Latest d buckle Tenders | Government d buckle Tenders

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

Central Government/Public Sector

CTN :40004123

03 May, 2025 56.33 Lacs

Jhansi - Uttar Pradesh

Tender For providing of custom bid for services - out sourcing of housekeeping and cleaning of officers rest house for two years (part-a) all ns item,custom bid for services - out sourcing of housekeeping and cleaning of officers rest house for two years (part-b) horticulture and landscaping dsr-2020 ms itemsall dsr item

Co-operative

CTN :40002785

17 Apr, 2025 3.58 Lacs

Jaipur - Rajasthan

Tender For kheruwala gram sewa sahari samiti limited sadulsahar godown construction item goods-profile sheet 0.8 mm th (with zinc coating not less than 275 sqm/sqm3700 sqft or 343.86 sqm2-coating not less than 275 sqm/sqm360 sqft or33.45 sqm3-3 dia round ms pipe (isi marked)485 rt or147.87 rm(wight 5.83 kg/m)4-1.25 dia round ms pipe (isi marked)120 rt or36.58 rm(wight 2.0 kg/m)5-1.5 x 3 rectanglar ms pipe (isi marked)

CTN :40013411

05 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of flame proof guards,flame proof fuses,flame proof air circulator device,flame proof lights and chocks,anti corrosion treatment,cable trays,anticorrosion light,plug socket,flame proof junction box,galvanized iron sheets and wind ties,pvc rain water pipes,5 core wire for ress,nobs,plugs,sockets,stickers,safety turn buckle,cap,casing

CTN :39939011

01 May, 2025 46.75 Lacs

Rohtak - Haryana

Tender For rate contract for two years (extendable for another one year or till fresh r/c is finanlized whichever is earlier) for the purchase of raw material orthopaedics workshop - - pvc granules 0.40 (led) (bag of 25 kg.) , synthetic fevicol rubber adhesive s.r.998 (tin of 5 ltr.) , rubber sheet nir (3'x4') , rexene (superior) , aluminum sheet 20 gauge (4'x8') , p.o.p. powder (25 kg. bag) , (j.k lakshmi, j.k super lakshmi, aggarwal gypsum plaster) , hexa blade (10 blade per pkt.) , plastic karhi 1" pkt. of 100 pieces , plastic karhi 1" pkt, of 100 pieces , plastic karhi 2" pkt. of 100 pieces , t.p. thinner (pack of 5 ltr. murga brand) , thinner , velcro 1" (m+f) roll of 25 mtr. psi 7.5-8.0 life cycle 250-350 , velcro 1" (m+f) roll of 25 mtr. psi 7.5-8.0 life cycle 250-350 velcro 2" (m+f) roll of 25 mtr. psi 7.5-8.0 life cycle 250-350 , nylon thread black for sewing machine (1500 mtr. per reel) , elastic 1" roll of 25 mtr. , elastic 2" roll of 25 mtr. , jigshaw blade (5 blade per pkt.) , machine oil , bifurcate rivet " round head (pkt. of 500 pcs.) , bifurcate rivet 1" round head (pkt. of 500 pcs.) , w-buckle " (iron) (1 kg. per pkt.) , d buckle " (iron) (1 kg. per pkt.) , d buckle 1" (iron) (1 kg. per