Get complete information related to latest Cs Pipe Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cs Pipe Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cs Pipe Tenders.
Tender For lining-up of an agency for carrying out finning at vendor works on bare cspipes of size 4in, for installation in heaters installed at naphtha cracker unit of panipat naphtha cracker.
Tender For supply, installation and commissioning of csrl pipeline from raw water treatment plant to effluent treatment plant-2 at nfc-kota, rawatbhata.
Tender For supply of materials for the constrcution of sanjivini shed in kallenahalli gp, ajjampura taluk, chikkamagaluru work under mgnregs scheme - broken stone aggregate 40 mm size(kall), broken stone aggregate 20 mm size(kall), broken stone aggregate 12 mm to 10 mm size(kall), coarse sand (zone iii)(kall), portland cement(kall), mixer (concrete) - 1 cum capacity(kall), add watering charges at 1 % on material(kall), formwork, centering & scaffolding for columns & piers(kall), plasticizer / super plasticizer(kall), hom of vibrator 0.71 days(kall), size stone 20 x 20 x 25 cms(kall), bond stone 20 x 20 x 45 cm(kall), boulders(kall), mixer (concrete small used in culvert)(kall), jungle wood runners and planks(kall), silver oak or equivalent planks 38 mm thick(kall), casurina poles 100 - 150 mm(kall), add handling , loading and unloading at 2% on material(kall), add watering charges at 1 % on labour(kall), burnt bricks class 35 (non modular)(kall), add handling , loading and unloading at 1% on material(kall), solid concrete block (40x15x20 cms)- 5.00 n/sqmm(kall), mason class i (with tools)(kall), casurina poles 75 - 100 mm dia(kall), tmt bars fe 500(kall), binding wire(kall), mathi/nandi wood planks for panels 25 mm thick(kall), add cutting and other wastage 5%(kall), hom of machinaries for planing(kall), unit cost as per the specification(kall), honne wood(kall), honnewood planks for panels 20 mm thick(kall), t section(kall), mullion section(kall), ms clamps(kall), handles(kall), hinges 5inch heavy duty(kall), stays(kall), tw beading for fixing glass(kall), reeded glass 2 mm thick(kall), z section(kall), fitter class i(kall), welder grade i(kall), add(kall), ready mix primer paint (ready mix red lead paint)(kall), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint(kall), painter class i(kall), add providing and removing scaffolding at 3% on labour(kall), lime(kall), dry distemper(kall), whitening(kall), add brush, putty, glue at 5% on cost of paint(kall), distemper primer(kall), add brush, putty at 5% on cost of distemper primer(kall), water proofing cement paint(kall), add brush, putty, sand paper at 2% on cost of paint(kall), mason class ii (with tools)(kall), enamel paint(kall), add brush, putty, sand paper at 3% on cost of paint(kall), vitrified tiles 600x600 mm(kall), ceramic tiles 30 x 30 cms(kall), white cement(kall), glazed tiles 300x450(kall), border tiles 30 x 10 cms(kall), add white cement for pointing at 2% on material(kall), indian type water closet of size 580 mm of specified make with footrests(kall), s or p trap 100mm(kall), add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material(kall), white vitreous china clay flat back wash basin size 550x400mm(kall), copper plated brass piller tap 15mm(kall), cp brass chain with plug(kall), cp brass waste 32 mm of standard pattern(kall), brass stop cock(kall), c.i. / m.s. brackets for flushing cistern(kall), lead or pvc connection pipe 32mm dia (for wash basin)(kall), licenced plumber with tools(kall), polyenthylene water storage tank of specified capacity l(kall), labour charges for lifting and placing in position and making connection at 7% on material(kall), handling loading and unloading 3% on material(kall), pvc pipe of 10kg/cum,110 mm(kall), pvc pipe of 6kg/cum,63 mm(kall), pvc pipe of 4kg/cum,75 mm(kall), add cement sand and grit 1% on material(kall), add 5% for fittings and wastage charges(kall), polythylene pipes high density 32mm external dia(kall), bib cock 20mm nominal bore(kall), cost of 6.5mm m.s. coil(kall), fabrication charges.(kall), transportation charges of materials beyond 5 km at 10%(kall), labour charges for handing errection of rcc rings etc. at 5%(kall)
Tender For corrigendum : design, engineering, manufacturing, procurement of materials and bought out components, assembly at shop, testing at manufacturers works, inspection by tpia, packing, supply of cs-pipes (mto-3)
