Latest cylinder key Tenders | Government cylinder key Tenders

corporations/Associations/Others

CTN :37267772

21 Dec, 2024 NA

Bokaro - Jharkhand

Tender For corrigendum : supply of non sparking adjustable wrench (v2) (q2) , non sparking cylinder key-is:4595 (q3)

State Government

CTN :38558163

18 Dec, 2024 NA

Multi City - Telangana

Tender For supply of hardware materials for slnsd ygt

Central Government/Public Sector

CTN :38041097

21 Dec, 2024 NA

West Tripura - Tripura

Tender For corrigendum : custom bid for services - repair and maintenance of ac modules dc modules and various pcbs of all departmental drilling rigs of ongc tripura asset-work includes but not limited to supply of men, materials, testing equipment / tools etc for fault finding (trouble shooting), repairing, calibration and functional testing of ac modules, dc modules and various pcbs in e1400 series drilling rigs of tripura asset. broad details of the activities to be carried out are as below: a. following jobs are to be carried out in pcbs i. physical checking of healthiness of components & cleaning of the pcbs. ii. checking of voltages at different points in the pcbs after powered up through simulator. iii. replacement of faulty components, limited to 50% cost of the pcb, to make it operational. iv. calibration of pcbs v. on load testing of 12 hrs. continuous loading for satisfactory operational vi. fixing of pcbs in the respective panels b. following jobs are to be carried out in ac module i. visual inspection of module for any loose hardware & cleaning of the module. ii. checking of circuit by using simulator. iii. checking of over frequency tripping. iv. checking of under frequency level. v. under frequency voltage cut back test vi. idle-run ramp and idle trip test vii. throttle regulation check viii. master slave and command circuits check ix. current demodulator check x. automatic voltage regulator check xi. meter circuit check xii. over voltage trip check xiii. reverse power trip check xiv. frequency demodulator check xv. module panel meter check xvi. replacement of faulty components, limited to 50% cost of the ac module, to make it operational. xvii. on load testing of 12 hrs. continuous loading for satisfactory operational xviii. fixing of ac modules in the generator panel c. following jobs are to be carried out in dc-module i. visual inspection of module for any loose hardware & cleaning of the module. ii. dead band and current limit calibrations iii. zero throttle interlock circuit test iv. firing circuit test v. speed feedback circuit test vi. power limit circuit test vii. slave circuit test viii. manual voltage circuit test ix. over current trip calibration test x. meter circuit check xi. replacement of faulty components, limited to 50% cost of the dc module, to make it operational. xii. on load testing of 12 hrs. continuous loading for satisfactory operational xiii. fixing of dc modules in the dcpcr panel d. following jobs are to be carried out in battery charger i. visual inspection and cleaning of components such as transformer, voltmeter, ammeter, pcbs, rectifier, indication lamps and tightening of loose hardware, if any. ii. checking of tripping logics, dc under voltage, dc over voltage, reverse polarity, ac mains fail, over current, over temperature etc. iii. replacement of faulty components, limited to 50% cost of the battery charger, to make it operational.-msme exemption - no | startup exemption - no

CTN :38507586

28 Dec, 2024 21.95 Lacs

Okha - Gujarat

Tender For supply of epoxy golden yellow paint , epoxy black paint , epoxy white paint , synthetic white enamel , epoxy green paint , epoxy red paint , primer , general purpose thinner , epoxy thinner , black bituminous , antifouling red , welding rod 3.15 mm , welding rod 4.00 mm , gas cutting nozzle , flash back arrester , flash back arrester to fitted on cylinder oxygen and acetylene , cylinder key , gas lighter , nozzle cleaner , welding glass plain , welding glass black , lighter stone , hack saw blade , petroleum jelly , lug 2.5 sq mm ring type , lug 2.5 sq mm fork type , lug 4-6 sq mm ring type , lug 4-6 sq mm fork type , 2 core cable 2.5 sq mm , assorted size sleeve , ss nut bolt 6mm , m.s angle 50x50x6 mm , m.s angle 75x75x10 mm , m.s. plate 6 mm , ss nut and bolts and washer , s s nut and bolts and washer , s s nutandbolts and washer , s.s nut and bolts and washer , ms nut and bolts , high carbon steel stud , wooden planks , lead , sealant , cocking gun , insulation tape , cutting torch , rustoline or glass cleaner , safety goggles , welding holder , locking clip , reinforced flexible pipe , hose pipe blue and red , double stage 2 gauge regulator for oxygen , double stage 2 gauge regulator for acetyline , safety gauge for regulator , cable tie cv 100 , cable tie cv 150 , cable tie cv 200 , cable tie cv 300 , hss dril set , cutting wheel , chalk stick , plier , glass cleaner 500ml , maker pen , wire striper , side cutter , yellow duster , welding helmet

State Government

CTN :38394408

23 Dec, 2024 NA

Multi City - Madhya Pradesh

Tender For nit for splicing of opgw of different size viz. 8/12/24/48 fibre opgw strung on 400/220/132kv transmission line towers located in different parts of mp, termination and end to end otdr testing of the opgw link before and after splicing as per requirement. for carrying out these works all required t&ps, manpower, testing and measuring equipments, transportation of t&p, materials, manpower, fibresleeves, etc shall be arranged by the contractor at his/her cost. material like junction box, opgw cable and opgw hardware/ fitting shall be provided by the mpptcl. the splicing of opgw and otdr testing shall be carried out under live (charged) condition of 400/220/132kv transmission lines.

