Latest dampener Tenders | Government dampener Tenders

CTN :39657632

22 Apr, 2025 6.20 Crore

Kolkata - West Bengal

Tender For corrigendum : carrying out various instrumentation works for part a as per standard specification by providing all required materials in connection with the composite works for setting up of hpg-2, butene-1 and psa units at lepetkata, assam of m/s bcpl-instrumentation"pressure gauges and accessories (excl. supply of impulse pipe / tubing materials)"installation of line mounted or remote mounted or local gauge board mounted pressure gauge/ pressure gauge with pulsation dampener / syphon / over-range protector (direct / surface mounted / diaphragm seal type) inclusive of mounting of instrument, supply and erection of supports / tray, mounting on support (if support required), laying of capillary on tray, fabrication and installation of manifolds / impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of supply of instrument, gauge board, yoke, piping material and calibration.in stainless steel as per standard 7-52-0432/1112in carbon steel as per standard 7-52-0432/1112in carbon steel as per standard 7-52-1222in carbon steel as per standard 7-52-1210in carbon steel as per standard 7-52-0433/1113in carbon steel as per standard 7-52-1120in carbon steel as per standard 7-52-0459/1158"pressure instruments (excl. supply impulse pipe / tubing materials)"installation of pressure transmitters/ pressure switches (with or without pulsation dampener, over-range protector)/ diaphragm seal type pressure transmitters/ diaphragm seal type pressure switches including mounting on yoke/ surface, supply of supports for capillary, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of supply of instrument, piping/tubing materials, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard 7-52-0437/0438/1131/1132in carbon steel as per standard 7-52-1222in carbon steel as per standard 7-52-1223in carbon steel as per standard 7-52-2103in stainless steel as per standard 7-52-1223in carbon steel as per standard 7-52-1143in stainless steel as per standard 7-52-1143"differential pressure instruments (excl. supply of impulse pipe/tubing materials)"installation of differential pressure transmitters (including one side capillary type)/ differential pressure switch(including one side capillary type)/ diaphragm seal type dp transmitters/ diaphragm seal type dp switch including mounting on yoke/ surface, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, supply and fabricating of supports for capillary, laying of capillary on supports, painting, installation of flushing connection, hydraulic testing of impulse lines as per standard indicated below but exclusive of supply of instrument, piping material, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard 7-52-0452/1171in carbon steel as per standard b348-7-52-4062in stainless steel as per standard b348-7-52-4062in carbon steel as per standard b348-7-52-4063"differential pressure (flow) transmitters (excl. supply of impulse pipe/tubing material)"installation of differential pressure(with or without integral manifold)/ diaphragm seal type differential pressure flow instruments including mounting on yoke, supply of supports for impulse lines/ manifolds/ capillary, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of supply of instruments, piping material, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard b348-7-52-3339in carbon steel as per standard 7-52-1305in stainless

