Latest cutting tools Tenders | Government cutting tools Tenders

CTN :44530773

25 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1, bobrnm1, boxnr, boxnm1 & bobrm1 wagons no as following: [1] ser 30078963020 bcnm1 [2] er 72029678980 bobrnm1 [3] er 25029660899 boxnr [4] er 10029661281 boxnm1 [5] scr 10099662737 boxnm1 [6] er 72029561275 bobrnm1 [7] ser 25079662478 boxnr [8] er 72029661159 bobrnm1 [9] er 72029662002 bobrnm1 [10] cr 72019360383 bobrm1 [11] nr 10039660588 boxnm1 [12] ser 10079649802 boxnm1 condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (144.640 mt) is the lot quantity (144.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for bcnm1, boxnr & boxnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii)for bobrnm1 & bobrm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl no. 05 and 08 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :44530775

25 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bvzc wagons no as following: [1] scr 85099660762 bvzc [2] er 85029660251 bvzc [3] er 85020160019 bvzc [4] nr 85039660418 bvzc [5] ser 85079704424 bvzc [6] cr 85019960026 bvzc [7] secr 85140439545 bvzc [8] special repair 85060460087 bvzc [9] nr 85030150413 bvzc [10] special repair 85069757119 bvzc condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (92.350 mt) is the lot quantity (92.350 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- for bvzc : wheel set with rb and axle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

Central Government/Public Sector

CTN :44483303

06 Apr, 2026 44.20 Lacs

Muzaffarpur - Bihar

Tender For supply of cutting tools d d - heavy duty motorized tree cutting for ara , bush cleaning machine for ara , heavy duty motorized tree cutting for biharsarif , bush cleaning machine for biharsarif , heavy duty motorized tree cutting for kahalgaon , bush cleaning machine for kahalgaon , heavy duty motorized tree cutting for lakhisarai , bush cleaning machine for lakhisarai , heavy duty motorized tree cutting for gaya , bush cleaning machine for gaya , heavy duty motorized tree cutting for jamshedpur , bush cleaning machine for jamshedpur , heavy duty motorized tree cutting for muzaffarpur , bush cleaning machine for muzaffarpur , heavy duty motorized tree cutting for patna , bush cleaning machine for patna , heavy duty motorized tree cutting for purnea , bush cleaning machine for purnea , heavy duty motorized tree cutting for ranchi , bush cleaning machine for ranchi , heavy duty motorized tree cutting for pusauli , bush cleaning machine for pusauli , heavy duty motorized tree cutting for daltonganj , bush cleaning machine for daltonganj , heavy duty motorized tree cutting for koderma , bush cleaning machine for koderma , heavy duty motorized tree cutting for new ranchi , bush cleaning machine for new ranchi , heavy duty motorized tree cutting for maithon , bush cleaning machine for maithon , heavy duty motorized tree cutting for raurkela , bush cleaning machine for raurkela , heavy duty motorized tree cutting for gopalganj , bush cleaning machine for gopalganj

Central Government And Public Sector

CTN :44505788

20 Mar, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of others - released and unserviceable one number steel lattice tower structure (flood light tower). (a) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.(b)) post auction no representation shall be entertained. (c) the lot to be sold on as is where is basis. (d) lots to be sold and delivered on actual weight basis in any govt. approved road weigh bridge. (e)1. safety briefing: conduct a thorough safety briefing to all the personnel involved. ii. securing the area: temporary barricading shall be provided on all four sides of lattice tower for suitable working area and to restrict unauthorized access to the site. where not feasible, alternative measures shall be adopted such as deputing personnel to avoid unauthorized entry, warning tapes or boards. continuous supervision of electrical and engineering supervisor shall be adopted during dismantling of lattice tower; it must be ensured that area around the tower is clear and free from any obstruction. iii. equipment preparation: necessary equipment required: (a) climbing stairs (generally available with the lattice tower) (b) electrical operated cutting tools (hand grinder, saws) with suitable generator set. (c) lifting equipment (rope, pulleys etc.) (d) personal protective equipment (safety helmet, safety belt, protective glasses, hand gloves, jacket etc.) (e) any other requisite equipment to complete the job. iv. pre- intimation to concerned departments: pre-intimation in prescribed format hard copy should be sent to concerned departments regarding date and duration fixed for dismantling of structure in prescribed proforma of joint assessment as -1. station yard- 2.location- 3. kilometer ¿ 4.name and address of firm carrying out dismantling work- 5.height of tower structure im meter- 6.condition of foundation and structure supporting bolt ¿ 7. availability of flood light fittings (nos. & wattage) - 8. power supply cable (type and size)- 9. dismantling of cable required (in m)- 10.1. any other asset on tower that needs to be removed 2.. any other asset near tower that needs to be dismantled. 12 distance from adjacent tracks (in m) 12 proximity from ohe structure (in m)- 13 barricading possible (yes/no)- 14. power block required. if yes, duration- 15.traffic block required. if yes, duration- 16. location for storing dismantled ms scrap- 17 any infringement- 18 any other remarks- signature of firm's representative at site-

CTN :44340069

19 Mar, 2026 60.0 Thousand

Surendranagar - Gujarat

Tender For corrigendum : providing of biomedical waste management service - weight basis - collection, lifting, transportation, disposal, treatment, seggregation; military hospital; polycarbonate jars, white puncture proof containers, needle cutters, manual hub cutter, trolleys, wheel ba..

