Latest cylindrical shank Tenders | Government cylindrical shank Tenders

Central Government/Public Sector

CTN :45064002

23 May, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of ring spanners set , allen keys long ball point set (1.5 to 10 mm) , allen keys long ball point set (1/16 to 3/8 inches) , hand oil pump , grease gun (lever type) , bucket grease pump with trolley , hydraulic bottle jack 2 ton , hydraulic bottle jack 3 ton , hydraulic bottle jack 5 ton , hydraulic bottle jack 10 ton , bench vice with fixed base , needle files set 140 mm , needle files set 160 mm , drill driver , billet level /spirit level , torpedo level/ spirit level , combination spanner set , shallow offset ring spanner set crv , adjustable wrench 8" , adjustable wrench 12" , long nose plier 6" , long nose plier 8" , plier circlip external (bent) , plier circlip internal (bent) , plier circlip straight external , plier circlip straight internal , curved lock plier mat handle , straight jaw locking plier , slotted screw driver , pipe wrench , hacksaw frame with blade , sledge hammer with wood handle , bearing pullers , line testers , small angle grinder(4 inch) , blower , heavy duty heat gun , welding helmet , mixed tools set , 3 in 1 mobile tools storage box , handheld torch light , polyster webbing sling lifting belt for crane hoist material handling. , combination spanner set (inches) , torque wrench ( 5 to 25 n-m) , torque wrench ( 10 to 50 n-m) , impact drill machine , pipe wrench 450 mm-18" , 1/4 inch sq. drive socket set 6 pt met , oxygen acetylene torch kit (used 13 1 for welding, brazing and cutting) , 1/2 drive pear head ratchet set metric , double open end spanner set

Central Government/Public Sector

CTN :45034292

11 May, 2026 NA

Koradi - Maharashtra

Tender For supply of single girder eot hot misc crane - 8t - compressor house - indoor- non hazardous area , single girder eot hot misc crane - 8t - dg room -indoor - non hazardous area , single girder eot hot misc crane - 5t - acw pump house - indoor - non hazardous area , single girder eot hot misc crane - 5t - outside cw pump house - screens and gates handling -outdoor - non hazardous area , single girder eot hot misc cranes - 2t - fuel oil pump house - indoor - hazardous area , maintenance tools and tackles , supervision of e and c - prices for visits , supervision of e and c - number of days , mandatory spares

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

Central Government/Public Sector

CTN :44932308

30 Apr, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of solid carbide drill dia. 5mm cylindrical shank,solid carbide drill dia. 6mm, cylindrical shank,solid carbide end mill dia. 4mm, cylindrical shank,solid carbide end mill dia. 5mm cylindrical shank,

CTN :44969809

13 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of 25mm cylindrical shank solid carbide square shoulder end mill cutter for slot milling, side milling.

CTN :43162544

21 Apr, 2026 NA

Jabalpur - Madhya Pradesh

Tender For bid to ras supply of 20 mm cylindrical shank solid carbide square shoulder end mill cutter for slot milling, side milling

State Government

CTN :43964196

11 May, 2026 NA

Tapi - Gujarat

Tender For corrigendum : supply of various types of consumable items and miscellaneous items for day to day maintenance works for emd-6 utps. (emd-6 et-6203) - carbon cleaner spray, puff seal have polyurethene based foam sealing compound, stanvac pen oil rust remover 6030,500 ml/pac, 6084 red insulating varnish (500 ml) can, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., 415v offline contact cleaner (700ml tin), z955 (sl) srippex sltape roll (silicon rubber, self amalgamating, high temperature resistance tape size:-25mmw0.50mmw15mtr./roll, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, self expanding cfc free one component polyurethane foam sealant. product2206 360 puf 3x in 700 ml spray can., w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, temperature measurement laser gun., araldite 180 gram/tube, z 801 fast steel epoxy stick (1 stick 114 grm), emery cloth roll 50mm w x 50 mtr grit 220 extra fine, cable tie 100 mm, cable tie 150 mm, cable tie 200 mm, impact wrench power/battery operated, taparia make utility knife. product no. uk-3., cordless screw driver power/battery operated, tools bag (taad patri type, thick cloth) with 3 to 4 pockets for artisian tools having size 16" x 4" x 10"approximate, weighing scale digital, crc-226 contact cleaner in 415 ml/300 gram spray bottle., wd -40 industrial 420 ml wd 40 spray bottle for rust removing purpose, hss ground thread hand tap set m 10x1, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 ,size; 12mm, molykote 1000 spray can (400ml/270gms/can), electrically operated angle grinder, size: 100 mm, model no:gws 6-100 g,p no: f002 g30 050, make: bosch, digital multimeter 4.1/2 digit (true rms), loctite 242 thred locking 250 ml/tube, 2 tb external usb powered hard disk, pebble ral 7032 color spray bottle for electrical ht / lt panel, high voltage detector, rubber hand gloves, long rang rechargeable torch with charger., ag-4 cutting wheel make:bosch, buffing wheel , size: 100 x 16 x 5/6 mm, circlip plier pvc dip coated sleeve , internal (straight nose type ) ,cap 19mm to 60mm, 185mm length, product no.1441-7n, external circlip plier ( straight nose type ) cap 8 mm to 25 mm.product no:1443-5s, hss ground thread hand tap set m 4x0.7, hss ground thread hand tap set m 5x0.8, hss ground thread hand tap set m 6x1, hss ground thread hand tap set m 8x1.25, hss ground thread hand tap set m 10x1.5, hss ground thread hand tap set m 12x1.75, hss ground thread hand tap set m 14x1.5, digital ma clamp on meter

