypropylene as per fig 1, air gap/vacuum channel ( 600mm * 260mm * 8mmthk .) with 12 no holes for $ 10 mm studs. the channel shall have inlet and outlet for sweep gas and arrangements for feed water passing. m.o.c: pp as per fig 1, silicon gaskets ( 600mm * 260mm * 8mmthk .) with 12 no holes for $ 10 mm studs.) as per fig 1, 600 mm long $ 10 mm ss studs with sleeve and nuts

CTN :40633387

09 Jul, 2025 3.00 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : daiviya apda work under edsd- rura - carriage of various size pcc poles from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of various size st poles (9 mtr /11mtr/ 13mtr ) from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of line material viz. weasel/rabbit/racoon /dog conductor, g.i. earth wire, cross arm, angle, channel, cable boxes, static meter insulators, clamps and other line material from store center or from any other place to the respective site of work through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., erection of p.c.c double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c double pole the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of p.c.c single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p double pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., renozzling of damaged stay set as per respo manual and also including the cost of all grouting material, labour, t & p etc. required for proper completion of work., dismentling of rusted weasal/racoon /dog conductor wire and g.i wire & safe carriage of scrap material back to store as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work., laying, sagging, stringing, binding and jumpering etc. of weasal/dog/rabbit conductor in new erected pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for prope

State Government

CTN :40940352

28 Jul, 2025 9.05 Lacs

East Nimar - Madhya Pradesh

Tender For procurement of spare parts of unique industrial handlers make eot cranes installed at 2x660mw, ph-ii, sstpp, mppgcl, dongalia /etni-ii - "pulse encoder: sn:700001240582, ip 66, f255, ub 9-30v dc).1024ppr, class 2, existing make: baumer" , shrouded type dsl for 110/25t eot: 400a copper dsl with expansion joint, support & fastner, hangers & jointing clamp etc. , accessories of dsl , 4 pole hanger clamp , copper joint link , joint cover , current collector , 250a current collector for 110/25t eot. , anti-collision device, model no. acc 102. , dc electromagnetic brake , "dcem brake :code ebdc 300/bm, inrush volt:300v dc, torque :76kgm, rating 100, drum dia 300, dsn volt 220v dc, holding volt: 150 v dc, stroke 3, spg 220ver, sr.no. v-24627/1, existing make: elektromag methods" , "dcem brake: code ebdc 300/bm, inrush volt:300v dc, torque: 76kgm, rating 100, drum dia 300, dsn volt 220v dc, holding volt: 150 v dc, stroke 3, spg 220ver, sr.no. v-24627/2,existing make: elektromag methods" , dyanamic braking resistor. , "dyanamic braking resistor for mh, s.no. sj-342, job no. sj-1348, kw/h.p: 30/ ,volt: 600, amps: 51.3, type: wi30dbr11.4/p6, ohms: 11.4, rating : conti., existing make: speed-o-controls pvt. ltd" , "dbr for ct, s.no. sj-344, job no. sj-1348, kw/h.p: 1.2/ ,volt: 600, amps: 4.5, type: wi1.2dbr60/p6, ohms: 60, rating : conti.,existing make: speed-o-controls pvt. ltd" , "dbr for lt, s.no. sj-346, job no. sj-1348, kw/h.p: 6.4/ ,volt: 600, amps: 19.5, type: wi4dbr16.9/p6, ohms: 16.9, rating : conti.,existing make: speed-o-controls pvt. ltd" , radio remote control , rrc: radio remote control ( shoulder hung, joystic type). range: approx. 355m, frq: 335mhz. (transmeter+ receiver) , rectifier pannel complete unit for dcem brake , "rectifier pannel having sr.no. v-24628/4 is connected with dc brake dia 300 having sr.no. v-24627/4. dc pannel specification: code rpnlc/12, c/s: 50, ac voltage: 415v ac, dc voltage:150v dc, sr.no. v-24628/4, existing make: elektromag methods" , line choke -3phase: inductance 0.157mh, current: 142 amps., imax: 150% , master controler , s.no. sm-1115, type: cm4/sr/6, volts 500 max, amps 40, existing make: speed-o-controls pvt. ltd , s.no. sm-1117, type: cm4/sr/6, volts 500 max, amps 40, existing make: speed-o-controls pvt. ltd , steps:4, volts: 500, amps: 40/10, c/s: 50, existing make: elektromag methods , anti-collision limit switch :anti collosion limit switch, aux supply :110v-230v (for lt), infra red type, range 5-10mtr. existing make electronic switches , requirement of electrical spare parts for unique make eot crane job no.bg-018-01-02 (tdbfp eot) , relay board 8 channel,110v ac, 2c/o contact, 5a. , shrouded type dsl for 60/10t eot: 160a copper dsl with expansion joint, support & fastner, hangers & jointing clamp etc , current collector , 100a current collector for 60/10t eot. , dc electromagnetic brake , dcem 250 dia brake for mh,drum dia 250, 115v. dc, 1.6a , dcem 250 dia brake for ah, drum dia 250, 115v. dc, 1.6a , dyanamic braking resistor. , dbr for mh,s.no. sk-043, job no. sk-072, kw/h.p: 17/ ,volt: 415, amps: 32, type: wi17dbr16.9/p6, ohms: 16.9, rating : conti., existing make: speed-o-controls pvt. ltd , dbr for ah s.no. sk-045, job no. sk-072, kw/h.p: 12/ ,volt: 415, amps: 25, type: wi12dbr20/p6, ohms: 20, rating : conti., existing make: speed-o-controls pvt. ltd , dbr for ct, 130 ohm, 600w , dbr for lt, 40 ohm , 2kw , rectifier pannel complete unit for dcem brake , rectifier pannel having is connected with dc brake dia 250mm dc pannel specification: code rpnlc250, c/s: 50, ac voltage: 415v ac, dc voltage:150v dc, sr.no. 44979/3, existing make: elektromag methods