CTN :39996720

29 Apr, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of electrical material for year, 2025-26 - bakelite pendent holder (p.t.), s.t. holder 100 w 230 volt national make., condenser 2.5 mfd oil filled local & i.s.i. make, condenser 4 mfd oil filled local & i.s.i. make, insulating varnish v-155 doctor beck make, insulating varnish thinner v-155 for doctor beck make, insulating varnish lumlft 1-a doctor beck make, insulating varnish bectrol red dr. beck make, insulating varnish bectrol red thinner for dr. beck make, benzeen, corrigan tube dowels make, p.v.c. tape steel grip, white petrol, cotton tape i.s.i., cotton tape 1 i.s.i., empire tape i.s.i., empire tape 1 i.s.i., glass tape i.s.i., glass tape 1 i.s.i., glass varnish tape i.s.i., glass varnish tape 1 i.s.i., c.t.c. bottle 250 ml i.s.i. make, amp. meter 0-200 amp. size 4 x4 flesh type ctr 200/5 a.e. make, amp. meter 0-300 amp. size 4 x4 flesh type ctr 300/5 a.e. make, amp. meter 0-400 amp. size 4 x4 flesh type ctr 400/5 a.e. make, amp. meter 0-500 amp. size 4 x4 flesh type ctr 500/5 a.e. make, amp. meter 0-600 amp. size 4 x4 flesh type ctr 600/5 a.e. make, amp. meter 0-800 amp. size 4 x4 flesh type ctr 800/5 a.e. make, amp. meter 0-800 amp.size 144x144 mm flesh type ctr 800/5 a.e. make, power factor meter size 144x144mm for 1500 kw alternator jyoti make, amp. meter 144x144 mm, 0-3000 amp. ctr = 3000/5 a.e. make, frequency meter size 144x144, for 1500 kw alternator jyoti make., volt meter 0-500 volt, 4 x4 flesh type a.e. make, ctr 200/5, a.e. make, ctr 300/5, a.e. make, ctr 400/5, a.e. make, ctr 500/5, a.e. make, ctr 600/5, a.e. make, ctr 800/5, a.e. make, ctr 3000/5, a.e. make, h.t. tape i.s.i. make, plastic cooling fan for 5 hp motor k.e.c. make, plastic cooling fan for 7.5 hp motor k.e.c. make, plastic cooling fan for 10 hp motor k.e.c. make, plastic cooling fan for 12.5 hp motor k.e.c. make, plastic cooling fan for 15 hp motor k.e.c. make, plastic cooling fan for 20 hp motor k.e.c. make, plastic cooling fan for 25 hp motor k.e.c. make, pvc cooling fan 3 hp, cooling fan for cane un loader motor 30 hp, 960 rpm, crompton make, pvc cooling fan 170 hp, e core for 3ta21 siemens make, e core for 3ta22 siemens make, e core for 3ta24 siemens make, e core for 3ta28 siemens make, hand gloves shock proof 11000 line work, heater plate 8 , pino type switch 5 amp. i.s.i., pino type switch 15 amp. i.s.i., 3 pin top 5 amp. i.s.i., 3 pin top 15 amp. i.s.i., 3 pin socket 5 amp. i.s.i., 3 pin socket 15 amp. i.s.i., plug switch combined 15 amp. i.s.i., heater rod 10 i.s.i., heater rod 12 i.s.i., heater element 1500 watt i.s.i., change over switch 4 pole 63 amp. cane bar make, change over switch 4 pole 100 amp. cane bar make, change over switch 4 pole 200 amp. cane bar make, change over switch 4 pole 400 amp. cane bar make, change over switch 4 pole 630 amp. cane bar make, m.c.c. box 63 amp. 4 pole i.s.i., m.c.c. box 32 amp. 4 pole i.s.i., m.c,b. 25 amp. 2 pole, i.s.i., m.c,b.32 amp. 2 pole, i.s.i., m.c,b. 63 amp. 440 volt 2 pole, i.s.i., m.c,b. 10 amp. 2 pole, i.s.i., porceline kit kat 16 amp., i.s.i., porceline kit kat 32 amp., i.s.i., porceline kit kat 63 amp., i.s.i., porceline kit kat 100 amp., i.s.i., porceline kit kat 125 amp., i.s.i., bakelite kit kat 16 amp., i.s.i., bakelite kit kat 32 amp., i.s.i., bakelite kit kat 63 amp., i.s.i., bakelite kit kat 100 amp., i.s.i., bakelite kit kat 125 amp., i.s.i., digital clamp meter mico make 1000/1200 volt, push button station 1 no +1nc with box, e. core ml-10/12, e.core ml-2/3, phase tester 230 volt taparia make, shunt relay for 400 amp. d.c. 76 mv, glass fuse 0.5 amp.,, glass fuse 5 amp.,, glass fuse 7 amp.,, heavy duty foot switch for sugar bag stitching machine 2no+2nc, power capacitor 25 kvar 440 volt asian make, c.r.c. 26m 415 ml, mushroom push button red & green, element for above 10 amp. 500 v. 1no+1nc, vishnoo make., auxiliary contact, 3ta-24, holder for halogen 500 watt, holder for halogen 1000 watt, volt meter 0-500 volt, 6"x6 flesh type a.e. make, e-core. ml-4, e-c

Central Government/Public Sector

CTN :40029363

07 May, 2025 NA

Hubli - Karnataka

Tender For supply of random orbital sander machine. as per specification: type of speed- variable, rp m- 4500-12000 rpm, size of sanding- 150mm dia for disc sanders, phase-single phase, voltage-2 30v, power of sander in watt-350w, weight without cable-2.1 kgs (approx.). make: bosch, hita chi, rolliwolf, dewalt. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40038312

