Latest cushion seat Tenders | Government cushion seat Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38557738

05 Feb, 2025 NA

Cooch Behar - West Bengal

Tender For supply of dog equipment - grooming brush big , grooming gloves , comb plastic , neck collar nylone , harness , coat water proof , muzzle cover , nail cutter , ground sheet , blanket , torch , digital thermomeater , tracking less , towel hand , rubber ball , rubber bone , less nylone , less rope

Central Government/Public Sector

CTN :38591436

03 Jan, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of light weight ground sheet (tpo coated) (q2)

CTN :38555911

03 Jan, 2025 NA

Jalandhar - Punjab

Tender For tender for supply of cusion with cover 21inchx22inchx4inch , cover for cushion 550x525x100mm , seat cushioned foam 21inchx22inchx4inch 40 density , cushion seat with rexine cover for chair dining cushion , leg of charpoy gi pipe 32mm and 408mm length duly threaded at one end , cushion back with rexine cover for chair easy cushion as per fd-358 , cushion seat with rexine cover for chair wrting cushion as per fd-1107 , cushion back with rexine cover for chair wrting cushion as per fd-1107 , cusion with cover for stool dressing lades (map) as per fd/map-ii/07. , pvc seat and back for chair varandah fd/map-ii/06 , back for chair steel made of shesham and duly canned by 2mm half round plastic cane 4mm (ref drg fd-75(m) , plywood 8inchx4inchx12mm one side teakface , plywood teakface 8inchx4inchx6mm , long rail gi 32mm for gi chorpoy size 2 mtrs long both side duly threaded , tape newar nylon 50mm wide. , plywood 8inchx4inchx9mm thick bwr commercial , short rail gi 32mm for gi chorpoy size 900 mm long both side duly threaded , plywood bwr commercial 8inchx4inchx12mm , plywood 8inchx4inchx4mm one side teak face , plywood 6feetx4feetx19mm , plywood 7feetx3feetx12mm , plb 2400 x 1200 mm x19mm , lakh dana , handle cp for almirah steel 100mm , gi tubing 32mm , pvc seat for chair dining make amko as per fd/map-ii/05 , handle ss for locker steel , plywood commercial 8feetx3feetx19mm , light siller (nc sanding) , plywood 8feetx4feetx4mm , pre laminated particle board 2.75x1.83x18mm thick , shocker (hydraulic spindle) for chair revolving , pvc shoe for chair with screw as per sample. , gi elbow 32 mm 3 way , paint white enamel , handle for table bed side , lock 50mm for almirah med steel , touch wood , plywood 6feetx4feetx9mm , spirit dentured best quality , lock for almirah steel medium 75mm , pvc base for chair revolving with wheel , bwr plywood 1800x1200mmx12mm , paint synthetic enamel olive green , fevicol sh , lock for steel almirah large 77mm , telescopic channel 14inch long , turpentine oil , thinner , telescopic channel 8inch long , fevicol sr , pvc bush for chair visitor , french polish , hessian cloth 48inch wide clossly woven , cloth malmal , mr plywood 2400 x 1200 x 6mm , teakwood beading 6mm thick 18mm wide , paint synthetic enamel black , palmet patti , asian paints liquid varnishes or shellac varnish , screw wood 35mm (gypsum) (100nos/pkt) , screw wood steel 50mm (gypsum) , bwr plywood 1800x900mmx12mm , screw wood 45mm (100nos/pkt) (gypsum) , paint se smoke grey , paint brush 75mm , paint brush 50mm , looking mirror for table dressing gents760x380x5mm , knob fancy in teak shade , emery paper no-120 , screw wood steel 40mm (gypsum) , wooden scantling 75x25x2000mm long , nails wire 75mm , hasp & staple cp 2inch , nails wire 32mm (headless) , screw 75mm , pvc arms for chair visitor , emery paper no-100 , paint brush 25mm , teakwood beading 4mm thick 18mm wide , bow handle aluminium 100mm , nails wire 20mm , nails wire 50mm 14 no , screw wood steel 65mm (gypsum) , screw wood steel 25mm(100nos) (gypsum) , nails wire 1/2inch head less 18 no , nails wire 50mm , nails wire 40mm 14 no , nails wire 100mm 14 no , screw wood steel 30mm (philips head)

CTN :38589131

04 Jan, 2025 NA

Pune - Maharashtra

Tender For supply of lv2 icvs 2540-009368 675-60-sb132 cushion seat, vehicular,lv2 icvs 2540-009368 675-60-sb132 cushion seat, vehicular,lv2 icvs 2540-009368 675-60-sb132 cushion seat, vehicular,lv2 icvs 2540-009368 675-60-sb132 cushion seat, vehicular,lv2 icvs 2540-009368 675-60-sb132 cushion seat, vehicular,lv2 icvs 2540-009368 675-60-sb132 cushion seat, vehicular,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765-10-1079 gasket,special,lv2 icvs 5330720423588 765

Central Government/Public Sector

CTN :38569347

16 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For supply of high back chair foamed with cushioned seat and back rest with nylon mesh type and head r est. revolving with hydraulic arrangements fiber base with wheel. size : 590 mm (l) x 630 mm (d) x 970 mm (h) [ warranty period: 12 months after the date of delivery ]

CTN :38319163

18 Dec, 2024 NA

Nainital - Uttarakhand

Tender For corrigendum : upgradation of urc display shed area--a) provision and installation of roof for inverted v shape structure, hall of size 90' x 74' = 6660 sqft to include., (i) colour coated cgi sheet of 0.4 mm of size (3.5 x16 ft) approx. qty of sheet 130, with ridge of 2x 90 ft along top of roof., (ii) minimum 2 ft of cgi sheets should come outside the walls (iii) min one ft of overlap of sheets at every joint while installation., (iv) fitting of whole structure of roof with cgi sheets including labour, transportation and electricity cost., b) provision and installation of tilling of display shed tile size 2' x 2' ft, vitrified tile (kajaria brand) of premium quality size approx. 5000 sqft to include., (i) dismantling and demolition of existing damaged tile., (ii) leveling of ground and sand cement mixture of 2.5 inch and fitting of tiles., c) 25 x new generation fmcg display racks of 6 ft height. specification of each rack is as under :- (i) pillar 72 inch, (ii) shelves 12" x 36" inch, (iii) shelves 15 x 36 inch, (iv) shelves 18 x 36 inch, (v) back panel 13 x 36 inch, (vi) back panel 4 x 36 inch, (vii) brackets 12 inch, (viii) brackets 12 inch, (ix) stopper

CTN :38538540

18 Dec, 2024 NA

Multi City - Multi State

Tender For supply of wooden chair made of teak wood with cushion seat and back with pol ishing complet [ warranty period: 30 months after the date of delivery ]