pkt.) , niwar nylon 1" (roll of 1kg) , niwar nylon 1" (roll of 1.5 kg.) , niwar nylon 2" (roll of 2 kg) , raising sheet %" (1mtr. x 2 mtr.) , raising sheet 1" (1mtr. x 2 mtr.) , raising sheet 1.5" (1mtr. x 2 mtr.) , t.p. sheet 2.2 mm , cotton stockinet 2" , cotton stockinet 3' , cotton stockinet 4" , cotton stockinet 5" , cotton stockinet 6" , sole leather (med.) madrasi , calf leather (black superior) , chrome leather (black superior) , smash leather (swede) , goat skin superior , poly propylene sheet 1 mm 3'x6' , poly propylene sheet 1.5 mm 3'x6' , plastnova sheet 3 mm 3'x6' (ortho pc) , plastnova sheet 4 mm 3'x6' (ortho pc) , plastnova sheet 5 mm 3'x6' (ortho pc) , sponge sheet " 4"x8", knee joise forged small size , knee joint forged med. size , knee joint forged large size , pigment pao c??????? , pvc fit 0.5 micron , polyester resin (10 kg. por can) , accelerator for polyester resin , catalyst for polyester resin , fiber glass for polyester vasin (10 kg. per roll) , below elbow kit left/righer (alimco) , ranger foot 20 cm (rt & lt) with 5.5. nut & bolt (90x10mm with ln head) , ranger foot 22 cm (kt & lt) with 5.5. nut & bolt (90x10mm with ln head) , ranger fon 23 cm (rt & lt) with 55. nut & bolt (90x10mm with ln head) , ranger foot 24 cm (rt & lt) with 5.5. nat & bolt (90x10mm with ln head) , ranger foot 25 cm (rt & lt) with s.s. nut & boit (90x11man with ln head) , ranger foot 26 cm (rt & lt) with s.s. nut & bolt (90x10mm with lm head , ranger foot 27 cm (rt & lt) with ss. nut & bolt (90x10mm with ln head) , ranger fout 28 cm (rt & lt) with 5.5. nut & bolt (90x10mm with ln head) , cloth (khadi cotton) colored , camvas cleth , two way highly stretchable synthetic cloth for stockinga , four way highly stretchable synthetic eloth for stockings , shoe cloth , press dutton whine 12mm (plz. of 1000 pa , bolt with nut 5/32"x1" (flat head) , bolt with nut 1/32x3/4" (head) , bolt with nut /16"x1/2" , bolt with nut 10x6 , bolt with nut 3/16 x , bolt with nut 5/32" x 1.5" (5.5) , bolt with net 4"x1" (half round head) wooden screw full thread star head 14" (250 pcs. per plat) , wooden screw full therad star head 1" (250 pcs per pkt.) , wooden screw full thread star head 1/4" (250 pos. per pet) , iron washer 4 mm hole, 12 dianeer , iron washer w" hole 1 diameter (heavy) , copper rivet 1/8"x1/2" , copper rivet 5/321/2" , copper rivet 1/16"x1/2" , copper rivet 1/3/4" , copper rivet 3/32"x3/4" , capper rivet 3/16"x3/4" , it rivet 5/32" 3/4" (flat hend) , iron rivet 3/32" x 1/4" 10 no. (plat head pkt of 2.5 kg) , ron strip 1/16 soff , fron strip 1/8"x1" , strip 1/16"x1" , irus strip 5/32% n , iron strip 1/8 , iron strip 1/16x 1" , nail 13 mm , nail mm , iron keel 1" , sole polish blac

