Latest cutter pick Tenders | Government cutter pick Tenders

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

CTN :45003952

18 May, 2026 3.60 Crore

Bhadradri Kothagudem - Telangana

Tender For procurement of tungsten carbide cutter picks on open enquiry through tender cum reverse auction.

CTN :44952907

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/s-yd/10/04/26-27/bg/cond./8w/emu motor coach and trailer coach description- iron and steel scrap cutup parts of bg cond./8w/emu motor coaches and trailer coach with or without n.f attachment, without contents if any. 1) se 10633 emu-mc 2) se 10632 emu-mc 3) se 10635 emu-mc 4) se 10636/108636 emu-mc 5) se 10954/108954 emu- tc 6) se 10950/108950 emu-tc nb: [1] (a) 04 emu motor coaches are to be sold without : i) buffers. ii) screw coupling. iii) bearing bolt. iv) draw and buff gear. v) draw hook with collar. vi) semi permanent coupler end -a. vii)semi permanent coupler end -b. viii) draw and buffer gear. ix) centre pivit pin top bush. x) centre pivot pin bottom bush. xi) wearing piece. xii) compensating ring. xiii) wheel sets 16 nos. xiv) oil pump motor. xv) radiator motor. xvi) rectifier cooling motor. xvii) transformer. xviii) choke tank (sl, tl & dl). xix) traction motor complete with pinion. xx) suspension brass bearing. xxi) auxilary compressor. xxii) battery charger. (b) 08 nos.bogie frames(trolley) are to be sold with fittings without primary suspension against srl no.01 to 04 . nb:[2]: emu trailer coaches are to be sold without 08 nos wheel sets along with roller bearing against srl no 05 and 06 and 04 nos bogie frame with complete fittings against srl 05 and 06 and other excluded fitting list as per latest excluded fittings /coach 1271 dated 13.09.2018. nb: [3] special condition for rolling stock- a) all excluded materials including wheel sets and bogie's fittings are to be handed over by the purchaser at the nominated location for which they have to arrange labour /tools/ equipment for loading of the excluded items from cutting site and then transport to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28 trolley, coil spring, screw coupling, buffer sets etc. (ii) sse-19 wheel sets (iii) sse-30 ep unit (iv) sse-53 & 56 other emu items to be hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser has cleared all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:[4] 24 nos. wheel sets with complete fittings and with excluded fitting (released item) and 04 nos.bogie frame with complete fittings are to be handed over by the purchaser to concerned location as advised by concerned sse. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys. [custodian/stock holder - sse-emu-56 for motor coaches and sse-carraige-kgpw for tc coaches]

CTN :44952915

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/21/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) sc 057422/c gs 2) se 058413 gs 3) se 058414 gs 4) sc 037231/c wgscn 5) se 058254 wgscn 6) se 058227 wgscn nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos. serviceable bogies against srl no: 01-01 (end-1), srl no.02-01 (end-2), srl no.04-01 ( end-1) and srl no. 06-02 (both bogies are serviceable) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-01, srl no 02-01, srl no.03-02, srl no 04-01 and srl no 05-02nos. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44952916

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/22/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058802 wgcb 2) cr 054534 wgscn 3)wr 052380 wgscn 4) er 022337 wgscn 5) ec 024283 gs 6) nr 05272 wgscn 7) se 048702 gslrd nb: [1]. (a) all coaches are to be sold without 28 nos. wheel sets complete alongwith roller bearing against srl no 01 to 07 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against srl no: 04-02 (both bogies are serviceable) (c) the coaches are to be sold with 12 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 02-02, srl no.03-02, srl no 05-02, srl no 06-02nos and srl no 07-02. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 02 nos of bogies with complete fittings & 28 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44942569

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/09/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 008839 vph 2) se 908914 rs 3) se 908915 rs 4) se 908981 art/rhv 5) se 918921 ce 6) se 898964 art/sv nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos.serviceable bogies against srl no: 02-02 (bogie no.1831/07 & scn 057/15), srl no.05-02 (bogie no accw 5143/04 & 052360/05), srl no.06-01 ( bogie no. scn 1366/14) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 03-02, srl no.04-02, and srl no 06-01no. (d)the coaches are to be sold with 04 nos. ng rail. against srl no.02 and 03. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44802785

