Get complete information related to latest Cs Flat Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cs Flat Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cs Flat Tenders.
Tender For corrigendum : periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening
Tender For corrigendum : repair of existing boundary wall providing and fixing of ms flat iron railing at commercial pocket of old jail site jalandhar under ouvgl scheme
Tender For supply of slotted csk (flat) head tapping screw - type-c st 4.2 x 32-c to is:7170-89 (reaf firmed 2004), bright zinc plated (bzp) to is:1573-86 (reaffirmed 2006) to service grade no. 2 of tab-2 [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of fasteners mpatgm - slotted csk flat head screws for mpatgm uc is-1365 m3x8l, aisi-4135 , slotted csk flat head screws for mpatgm uc is-1365 m3x6l, aisi-4135 , slotted csk hd screws for mpatgm uc is - 1365 m3x6l , slotted csk hd screws for mpatgm uc is - 1365 m2x3l , slotted csk hd screws for mpatgm uc is - 1366 m2x3.5l , slotted csk hd screws for mpatgm uc is - 1365-2016 m2x6l , slotted csk hd screws for mpatgm uc is - 1365 m2.5x6l , slotted csk hd screws for mpatgm uc is - 1365 m3x4l , slotted csk flat head screws for mpatgm uc is - 1365 m2x0.5x3.5l, a2-70 is 1367 part 14 , slotted csk flat head screws for mpatgm uc is - 1365 m2x0.5x5l, a2-70 is 1367 part 14 , slotted csk flat head screws for mpatgm uc is - 1365 m2x0.5x8l, a2-70 is 1367 part 14 , slotted csk flat head screws for mpatgm uc is - 1365 m2.5x0.5x5l, a2-70 is 1367 part 14 , slotted csk flat head screws for mpatgm uc is - 1365 m3x0.5x5l, a2-70 is 1367 part 14 , slotted csk flat head screws for mpatgm uc is - 1365 m3x0.5x6l, a2- 70 is 1367 part 14 , slotted csk flat head screws for mpatgm uc is - 1365 m3x0.5x8l, a2-70 is 1367 part 14 , slotted pan head screws for mpatgm uc is - 6101 m3x4l, aisi 4135 , slotted pan head screws for mpatgm uc is - 6101 m3x8l, aisi 4135 , slotted pan head screws for mpatgm uc is - 6101 m4x8l, aisi 4135 , slotted cheese head screws for mpatgm uc is - 1366-2018 m2x6l , slotted cheese head screws for mpatgm uc is - 1366 m2.5x20l, aisi 4135 , slotted cheese head screws for mpatgm uc is - 1366 m3x4l, aisi 4135 , slotted cheese head screws for mpatgm uc is - 1366 m3x8l, aisi 4135 , slotted cheese head screws for mpatgm uc is - 1365 m3x8l, aisi 4135 , slotted cheese head screws for mpatgm uc is - 1366 m3x12l, aisi 4135 , slotted cheese head screws for mpatgm uc is - 1366 m3x16l, aisi 4135 , slotted cheese head screws for mpatgm uc is - 1366 m3x0.5x16l, a2-70 is 1367 part 14 , slotted cheese head screws for mpatgm uc is - 1366 m2x0.5x16l, a2-70 is 1367 part 14 , slotted cheese head screws for mpatgm uc is - 1366 m2x0.5x6l, a2-70 is 1367 part 14 , nut for mpatgm uc is - 1364 m3, aisi 4135 , plain washer b2.4 for mpatgm uc is - 2016 b2.4, aisi 4135, a2-70 is 1367 part 14 , plain washer for mpatgm uc is - 2015 m4 type-b4, 15c4 -c15 , plain washer for mpatgm uc is - 2015 m3 type-b, 15c4 -c15 , plain washer for mpatgm uc is - 1570 part-2- m2 , spring washer for mpatgm uc is - 3063 m3 -type b, spring steel, hv 430 to 530
Tender For supply of set of items for locomotive corrosion repair as per is:2062-2011 grade-e250a. is:1730 for dimension & is 1852 for q uantity tolerance.set consists of 06 items as given below: (1) m s c-channel 75x40x3mm in 6 metres length. quantity -500kg(2) ms flat 40x3mm in 6 metres length. quantity-500kg(3) ms flat 25x3mm in 6 metres length. quantity-500kg(4) ms angle 25x25x3 mm in standard length. quantity-500 kg(5)ms angle 50x50x5mm in standard length. quantity -500 kg(6)ms angle 100x100x10mm in standard length. quantity-500kg [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of items for locomotive corrosion repair as per is:2062-2011 grade-e250a. is:1730 for dimension & is 1852 for q uantity tolerance.set consists of 06 items as given below: (1) m s c-channel 75x40x3mm in 6 metres length. quantity -500kg(2) ms flat 40x3mm in 6 metres length. quantity-500kg(3) ms flat 25x3mm in 6 metres length. quantity-500kg(4) ms angle 25x25x3 mm in standard length. quantity-500 kg(5)ms angle 50x50x5mm in standard length. quantity -500 kg(6)ms angle 100x100x10mm in standard length. quantity-500kg [ warranty period: 30 months after the date of delivery ]