State Government

CTN :39623015

15 Jul, 2025 5.26 Crore

Delhi - Delhi

Tender For corrigendum : sitc of 263 cctv camera system - supply and installation of ptz camera 8 megapixel , supply and installation of fixed bullet camera 5 megapixel , anpr 5 megapixel camera with license of anpr system , supply and installation of ip joystick , supply and installation of 55 inch colour led panel , supply and installation of pc workstation with vms client license , supply and installation of 64 channel network video recorder , supply and installation of hdd slot-sata and each slot support 10 tb minimum , supply and installation of sfp poe port switch , supply and installation of 48 port layer - 3 switch loaded with sfp modules , supply and installation of 24 port liu , cat 6 stp cable-ul listed , jack panel , optical fiber patch cord sm lc to lc fiber duplex patch cord , mounting cords , online ups with one hour back up for entire system-smf batteries , rj 45 connector , 2.5 sq mm 2 core wire power cable , 1g fiber module , pigtail lc , fiber cable , pvc pipes or conduit surface mounted with clips for lan cables , power or control cable with fixing and installation per meter , min 6 mtr pole or mast with mounted brackets , installation and commissioning charges of entire system , any other item to complete the project , camc 1st year after expiry of 3 years warranty , camc 2nd year after expiry of 3 years warranty , camc 3rd year after expiry of 3 years warranty , camc 4th year after expiry of 3 years warranty

CTN :40916693

22 Jul, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of proc of 48 line exchange - ip pabx system with configuration and installation commissioning , digital key phone , operator console with 32 dss keys , 100 pair mdf idf box with original krone plate module , ipm for power protection on extensions , additional cpu card , additional psu card , e1 isdn cept card with optical termination single port each , e1 isdn pri cept card one port each , voip gateway card for 16 channel , gsm card for 4 port gsm sim 4g volte support , radio interface card with assy , ip based emergency hooter gateway , line extension card for 16 ports , digital line card for 8 ports , analog junction card 8 ports , analog cli with speaker phone , digital grounding device single phase , fcbc

CTN :40916733

22 Jul, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of proc of 128 lines exchange d d - ip pabx system with configuration and installation commissioning , digital key phone , operator console with 32 dss keys , 200 pair mdf idf box with original krone plate module , ipm for power protection on extensions , hot standby card for cpu , hot standby card for psu , e1 isdn pri cept card with optical termination single port each , e1 isdn pri cept card one port each , voip gateway card for 32 channel , gsm card for 8 port gsm sim 4g volte support , ip based emergency hooter gateway , line extension card for 32 ports , digital line card for 16 ports , analog junction card 16 ports , digital grounding device single phase , fcbc

Cs Channel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government