12 May, 2025 NA

Multi City - Multi State

Tender For supply of jig saw machine with variable speed and blade set for wood & metal cutting with dust blow option make: bosch/black anddecker/dewalt /makita/stanley/hitachi , technical specification: power input:- 780 w; stroke rate at no load:- 500 -3,100 rpm cutting depth inwood/ aluminum /non-alloyed steel:-150/20/10 mm

Corporations/Associations/Others

CTN :39977657

17 Apr, 2025 NA

Kannad - Maharashtra

Tender For supply of material for electrical department - , 5 w led bulb, 9 w led bulb, 18w led bulb, led wall spot light 50 w, incandescent bulb 100 w/200w, gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12 w led lamp, pendant bulb holder, modular angle holder, bulb holder with socket, modular switch board 12, modular switch board 6, modular switch board 4, switch 6a, switch 16a, modular socket 6a, modular socket 16 a, brass point kit-kat 16 a, brass point kit-kat 32 a, brass point kit-kat 63 a, brass point kit-kat 100 amp, main switch 1 ph. 16 amp 240 v. (max) ( distribution board), main switch 1 ph. 32 amp 240 v. (max) ( distribution board), main switch 3 ph. 32 amp 415/500 v. (max) (db), main switch 3 ph. 63 amp 415/500 v. (max) (db), main switch 3 ph. 100 amp 415/500 v. (max) (db), supplying, erecting & marking spmcb 6a to 32a, cseries (for motor/power), supplying, erecting & marking spmcb 40a to 63a cseries (for motor/power), supplying, erecting & marking dpmcb 6a to 32a, cseries (for motor/power), supplying, erecting & marking dpmcb 40a to 63a, cseries (for motor/power), supplying, erecting & marking tpn mcb 6a to 32a, c- series, supplying, erecting & marking tpn mcb 40a to 63a, c- series, mcb box 6 way, mcb box 4 way, mcb box 2 way, power plug complete set, hand dryer machine, copper lugs 25mm, copper lugs 50 mm, aluminum lugs 25mm, aluminum lugs 50 mm, digital multimeter, pole conatcor 45 a, contatcor 75 a, g.i. wire 18 number, dwc 50 mm pipe, 2 way switch, insulated tape (30 tape), electric drill machine, tester, m seal pocket, pvc box 4x4, screw 3/4 inch, screw 1 inch, screw 1.5 inch, screw 2 inch, screw driver set, cutter, pakkad, hammer, extention box 4 way or 6 way pin socket (isi mark), supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230v a.c, regular/ standard model ceiling fan of 600mm., supplying five star rated energy saving ceiling fan 230 v a.c. 50 cycles 1200 mm, supplying and erecting cabin fan of a.c. 230 v. 50 cycles 400 mm. sweep, supplying and erecting fresh air cum exhaust fan of light duty250 v a.c. 50 cycles 225mm. 1400 rpm, supplying evaporative air cooler (desert cooler) with galvanised steel body 230/250 volts, 50 cycles, normal cooling capacity of 60 to 70 cu.m per minute with 15" exhaust fan, minimum 68 litre water capacity tank complete, metal work in crca sheet with fabrication, supplying and erecting isi mark modular type 3 pin 6 / 16a multi socket with safety shutter, capacitor for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep,, supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board, pvc pipe heavy duty 3/4 1, pvc l-bow 3/4 1, pvc t 3/4 1, pvc bend 3/4 1, g.i saddle 3/4 1, pvc junction box one-way 3/4 1, pvc junction box two-way 3/4 1, pvc junction box three-way 3/41, pvc junction box four-way 3/4 1, supplying and erecting pvc trunking (pvc casing- capping) of size 25 mm with accessories on wall/ceiling, supplying and erecting pvc trunking (pvc casing-ncapping) of size 32 mm with accessories on wall/ceiling, casing t section 25 mm, casing t section 32 mm, casing l section 25 mm, casing l section 32 mm, pvc gitti, wooden gitti, earthing wire 32 no. (isi mark), earthing wire 18 no. (isi mark), pipe type earthing 40mm gi pipe or gi rod 20mm, g.i pipe a grade 50 mm (isi mark), earthing plate (isi mark), ceilling rose, 2x1.5 sqmm fr copper pvc insulated wire, 2x1.5 sqmm fr aluminum pvc insulated wire, 2x2.5 sqmm fr copper pvc insulated wire, 2x2.5 sqmm fr aluminum pvc insulated wire, 2x4 sqmm fr copper pvc insulated wire, 2x4 sqmm fr aluminum pvc insulated wire, 2x6 sqmm fr copper pvc insulated wire, 2x10 sqmm fr copper pvc insulated wire, 2x10 sqmm fr aluminum pvc insulated wire, 3x6 sqmm fr aluminium pvc insulated wire, 3x10 sqmm fr aluminium pvc insulated wire, service wire 4mm, single core 6mm, service wi