21 Apr, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : tender for supply of c14m260020 procurement of special tools - bearing fitting tool kit tmft -36 , skf heavy duty jaw puller tmmp 6 , skf heavy duty jaw puller tmmp 10 , puller , bearing hydraulic , 20 tonnes cap. , jack , hydraulic , button type , 50 ton , hydraulic hand pump single cyl , 5t-100t , hyd hand pump , operating press 700bar

CTN :44630934

15 Apr, 2026 10.00 Lacs

Vadodara - Gujarat

Tender For supply of crimping tool , wire cutter and stripper , contactor and auxiliary contacts , hydrometer , hand drill machine , knife switch dpdt , knife switch tpdt , earth plate , earth electrode , mccb , elcb , rccb , rheostat sliding type , various type lamp , bus bar with brackets , rubber mat , digital multi meter , milli voltmeter , ammeter mc analog , ac ammeter mi , digital wattmeter , power factor meter digital , magnetic flux meter , tachometer , megger , 3 point dc starter , 4 point d.c. starter , ac starters , function generator , soldering iron , discrete component trainer , smart meter , measuring steel tape , combination plier insulated , screwdriver insulated , electrician screwdriver , heavy duty screwdriver insulated , electrician screwdriver , punch centre , knife double bladed electrician , neon tester , steel rule , hammer cross peen with handle , scissors , garment hangers , seam ripper , tailor s card scale triangular , tailors square , french curve , thread cutter , scale plastic , measuring tape , multi meter , ammeter mi , ammeter mc , solid state solar based single phase energy meter bidirectional , ammeter mi , ammeter mc centre zero , lux meter , hydraulic crimping tool , bar magnet , small crimping tools assorted , rubber matting , set of wall jumper octagonal , pliers round nose insulated , firmer chisel , gauge wire , file flat , pipe vice , insulators including hardware fitting , electrician helmet , safety belt , solar street light , solar traffic light , solar dc pump , lead acid battery 75ah , solar street light lamp set , steel rule , terminal screw driver , knife electrician , hammer ball peen , plumb bob , combination pliers insulated , try square , spanner set de , screw driver set set of 5 , file round 2nd cut , soldering iron , steel measuring tape , bradawl , set of rowel punch , wooden mallet , wheostone bridge , belt tensioner gauge , different type of engine bearing model , different type of piston model , drill twist various sizes , growler , hacksaw frame , hammer mallet , hand vice , injector testing set hand tester , left cut snips , oil stone , oscilloscope , dividers with spring , pliers combination , spindle key , hammer sledge , ss tape , multiangle magnetic clamp set , vernier caliper , drill twist taper shank , taps and dies complete set , file feather edge smooth , file triangular smooth , file square second cut , file triangular second cut , file half round second cut , file half round bastard , file round bastard , file hand second cut , file card wire brush , pliers combination insulated , clamp c , scraper flat , scraper triangular , scraper half round , power tools for fastening , different profile gauges , knurling tool , indexable boring bar with inserts , standard tap screws , lapping plate , drill gauges , cast iron globe valve flanged type , ci sluice gate valve flanged type , stop cock , slip on forged steel flange , pulleys for v-belt or flat belt , hollow punch , bearing extractor , pulley extractor , flat headed hammers with handle. , planishing hammer. , snip bent left cut , stake hatchet with leg , arm strong type tool bit holder , try square , scriber , file flat second cut , hacksaw frame fixed type crimping tool, wire cutter and stripper, contactor & auxiliary contacts., hydrometer, hand drill machine, knife switch dpdt fitted with fuse terminals, knife switch tpdt fitted with fuse terminals, earth plate, earth electrode, mccb, elcb, rccb, rheostat (sliding type), various lamps, bus bar with brackets, rubber mat, digital multi meter, milli //bid details 2 / 112

Cutter Pick Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government