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

CTN :39986754

19 Apr, 2025 NA

Tiruvallur - Tamil Nadu

Tender For tender for supply of icp ms system - uv vis spectrophotometer as per item no 10 of list of items , as per item no 20 of list of items refer annexure 1 to list of items , as per item no 20 of list of items refer annexure 1 to list of items , as per item no 20 of list of items refer annexure 1 to list of items , as per item no 20 of list of items refer annexure 1 to list of items , as per item no 20 of list of items refer annexure 1 to list of items

CTN :39986086

02 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of sulphur analyzers for ms block fccnht - please refer buyer specific additional terms and condition document for detailed item line description , please refer buyer specific additional terms and condition document for detailed item line description , please refer buyer specific additional terms and condition document for detailed item line description , please refer buyer specific additional terms and condition document for detailed item line description , please refer buyer specific additional terms and condition document for detailed item line description , please refer buyer specific additional terms and condition document for detailed item line description , please refer buyer specific additional terms and condition document for detailed item line description

Central Government And Public Sector

CTN :39978436

01 May, 2025 34.81 Lacs

Kaiga - Karnataka

Tender For supply, fabrication, welding/joining, erection and testing of hdpe piping from kgs 3 and 4 to kaiga 5 and 6 area. - supply items (schedule-a), 100 nb equal tee sch 40 astm a 234 gr. wpb sml bw ansi b 16.9, 1oo nb sorf flange 150 # astm a 105 ansi b 16.5, 100 nb blind flange 150 # astm a 105 ansi b .16.5, 100 nb gate valve manual op. flange end 125/150 # sa 216 gr. wcb ansi b 16.34, 100 nb ball valve manual op. flange end 125 /150# hdpe, suit to 100 nb,sa 105, 150 # ansi b 16..5 back ring flange, flange end mechanical type flow totalizer 150# (range 150000 to 200000 cu. mtr.capacity) to suit to 100 nb sa 105 flange 150 #, ansi b 16.5. flow meter totaliser specification, dn-110 hdpe pipe is 4984 gr. pe 80 pn 6, dn-110 hdpe 90 degree elbow, is 4984 gr. pe 80 pn 6 as per is 8008, dn-110 pipe /stub end, 1s 4984 gr pe 80 pn 6 as per is 8008., 100 nb cs back ring flange astm a 105 as per ansi b 16.5 150#, dn-110 hdpe equal tee, is 4984 gr.pe 80 pn 6, as per is 8008, dn-50 hdpe cap, is 4984 gr. pe 80 pn 6, as per is 8008., hexagonal headed bolt, nut with washer 85 mm long is 1363 gr. 6.3 /is 3757 gr. 8.8, ismc 100 is 2062 , e 250 gr. a, 12 mm thick plate is 2062 , e 250 gr. br, 110 nb ms u clamp 25 mm wide x 3.5 mm thick, 100 nb m 12 u bolt is 2062 e 250 gr. a, m 10 x 100 hst/faz, 1.6 mm thk caf gasket 100 nb is 2712 gr. w/3, erection item (schedule-b), butt fusion welding / joining and laying of dn- 110 hdpe pipe, is 4984, grade pe 80, pn 6 both under ground and above ground., butt fusion welding / joining and erection of dn-110 90 degree elbow, hdpe, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of both end), butt fusion welding / joining and erection of dn-110 hdpe equal tee, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of three end), butt fusion welding / joining and erection of dn-110 hdpe pipe end /stub end is 4984, grade pe 80. pn 6, butt fusion welding/joining and erection of dn-50 hdpe cap is 4984 grade pe-80 pn-6, installation of 100 nb hdpe ball valve without welding., fabrication , erection , welding, inspection,surface cleaning & supply and application of hb chlorinated rubber zinc phospate primer paint in two coats to minimum 100 micron dft and supply and application of hb chlorinated rubber finish paint in two coats to 60 micron dft for cs structural steel support and components., installation of anchores m10 x 100 mm hst/faz including handling,scafolding,labour & tools., removing & reinstallation of precast concrete slab 0.3 m (l) x 1.350 m (w) x 0.1 m (t), excavation and backfilling of excavated trenches with the soil after completion of installation of pipe lines and testing including levelling/grading, compaction to the required level 1.5 m (d)x 0.8 m (w), sand bedding 50 mm depth x 400 mm width for underground hdpe piping including supply of sand., dismantling of existing dn-50 hdpe piping including breaking of existing cement concrete ( 0.7 cub.mtr) & pcc to be done after breaking and removing of existing cement concrete, including tools, labour & disposing of unservicable material as directed by eic, carefully removing the korean grass along with soil of 100 mm to 250 mm depth and 1500 mm width including replacing the same removed korean grass along with soil after laying hdpe line along with tools & tackles,watering of grass,dressing of area etc.in all complete as per direction of eic

Corporations And Associations And Others

CTN :39983908

16 Apr, 2025 1.58 Lacs

Bahadurgarh - Haryana

Tender For work for supply and installation of playing and open gym equipment in 2 nos. parks at near h. no.273 sector-10 bahadurgarh and all other works contingent thereto with one year defect liability period free of cost - app. item leg press + surf boardmain round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item providing and fixing chain swing of size 10 long x 9 high (above ground) frame is made of m.s. pipe 2" b class which stay with m.s. pipe 1" b class frame is connected with m.s. road 25 mm dia shaft having fabricated ball bearing no. 3204 shaft, further having 2 no. seating belt type seat welded with 8mm thick m.s. complete with painting and fixed in cement concrete block of size 12" x 12" x 15" into 4 legs in mixing of ratio 1:2:4. complete in all respect of entire satisfaction of engineer-in-charge., app. item providing and fixing of slide 12 long x 16" wide x 5 high (above ground) slide is made of s.s. sheet 18 swg mounted on m.s. angle 40 x 40 x 4 mm slide 2 no vertical support of m.s. pipe 1" b class ladder having climbing steps of pipe 1/2 "b class complete with painting and to be fixed in cc blocks 12" x12" x15" in to 4 legs of mix in ratio 1:2:4.., app. item providing and fixing of setter sea -saw frame made of 2" dia ms pipe, 5" long and 1-6 height of ground level with 4 nos of sea-saw plunks with 1 " ms pipe, 8 long sheet made with 16 gauge painted with 1st quality paint and fixing with concrete block 1:2:4 ratio., app. item supply and installation of garden bench chair type garden bench with l-shaped sides made of reinforced concrete (m30), thickness 100 mm, overall height 1000 mm, base width 620 mm. back and seat shall consist of 5 nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. seating height of the bench shall be 450 mm. the bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. all materials required to be as per bis specifications.

D Buckle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Co-operative

Central Government And Public Sector

Corporations And Associations And Others