Central Government/Public Sector

CTN :40011782

18 Apr, 2025 1.57 Lacs

Bhandara - Maharashtra

Tender For procurement of electrical tools for electrical department at dongri buzurg mine - complete electrical tool kit 1) double sided screw driver 6"- inos, 2) double sided screw driver 8"-1nos 3) double sided screw driver 10"-1nos, 4) neon tester- 1 nos 5) ring spanner set-6 to 32 mm-1 set 6) de spanner set-6 to 32 mm-1 set 7) hollow spanner set 6 to 32mm-1 set 8) allenkey spanner set-1-1/2 mm to 10 mm-1 set 9) combinationplier-8"-1 nos, 10) long nose plier-8"-1 nos 11) adjustable hacksaw frame-inos 12) adjustable spanner-8"-1 nos 13) 600a clamp meter - 1 nos 14) 600v digital multimeter-1 nos 15) cable cutter knife-1 nos 16) universal wire stripper 7"-1 nos 17) tool bag heavy duty - 1 nos make bosch, taparia guaranty and warranty - 1 years , hss drill bit set 1-13mm make bosch, taparia and equilent guaranty and warranty 1 years , drill bit set for concrete make bosch, taparia and equilent guaranty and warranty 1 years , drill machine 600w rpm: 3000, drill attachment, reverse rotation, variable speed, make bosch, taparia guaranty and warranty 1 years , rotary hammer drill machine power-720w, 230v ac, rpm: 0-4800, tool holder sds plus, make bosch, taparia and equilent , guaranty and warranty 1 years angle grinder make , power-970w, make bosch and equilent guaranty and warranty 1 years universal bearing puller , pipe wrench 14" make bosch, taparia and equilent guaranty and warranty 1 years , pipe wrench 18" make bosch, taparia and equilent , guaranty and warranty 1 years vacuum cleaner wet and dry power-1000w, 20 ltr, stainless steel container, 2 , mtr. section hose, filter bag guaranty and warranty 1 years , cordless blower bosch with rechargeable wind volume: 120m3/min, rpm: 17000 , battery: 18v, with charger make: bosch and equilent warranty 1 years , electrical blower 600w air flow: 2.8m3/min rpm: 0-13000 make: bosch and equilent guaranty and warranty 1 years

State Government

CTN :39299075

15 Apr, 2025 NA

Delhi - Delhi

Tender For corrigendum : tender for supply of line tester , 7 drawer tools trolley , combination wrench set (mm) , combination wrench set (inches) , 1/2 inches drive deep socket set , torque wrench , centre punch , hammer 250 gram , hammer 500gram , hammer 1kg , hammer 5kg , soft face hammer , straight snips , file set , desoldering , digital meter , multi meter , grease gun 3kg , grease gun 10kg , wise 8 inches , wise 12 inches , hand grinder 4 inches , rubber hammer , 1/2 inches socket set 7 to 32 hd (mm) , 1/2 inches socket set 7 to 32 hd (inches) , wd 40 (500ml) , rubber hand gloves , safety shoes , 100-meter measuring tape , 3-meter measuring tape , measuring wheel , rivet gun (heavy duty) , adjustable wrench 8 inches , chain wrench 2 inches , chain wrench 4 inches , chain wrench 6 inches , ball pin hammer 100gram , ball pin hammer 250 gram , hydraulic jack 6 ton , hydraulic jack 2 ton , piston ring compressor rc-3 , piston ring compressor rc-4 , piston ring compressor rc-5 , ring expander , 1/4 inches socket wrench , bit socket set , 1/2 inches screwdriver set , matric safety comb wrench set , t handle wrench 12 inches , wrench kit , key wrench ball point set , key wrench star point set , flat chisel 6 inches plus 8 inches set , screw driver 12inches , screw driver 6 inches , screw driver 18inches , wire cup brush 3 inches , drill bit set 1-13mm , drill machine , welding rod , 3/4inches t handle extension 4 inches , 3/4 inches drive 34 socket , 3/4inches drive 36 socket , 3/4 inchesdrive 38 socket , 3/4inches drive 42 socket , 3/4inches drive 48 socket , 1/2 inches drive handle t l type , 1/2inches extension 5inches , 1/2 inches extension 8inches , 1/2 inches extension 12inches , rpm tester , grinding goggles , face shield , face shield glass , pipe wrench 8 inches , pipe wrench 12 inches , pipe wrench 18 inches , pipe wrench 24 inches , adjustable wrench 12 inches , adjustable wrench 18 inches , bearing puller 2 jow 12 inches , bearing puller 2 jow 6 inches , bearing puller 3 jow 12 inches , bearing puller 3 jow 6 inches , bearing puller 3 jow 16 inches , air hose reel , washing tray , tachometer , oil extractor , welding machine 300 amp , battery charger , nozzle tester , alternator testing , compressor portable , painting gun , table grinder , tyre pressure gauge , extension bit , diesel engine compressor kit , petrol engine compressor kit , impact wrench , flank socket set , tab kit inner outer , circuit tester , soldering iron set 120 watt , automatic circuit voltage tester , vehicle battery tester , hydrometer , new fire extinguisher , co2 gas type 4.5 kg capacity , new fire extinguisher , abc powder type 6 kg capacity , new fire extinguisher , mech. foam type 9 ltr capacity

