Latest dashboard cover Tenders | Government dashboard cover Tenders

CTN :40055288

28 Apr, 2025 16.50 Lacs

Hoshiarpur - Punjab

Tender For estimate for opening of choked/blocked ms liner pipeline of patiari dam district hoshiarpur

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

corporations/Associations/Others

CTN :39972549

24 Apr, 2025 NA

Kochi - Kerala

Tender For auction sale of ms scrap,used /torn jumbo bag with/without liner,used and scrapped hdpe/ ldpe plastics,used and scrapped ms drums,used unserviceable and scrapped cables

CTN :39888178

02 May, 2025 11.51 Lacs

Gwalior - Madhya Pradesh

Tender For supply of hand pump spare parts i.s.i. mark and conforming to is/5500 part (1) ball bearing 20 bc opp (2) hexagonal bolt m-12 x1.75 x40 (3) hexagonal nut m-12 x 1.75 (4) hexagonal coupler m 12 x 1.75 (5) reducer cap (6) cylinder body with brass line - ball bearing 20 bc opp, hexagonal bolt m12x1.75x40, hexagonal bolt m12x1.75, hexagonal coupler m12x1.75, reducer cap, cylinder body with brass liner, chain with cupling, connection rod, stand (galv.), water tank complete, head (galv.), ss handle axis, sealing ring, upper valve guide, isi mark india mark ii deepwell hand pump complete with 10 nos m.s. connecting rod

Central Government / Public Sector

CTN :39884275

23 Apr, 2025 NA

Secunderabad - Telangana

Tender For supply of set of manganese steel liners for 3-phase locomotives as per irs r-65. set consists of 02 ite ms. set details as follows. 1.liner size:40x40mm; thickness-2mm qty-01 no. 2. liner size 40 x 40 m, thick ness-04 mm-qty-01 no. note: brake all sharp corners ir (1/32 r). [ warranty period: 30 months after the date of delivery ]

CTN :39803158

22 Apr, 2025 70.00 Lacs

Koppa - Karnataka

Tender For supply, installation, commissioning and operation of 500kg per day capacity sikakai processing and packing plant at lamps society, koppa, chikkamagalur district under ntfpce project-feeding tray for feeding material into pre-grinding chamber.tray size 210x90x12mm (lwd) and electromagnetic vibratory feed hooper moc - sselectrical rotary air drier with 3mt. conveyer, 3hp motor, 3hp blower, and 10 kw electrical heater with control panel compete set moc - ms. (to remove the moisture in the sikakai before feeding to the floor mill customized design: bidder shall provide the technical specification along with technical bid. heater and motors capacity may varies depending on the design)vertical pre-grinding chamber with 10 hp motor and cyclone tank (upto 2000 microns) moc ms.impact pulveriser (ip 25) flourmill with blower, cyclone separator, whizer classifier and cotton balloon main contact parts are tray crushing chamber liner, hammer, toothed liner classifier, blower liner & leaf, airpipe & cyclone tank. shaft, boss plate and body fabricated in ms.(purpose: fine grinding of the blended materials) rotary air lock valve with hp motor. moc-msclosed type group filter with self-cleaning air purging unit with 5 hp low pressure blower and a suitable capacity compressor. mild steel fabricated slotted basement with anti-vibration mount, motor pulley, v belt and belt guard (suitable for fixing ip 25 and motor)30 hp 3 phase motor 1440 rpm - preferrable make : crompton / havells / siemensvibro sifter (pvs 24) single deck type with 0.5 hp motor dust cover and 600 mm dia. sieve 20 mesh mesh/micron size (fine powder output). moc - contact parts in ss 304 and remaining in ms.screw elevator with 1.0 hp motormixing machinery - ribbon blender (prb 100) volume of vessel - 300 ltr, handling capacity per batch by weight-100 kg and by volume-200 ltr. with 2 hp motorcrompton make or equivalent, reduction gear bonfiglioli make or equivalent, feed guard grill, lid, discharge shutter, left and right ribbon. moc contact stainless steel 304 and frame in ss 202screw conveyerwith 1.0 hp motor for feeding to the to collect silo) moc contact parts ss 304. shifting the powder from impact to storage xylo, hp stirrerstorage tank 500kg capacity1000 ltr volume 500kg by wt. with butterfly valve & fitted with vibro motor 0.5 hp-1 nos and support frame. ss 304 silo material, frame in ss 202. screw conveyor with 1.0 hp motor contact parts in ss 304, (for feeding to packing machine) vffs with servo auger anti trickling attachment to pack sikkakai powder 50gm, 100gm and 200gm, speed - 30 to 35 packets/min (depending upon the range & nature of product), accuracy - 0.5 to 1%, power - 2 kw & 1.5 kw heating, 1 hp stirrer motor, packing material - laminated film like polyester poly, metalized polyester, bopp, opp etc. (including extra collar and screw). including hot foil coding machine.5 hp air compressor(oil free) including the necessary accessoriesconveyer vertical band sealer machine.double stage mill (dm410-2) with pre crushing and fine grinding chamber, fine grinding chamber size 4" width x10" dia, cutting hammer 4 nos, fine grinding hammer 4 nos, toothed steel liner, water cooling jacket, sieves and cotton balloon. material of construction ss (for grinding small quantity of material) 10 hp siemens 3 phase motorparts of flour mill - ms fabricated slotted basement with anti-vibration mount, motor pulley, v belt and belt guard. (suitable for fixing one pulveriser and motor)cubical control panel fabricated in cr sheet for total power (75 hp for machineries) with fuse links, fuse switch, starters, capacitor, ammeter, volt meter, volt selector and panel fixtures. earth pipe and earth wire cable from motor to panel and electrical wiring for plant & machineries plant including electrical wiring inside the building wherever necessary plastic bag top stitching machine. (100 bags / hr.)trolley ss 202 size 5' length, 3' width and 2' height fitted with 4 whe

Dashboard Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government / Public Sector