CTN :44899830

06 May, 2026 NA

Hyderabad - Telangana

Tender For supply of fabrication and supply of integration tools e e - t1p-p1-nozzle assembly bolt and nut , t1p-p1-nozzle extraction screw , t1p-p1-nozzle eye bolt , t1p-p1- nozzle guide pins , nozzle handling tackle , t1p-p2- nozzle horizontal handling tackle , t1p-p1and p2 igniter m10x1point25 drive in screw , t1p-p1and p2 igniter m12x1point25 extraction screw , t1p-p1and p2 igniter m10x1point25 plain guide pin , t1p-p2 nozzle eye bolts m16x2 , t1p-p2 nozzle drive in screw with nut m12x1point25 , t1p-p2 nozzle guide pins m12x1point25 , t1p-p2 nozzle extraction screw m16x2 , m24x2 guide pins for t3s1 nozzle assembly , m27x3 extraction screw for t3s1 nozzle dis assembly , m24x2 driving screw with nut for t3s1 nozzle assembly , t3s1 igniter m10x1point25 drive in screw , t3s1 igniter m10 plain guide pin , m12x1point25 extraction screw for t3s1 igniter dis assembly , t3s2 nozzle m16x1point5 drive in screw with nut , t3s2 nozzle m18x2 extraction screw , t3s2 nozzle m16x1point5 guide pins , t3s2 igniter- m14 extraction screw , t3s2 igniter m10 drive in screw , t3s2 igniter m10 plain guide pin , m14x2point0 extraction screw , m14x1point5 extraction screw , m14x1point25 extraction screw , m12x1point5 extraction screw , m12x1point75 extraction screw , m12x1point25 extraction screw , m12x1point0 extraction screw , m10x1point5 extraction screw , m10x1point25 extraction screw , m10x1point0 extraction screw

CTN :44891328

30 Apr, 2026 NA

Udyogamandal - Kerala

Tender For miscellaneous works in thermal-2 - miscellaneous works in thermal-2, the work shall be carried out on a manday basis and includes collection, segregation, and shifting of metallic and non-metallic waste materials from the thermal-2 building premises. the activities cover handling of rusted metallic items, structural scrap, insulation materials, oil sludge/oil slick, mud, debris, and other miscellaneous scrap lying at various locations such as the ground floor near boiler area, pipe rack area, tg floor area, cooling tower area, and other surrounding premises. the work also includes bringing down waste materials from different floors of boiler units 1, 2, and 3 to ground level and consolidating them at a designated location. all manpower, tools, tackles, and equipment shall be provided by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be executed on a manday basis and includes loading and unloading of segregated metallic and non-metallic scrap/waste materials within the fact ud / petro plant premises as directed by the engineer-in-charge. all required manpower, tools, tackles, and handling equipment including concrete lump breakers shall be arranged by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., transportation of scrap and waste materials loaded under sl. no. 2 from cpp - pd premises to the designated scrap yard, waste dumping area, or any other location within the fact ud / petro plant premises, as directed by the engineer-in-charge. the contractor shall provide a suitable truck having carrying capacity up to 2 tonnes for the purpose.the rate per trip shall be inclusive of all charges such as vehicle hire, driver wages, fuel, and any other incidental expenses.copies of the relevant scrap dispatch advice and weighbridge report shall be submitted by the contractor for each lot of material transported. the quantity indicated is tentative and payment shall be made based on actual number of trips certified by the engineer-in-charge., the work shall be performed on a manday basis and includes moving and rearranging used materials and equipment parts such as valves, pumps, flanges, motors, radiators, drums, welding sets, structural items, roof sheets, and other related materials stacked at various locations including cpp building north and south entrance areas, boiler feed pump area, tg floor area, and other specified locations, as instructed by the engineer-in-charge. required cleaning materials, rigging materials, tools, tackles, and manpower shall be arranged by the contractor. the eot crane at the tg floor may be used free of cost, subject to availability. loading and unloading for shifting within the petro plant premises shall be in the contractor s scope. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be carried out on a manday basis and includes removal of vegetation from the outer side walls and top platforms of cooling tower cells, removal of vegetation from the side walls and floor of the cooling tower pond, and removal of accumulated mud, slurry, and other unwanted materials within the cpp cooling tower area. all manpower, tools, tackles, and equipment required for execution shall be arranged by the contractor. cleaning of all four cooling tower cells shall be treated as a single activity., the work shall be executed on a manday basis and includes thorough cleaning of the furnace oil (fo) pump house area. furnace oil spillage on floors, including areas beneath oil heaters, around pumps, condensate drains, and adjoining areas, shall be removed by spreading sawdust and collecting the oil-soaked sawdust for proper disposal as instructed by the engineer-in-charge. sawdust, cotton waste, manpower, tools, and all other materials required for complete execution of the work shall be arranged by the contractor. payment shall