Central Government/Public Sector

CTN :39970914

29 Apr, 2025 NA

Bathinda - Punjab

Tender For supply of battery operated rotary hammer drill st machine complete with battery pack (02nos), charger, hammer drill bit (4 cutting edge made of tungsten carbide) 10mm 12mm and 16 mm, narrow flat and pointed chiesel single impact energy 2.6j, 1050 rpm, hammer drilling range 4mm to 28mm, optimum drilling range 6mm to 18mm, weight of tool must be less than 3kg, active torque control (atc), inbuilt active vibration reduction (avr), chiseling, chipping, depth gauge, removable chuck, reverse mode, torque clutch, triaxial vibration value for hammer drilling into concrete must be less than 11 (m/s2), triaxial vibration for chiseling in concrete must be less than 6(m/s2), 1st battery 22 (v) 8amp, weight less than 1.5kg, 2nd battery 22 (v)-4amp, weight less than 1.0kg, battery working range minus()17 degree to 60 degree, state of charge display, upgraded durability and battery monitoring ac??? built-in battery health tester, sealed electronics, shock absorbers and reinforced housing to better protect against jobsite conditions, battery charger i/p 230v, o/p power 240, o/p current 9.6amp, state of charge display. , supply of electrically operated concrete breaker with self sharpening chisels (four numbers). 02 nos 36 cm narrow flat chisels, 01 no 36 cm pointed chisel and 01 no 50 cm narrow flat chisel. the tool shall be of the following specification i.e impact energy 35j, impact frequency 1800, vibration to body less than 5m/s2, weight of concrete breaker tool must be less than 15kg, power i/p approximate 2.1kw, brushless motor, detachable supply cord, three lubricating chambers inside machine

Central Government/Public Sector

CTN :39915347

25 Apr, 2025 NA

Multi City - Multi State

Tender For supply of digital vibration meter lutron vb-8201ha or htc vb-8205 or metrix + vb 8202a to measure acceleration, velocity and displacement with frequency range -10 hz to 10 khz. sensor - piezo electric accelerometer, 3-1/2 digital lcd display, displacement; 0-2000 microns pk-pk, velocity; 0-200 mm/sec pk , frequency response; 600 rpm to 60000 rpm. with magnetic base, vibration sensor with 2m cable and hard c arrying case, minimum 01 year warranty with instruction manual. (technical specification is attached in do cument tab). make/brand- lutron, htc, metrix, acd machine or similar to reputed brand. [ warranty pe riod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39915451

15 Apr, 2025 NA

Multi City - Multi State

Tender For supply of special heavy duty pneumatic drilling machine cap-10mm in steel with standard accessorie s such as drill chuck with key-1 no. 1/2 inch bsp adopter. free speed -2200 rpm . grip-pistol type length with chuck -190to 200mm. weight-1.2 to 1.5 kg approx. working pressure -70 to 90 psi. air inlet -3/8" bsp . air connection - 1/2" bsp adaptor . machine shall work at 70 psi. [ warranty period: 30 months after the date of delivery ]

Dampener Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors