Latest cubicle partition Tenders | Government cubicle partition Tenders

Central Government And Public Sector

CTN :43276313

29 Dec, 2025 NA

Hyderabad-T - Telangana

Tender For supply of wpc frame ( 4 ^ prime prime *3^ prime prime ) ft length , 33mm wpc door shutter ( 263 "*81") , 5" ss hinges , 8" aluminum tower bolts , 10 ^ prime prime aluminum aldrops , 6 ^ prime prime aluminum handles (with screws) , 1/4 ^ prime prime screws , 1/4 ^ 31 screws , aluminum double door stopper , screws for frame fixing , ewc seat cover (parrywareslimline) , flush tank (parrywareslimline) , cp health faucet (parryware) , urinal waste pipe , 1 " x 24" pvc connection (kohinoor) , syphon set (hindware italian 1 piece) , cp hole jali , " cp pillar cock head (jaguar) , plastic emulsion white (asian paint) , birla putty , amber brush 5" , 10" cotton roller (asian paint) , water base primer (asian paint) , fast voilet stainer (asian paint) 100ml , cement (kcp cement) -50 kg , 2"x10" cpvc pipe(make: ashirvad) , 2" cpvc bend (make: ashirvad) , 2" cpvc elbow (make: ashirvad) , 2" cpvc mabt (make: ashirvad) , 2" cpvc fabt (make: ashirvad) , 2" cpvc coupling (make: ashirvad) , 2" g.i bend (make: tata) , 2" g.i coupling (make: tata) , teflon tape , 118 ml cpvc solvent paste (make: ashirvad) , cement (make: kcp cement) , sand

CTN :43220390

24 Dec, 2025 20.00 Lacs

Rupnagar - Punjab

Tender For renovation of research lab no.1 (room no 217) at 1st floor of department of chemistry in p.u. campus, sec-14, chandigarh - supply of furniture/fixture fittings, island laboratory table for overall dimension 4800mm(l)x1500mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) on each side of one drawer & below it twin swing door, 2nosstorage of cabinet of 600mm(l)having a swing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of thelab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 4200mm(l)x750mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 6600mm(l)x750mm(w)x900mm(h)modular table shall consist of 6 nos storage cabinet of 750mm(l) twin swing door, 2nos storage of cabinet of 600mm(l)having aswing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of the lab table shall be provided with lockingfacility. the body of storage of cabinet should be made of 0.8mm thick crca ms sheet havingdouble side wall and door should be 16mm to 18mm thick with square edges made of 1mm thick crca ms sheet. the swingdoor should be affixed with zero crank hydraulic steel hinges and drawers move on ball slide tetescopic channels. handles of theshutter should be pvc recessed. each storage cabinet sink module should be provided with base frame madefrom30x30x1.2mm crca square pipe having nylon adjusters. the thickness of granite shall be 18mm if required at site., wall side laboratory table for overall dimension 2400mm(l)x750mm(w)x900mm(h)modular table shall consist of 2 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. or equi

Central Government/Public Sector

CTN :42887331

27 Dec, 2025 NA

Roorkee - Uttarakhand

Tender For corrigendum : certain repair to b/r and e/m items in zone c under ge roorkee - demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed., m&l for brick work, with class b brick straight or curved on plan to any radius built in cement mortar (1:6) as in raising of manholes and septic tanks complete all as specified and directed, taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:4 complete including mixing water proofing compound complete all as specified and directed, supply only water proofing compound complete all as specified and directed., m&l for rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:6 complete all as specified and directed, m&l for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed, m&l for preparing newly plastered surface of wall and applying two coats of oil bound distemper complete all as specified and directed, m&l for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coat of cement base paint inluding one mm thick cement base putty complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces inluding one mm thick cement base putty all as specified and as directed. (note: painting of overhead tank min height 18 to 25 meter), m&l in repair for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm thick with pressed steel shutter 1mm thick godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement spray painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm (1:3) or pcc (1:2:4) type b-0 complete all as specified and directed., s&f in repair 110 mm dia pvc (swr) bends any radius with oval access door complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) bends with access door any radius complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to w

CTN :43123577

22 Dec, 2025 82.01 Lacs

Udhampur - Jammu And Kashmir

Tender For corrigendum : supply of engineer and fabrication work size 18 by 12 height 6 point 35 meter to 8 meters including fire sprinklers , dock area 7 by 4 meters , office area of 3 by 3 , ramp for forklift , canopy to cover complete docking and ramping area , vertical elevation from flooring , repository design , lighting conduit laying of pvc electrical conduit pipe 25mm by 32mm , wiring copper wire size 1 point 5 by 3 by 6 , board switch and sockets , lights and fans , lighting arrestor , earthing chemical earthing electrode , workstations including table chair almirah and other necessary items , split air conditioner , cctv surveillance system , rolling shutter door for warehouse , manual door , biometric access , office area entry door , fire line , fire hose reel and fire hydrant , sprinkler , smoke detector , fire pump , fire tank 25000l , solar system , electric forklift , project management consulting, project management execution and installation and commissioning and freight and training