corporations/Associations/Others

CTN :44459626

25 Mar, 2026 NA

Mysore - Karnataka

Tender For auction sale of ms scrap of condemned damanged structural items,m.s.melting scrap,m.s.turning boring scrap,scrap of c.i boring m.s. turning boring mixed,scrap of c i boring m s turning boring mixed with mud,scrap of rubber items,ms scrap,ms scrap of obsolete m.s. fuel tanks hydraulic tanks,scrap of condemned operator seats,scrap of rubber,m.s.scrap,scrap of used welding coil spools,scrap of condmened nh cnc lathe,scrap of used voltas diesel forklift-3ton,ms scrap,scrap of used battery operated platform truck-3 wheeler,scrap of condmened portable air compressor elgi make,scrap of condmened damage lancer boss,scrap of electrical items,scrap of protective covers guards,scrap of condemnedused unserviceable cutting tools,scrap of condemned tungsten carbide inserts,scrap of condemned consisting of various metal,electronic waste,scrap of condemned unserviceable bearings,scrap of used lead-acid batteries dry batteries,scrap of condemned equipment parts made of alluminium,scrap of condemned 100kva dg set,ms scrap of condemned hydraulic cylinders,scrap of condemned seamless ms tubes,m.s scrap,scrap of condemned ms hydraullic tube structures,m.s. scrap,scrap of used oil,scrap of used empty plastic oil barrels,scrap of used empty ms grease barrels

CTN :44261201

14 Mar, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of te02875 cap screw 0. 75 x 1. 75 ispl plate-d05 , j950010 nut m10 x 1. 5 plate-h01 and 04 mk-i , 19m8001 cap screw ispl plate d01 , t33089 washer plate d01 , u43792 shank ispl plate-k04 , 40m17180 snap ring , 5870300003 back up tool , 5870345056 thrurst ring , 5870345049 assembly jig , 5870200057 dial indicator , 21825555 adj pilot for valve cutters smt-31 , 1420521001 control rod stop , 5870105005 belt wrench , 21825632 cutter for 30o smt-33 , 21825631 cutter for exhaust valve seat smt-32 , 5870026023 grab sleeve , 5870200046 straightedge , 5870200082 measuring cover , 5870610005 insert , 5870610001 wheel stud puller , 5870950116 screw joint coupling 9 by 26 inch smt-28 , 5870058061 driver , 21825619 handle set for water pump smt-30 , 2915012007 hexagon nut , 4661175004 coupling sheet 3 , t147269 plate plate d01 , 4660001018 gearbox housing, gearshift syst 4wg-92s4 john de , 5873000029 grab sleeve , 5873001033 grab sleeve , 5873001032 grab sleev , 5873001036 grab sleeve , 5870300007 internal puller , 5870200055 magnetic stand , 5870000077 ejection tool , 5870340029 gauge ring smt-29 , 5870000079 yoke , 5870200080 gauge block 200mm smt sl-23 , 5870200022 straightedge smt sl-22 , at169780 rear axle fig d 01 , 5870240025 clamping yoke smt-25 , 5870287007 high pressure pump super smt sl-10

CTN :44453680

27 Mar, 2026 NA

Bahraich - Uttar Pradesh

Tender For supply of procurement of cutting tools

Central Government And Public Sector

CTN :43800106

17 Mar, 2026 NA

Kalpakkam - Tamil Nadu

Tender For corrigendum : supply of puller pusher cutting and associated tools for pressure tube cutting and removal d d -item -1 - pressure tube cutting toolas per attached drawing and specification as per attached annexure. , item - 2 - spare cutter for pressure tube cutting tool assembly as per attached drawing and specification as per attached annexure. , item -3 - pressure tube pusher tool as per attached drawing and specification as per attached annexure. , item -4 - spare rubber bunk for pressure tube pusher tool as per attached drawing and specification as per attached annexure. , item -5 - pressure tube puller tool assembly - long tool - as per attached drawing and specification as per attached annexure , item -6 - pressure tube puller tool assembly - short tool - as per attached drawing and specification as per attached annexure , item -7 - spare cutter wheel housing with pin for pressure tube cutting tool assembly as per attached drawing and specification as per attached annexure. , item - 8 - pin of cutters for pressure tube cutting tool as per attached drawing and specification as per attached annexure.

CTN :44432364

19 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron steel cut up parts of condemned diesel loco no. 36109/ wds6r/hwh/er, i.e chassis with driver cab and radiator room - 01 no, air brake & feed pipe- 04 nos, truck frame finished casting with fitting- 02 nos, cattle guard- 02 nos., buffer -04 nos, main reservoir-02 nos., engine block with sump & crank shaft assembly - 01 no, rtmb-01 no, split gear and left side, right side cam gear -01 set, rectifier panel -01 no, traction alternator complete -01 no, traction motor complete-06 nos, auxilary generator- 01 no, exciter generator-01 no, lube oil filter tank assly-01 no, loco starting battery-08 nos. condition:-[1]as is where is basis [2]cutting is allowed for loading facilities only. [3] cutting time of sold loco of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [4] wheel sets with susp. tube -6 sets, axle box- 6 pairs & bull gear- 06 nos are excluded from sale.

Cutting Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government And Public Sector