CTN :38315822

18 Dec, 2024 1.35 Crore

Thiruvananthapuram - Kerala

Tender For purchase of tool and equipment in electrician trade in various itis under scdd - tool and equipment in electrician trade, contactor & auxillary contacts 3 phase, 415 volt, 25 amp with 2 no and 2 nc, contactor & auxillary contacts 3 phase, 415 volt, 32 amp with 2 no and 2 nc, limit switch - limit switch, liver operated 2a 500v, 2 contacts, rotary switch 16a/440v, relay- a.cut out relay 16a,440v, relay- b.reverse current 16a, 440v, relay- c. over current 16a,440 v, relay- d.under voltage 360v-440v, insulators including hardware fittings - pin type, insulators including hardware fittings - shackle type, insulators including hardware fittings - egg type, insulators including hardware fittings -suspension type, hydrometer, load bank ( lamp/ heater type) 6kw, 3ph, brake test arrangement with two spring balance rating 0 to 25 kg, laboratory type induction coil 1000 w, thermometer -digital 0-150 c, series test lamp 230v, 60w, knife switch dpdt fitted with fuse terminals 16 amp, knife switch tpdt fitted with fuse terminals 16 amp/ 440 v, miniature circuit breaker 16 amp, earth plate - 60cm 60cm 3.15mm copper plate,, earth plate - 60cm 60cm 6mm gi plate, earth electrode- primary electrode 2100 28 3.25mm, secondary cu strip 20 5mm, mccb - 100 amps, triple pole, elcb-25amps, double pole and 25amps, double pole, l n 30 ma, rccb-25amps, double pole and 25amps, double pole, l n 30 ma, fuses - hrc, fuses - glass, fuses - rewire type, rheostat (sliding type) - 0-25 ohm, 2a, rheostat (sliding type) - 0-300 ohm, 2a, rheostat (sliding type) - 0-1 ohm, 10 a, rheostat (sliding type) - 0-10 ohm, 5 a, capacitors - electrolytic, capacitors - ceramic, capacitors - polyester film, capacitors - variable, capacitors -dual run, various electronic components, various lamps - halogen, various lamps - incandescent lamp, various lamps - fluorescent tube, various lamps - hp mercury vapor lamp, various lamps - high pressure sodium lamp, various lamps - low pressure sodium lamp, various lamps - led, plug socket 230v, 5a, piano switch 230v, 5a, lamp holder 230v, 5a, cables:twisted pair, non -metallic sheathed cable, underground feeder cable, ribbon cable, metallic sheathed cable, multi-conductor cable, coaxial cable, direct-buried cable, bus bar with brackets (1 mtr each), rcc pole with accessories (ms angle iron, c-clamp, stay insulator etc.) and materials 6 mtr, safety belt standard quality, ohm meter;series type, 50/2000 ohm analog, ohm meter;shunt type 50/2000 ohm, digital multimeter, a.c voltmeter m.i analog, portable box type housed in bakelite case, milli voltmeter centre zero analog, portable box type housed in bakelite case (100-0-100 mv), ammeter mc analog, portable box type housed in bakelite case - 0- 500 ma, ammeter mc analog, portable box type housed in bakelite case - 0- 5a, ammeter mc analog, portable box type housed in bakelite case - 0- 25a, ac ammeter mi analog, portable box type housed in bakelite case - 0-1a, ac ammeter mi analog, portable box type housed in bakelite case - 0-5a, ac ammeter mi analog, portable box type housed in bakelite case - 0-25a, kilo wattmeter analog, digital wattmeter 230v, 1kw, 50hz, a.c. energy meter-single phase, 10a, 240v induction type, a.c. energy meter-three phase, 15a, 440v induction type, power factor meter digital 440v, 20a, three phase portable box type, frequency meter 45 to 55 hz, magnetic flux meter 0-500 tesla, lux meter- lux meter lcd read out 0.05 t0 7000 lumens with battery, tachometer -analog type-10000 rpm, tachometer -digital photo sensor type-10000 rpm, tong tester/clamp meter 0-100a (digital type), megger -analog -500v, 3- point d.c. starter for 2.5 kw dc motor, 4- point d.c. starter for 2.5 kw dc motor, wheat stone bridge with galvanometer and battery, single phase variable auto transformer 0-270v, 10 amp(air cooled), phase sequencer indicator 3 phase 415v, growler, ac starters: - for a.c motors of 2 to 5 h.p. - a. resistance type starter, ac starters: - for a.c motors of 2 to 5 h.p. dire

CTN :38264700

26 Dec, 2024 28.64 Crore

Rajsamand - Rajasthan

Tender For construction of 220kv and 132kv transmission lines associated with 220kv gss deogarh distt rajsamand including survey, supply of all equipments/ materials, erection (including civil works), testing and commissioning turnkey project - tower: fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, d-shackles, bird guard, u-bolt, pack washer, anticlimbing devices etc., high tensile steel, mild steel, supply of bolts & nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, spring washers etc. ), supply of earthing material of towers, pipe type set, counter poise earthing set, supply of following tower accessories, danger plate, number plate, phase plate (set of three), design, manufacture and supply of following line material. **, 70 kn disc insulators, 120 kn disc insulators, hardware fittings for acsr zebra conductor, single suspension h/w fittings for acsr zebra conductor, single tension h/w fittings for acsr zebra conductor, double suspension h/w fittings for acsr zebra conductor, double tension h/w fittings for acsr zebra conductor, accessories for acsr zebra conductor, mid span compression joint for acsr zebra conductor, repair sleeve for acsr zebra conductor, preformed armour rod for acsr zebra conductor, vibration damper for acsr zebra conductor, earth wire, g.i. earth wire 7/3.15 mm, strain assembly for earth wire 7/3.15mm with copper earth bond, suspension assembly for earth wire 7/3.15mm, vibration damper for earth wire 7/3.15mm, mid span compression joint for earth wire 7/3.15mm, repair sleeve for earth wire 7/3.15mm, any other item required for successful completion of work

Cylinder Key Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government