Tender For supply of vitrified tiles laid with cement based high polymer , vitrified tiles laid with cement mortar , ceramic glazed wall tiles , grouting the joints of flooring tiles , providing and fixing aluminium work -for shutters of doors, windows , providing and fixing aluminium work- for fixed portion powder coated aluminium , providing and fixing 12 mm thick prelaminated particle board , providing and fixing glazing - with float glass panes of 4.0 mm thickness , providing and laying structural steel work riveted , 24 mm thick factory made pvc door shutters , 35mm thick isi marked flush door , providing and fixing in position collapsible steel shutters , providing and fixing 18mm thick pre-laminated medium density fibre board , providing sal wood work in frames , providing and fixing 15mm normal bore g.i. union , providing and fixing 20mm normal bore g.i. union , providing and fixing white vitreous china pedestal type water closet , providing and fixing water closet squatting pan , providing and fixing wash basin with c.i. brackets , providing and fixing white vitreous china urinal basin , providing and fixing one piece construction white vitreous china squatting plate , providing and fixing 600x450mm bevelled edge mirror , providing and fixing 600x120x5 mm glass shelf , providing and fixing ptmt towel rail complete with brackets , providing and fixing ptmt liquid soap container , providing and fixing 15 mm bided or jet spray , providing and fixing c.p. brass shower rose , providing and fixing c.p. brass stop cock , providing and fixing c.p brass close hole wall mixer tap , providing and fixing 15 mm nominal bore c.p brass angle valve , 75 mmwaste and vent pipes , 100 mm waste and vent pipes , providing and fixing c.p. brass bib cock , demolishing cement concrete , dismantling old plaster or skirting raking out joints , providing and laying plain cement concrete 1 is to 3 is to 6 , providing and laying in position cement concrete of 1 is to 2 is to 4 , providing and laying 1st class brick work with bricks of class designation 75 , half brick masonry with common burnt clay , providing and laying 12 mm thick cement plaster 1 is to 6 , providing and applying two coats of white washing with lime on old work , providing and applying white cement based putty , providing and applying one coat of cement primer , providing and applying wall painting , supplying and laying two or more coats painting with synthetic enamel paint , earth work in excavation in foundation, , providing and fixing centering and shuttering , providing and fixing 18 mm thick granite
Tender For providing of custom bid for services - mrpl tender no 3900001584 and service code 1037499 for cspipe 70s2 7018 welding upto 12 mmthk as per sow and boq and in gem overall total lump sum rate to be quoted considering 450 inch diameter length including gst,custom bid for services - service code 1043060 for erection and dismantling of cspipe as per sow and boq and in gem overall total lump sum rate to be quoted considering 600 inch meter length including gst,custom bid for services - service code 1043061 for erection and dismantling of scaffolding as per sow and boq and in gem overall total lump sum rate to be quoted considering 1800 cubic meter volume including gst,custom bid for services - service code 1043062 for hydrotesting of pipelines as per scope as per sow and boq and in gem overall total lump sum rate to be quoted considering 9000 inch meter length including gst,custom bid for services - service code 1043063 for flange spading despading for hydrotest as per sow and boq and in gem overall total lump sum rate to be
Tender For supply meterials of sanjeevini shed at katuvalli - katgp silver oak or equivalent planks 38 mm thick, katgp jungle wood runners and planks, boukatgp lders, katgp bond stone 20 x 20 x 45 cm, katgp size stone 20 x 20 x 25 cms, katgpplasticizer / super plasticizer, katgp portland cement, katgp coarse sand (zone iii), katgp broken stone aggregate 12 mm to 10 mm size, katgp broken stone aggregate 20 mm size, katgp broken stone aggregate 40 mm size, katgp water proofing cement paint, katgp distemper primer, katgp whitening, katgp dry distemper, katgp lime, katgp ready mix primer paint (ready mix red lead paint), katgp add, katgp z section, katgp reeded glass 2 mm thick, katgp tw beading for fixing glass, katgp stays, katgp handles, katgp ms clamps, katgp mullion section, katgp t section, katgp honnewood planks for panels 20 mm thick, katgp honne wood, katgp unit cost as per the specification, katgp hom of machinaries for planing, katgp mathi/nandi wood planks for panels 25 mm thick, katgp binding wire, katgp tmt bars fe 500, katgp casurina poles 75 - 100 mm dia, katgp burnt bricks class 35 (non modular), katgp casurina poles 100 - 150 mm, katgp fabrication charges., katgp cost of 6.5mm m.s. coil, katgp bib cock 20mm nominal bore, katgp polythylene pipes high density 32mm external dia, katgp pvc pipe of 75 mm, katgp pvc pipe 63 mm, katgp pvc pipe 110 mm, katgp polyenthylene water storage tank of specified capacity l, katgp lead or pvc connection pipe 32mm dia (for wash basin), katgp c.i. / m.s. brackets for flushing cistern, katgp brass stop cock, katgp cp brass waste 32 mm of standard pattern, katgp cp brass chain with plug, katgp copper plated brass piller tap 15mm, katgp white vitreous china clay flat back wash basin size 550x400mm, katgp 100mm sp trap, katgp indian type water closet of size 580 mm of specified make with footrests, katgp border tiles 30 x 10 cms, katgp glazed tiles 300x450, katgp white cement, katgp ceramic tiles 30 x 30 cms, katgp vitrified tiles 600x600 mm, katgp enamel paint, katgp hinges 5 heavy duty, katgp solid concrete block