Central Government/Public Sector

CTN :43236954

07 Jan, 2026 26.44 Lacs

Aurangabad-Mh - Maharashtra

Tender For supply of supply of electrical spares for day to day maintenance at jalgaon airport d d - icu-36 ka , 125 amps, fpmccb, ics-100 percent icu-36 ka , 160 amps, fpmccb, ics-100 percent icu-36 ka , 200 amps, fpmccb, ics-100 percent icu-36 ka , supplying of following rating - 6amp, sp, 10ka, mcb, c series , 10 amp, sp, 10ka, mcb, c series , 16 amp, sp, 10ka, mcb, c series , 32 amp, sp, 10ka, mcb, c series , 16 amp, dp, 10ka, mcb, c series , 32 amp, dp, 10ka, mcb, c series , 40 amp, dp, 10ka, mcb, c series , 63 amp, dp, 10ka, mcb, c series , 32 amp, tp, 10ka, mcb, c series , 40 amp, fp, 10ka, mcb, c series , 63 amp, fp, 10 ka, mcb, c series , supply of following type rccb - 40 amp, dp rccb, 100ma , 40 amp, fp rccb, 300ma , 63 amp, fp rccb, 300ma , supply of following ways double door surface recessed mounting vertical type04 way 8 plus 12, double door , 08 way 8 plus 24, double door , 12 way 8 plus 24, double door , supply of following integrated led pilot - red colour , yellow colour , green color , blue color , supply of cordless bell with remote suitable for 230v , supply of ding dong bell suitable for 230v , supply of 20mm size of pvc, isi marked casing capping , supply of 25mm size of pvc, isi marked casing capping , supply of pvc pipe 20 mm medium duty , supply of pvc pipe 25 mm medium duty , supply of pvc elbow for 20mm dia , supply of pvc elbow for 25mm dia , supply of pvc coupler for 20mm dia , supply of pvc coupler for 25mm dia , supply of pvc tee for 20mm dia , supply of pvc tee for 25mm dia , supply of pvc bend for 20mm dia , supply of pvc bend for 25mm dia , supply of 20 mm pvc junction box 1 way , supply of 25 mm pvc junction box 1 way , supply of 20 mm pvc junction box 2 way , supply of 25 mm pvc junction box 2 way , supply of 20 mm pvc junction box 3 way , supply of 25 mm pvc junction box 3 way , supply of 20 mm pvc junction box 4 way , supply of 25 mm pvc junction box 4 way , supply of pvc saddle of 20 mm dia , supply of pvc saddle of 25 mm dia. , supply of 20mm fire retardant polypropylene , supply of 25mm fire retardant polypropylene , supply of 6 or 16 amp, 5-in-1 switch-socket box with 4 fixing hole , supply of 4 way extension board 6 a, 240v, 1. 5 metre high quality , supply of 2. 5 mfd plastic capacitors with wire terminals for fans , supply of bee 5-star rated 1200 mm sweep ceiling fan with copper wound brushless , supply of 250mm fresh air or ventilation fan with shutter, plastic body , supply of bee 5star rated, 15 liters capacity storage type geyser suitable , supply of bee 5-star rated 188 l, single door direct cool refrigerator , supply of single phase 230 volts, 50 hz, horizontal double mounting , supply of single phase 230 volts, 50 hz gong bell, , supply of ip-65, aviation obstruction led luminaire consisting of die-cast aluminium , supply of weather proof ip-66 sheet moulded compound smc box

CTN :43241767

08 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of flush door with vision panel , glass door in main entrace , gypsum false ceiling , painting , luggage rack , wardrobe shutter changing work

Central Government/Public Sector

CTN :43259089

10 Jan, 2026 81.2 Thousand

Delhi - Delhi

Tender For replacement the shutter door (entrance door) of premchand archives gallery and literary centre at ibn-e-sina block dr. zakir hussain library, jamia millia islamia.

CTN :43218033

06 Jan, 2026 12.48 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For supply of stone aggregate single size , coarse sand zone iii , portland cement , cement concrete block , r r stone , ms items , acrylic exterior paint , acrylic exterior primer , painting brush 6 5 and 4 , ready mixed pink or grey primer , synthetic enamel paint , 60 mm puf pannel for roof , 16mm thick poly carbonate sheet on roofing 3 layer , iron cutter blade 100 mm , iron cutter blade 300 mm , weding rod , self drilling screw 40mm , 1mm thick ms sheet steel door shutter with frame

State Government

CTN :43218495

08 Jan, 2026 3.09 Crore

Dibrugarh - Assam

Tender For reconstruction of damaged floor and platform with vdf process, construction of electrical panel room and installation of mesh door infront of rolling shutter

Central Government/Public Sector

CTN :42968902

25 Dec, 2025 45.00 Lacs

Budgam - Jammu And Kashmir

Tender For corrigendum : ge (af)/sgr-63/2025-26 repair / replacement to joinery, wall panelling, collapsible gate, aluminum partition, rolling shutter, windows, door, false ceiling and other miscellaneous works at technical area under ge (af) srinagar

Cubicle Partition Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector