Get complete information related to latest Delta Starters Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Delta Starters Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Delta Starters Tenders.
Tender For supply installation and commissioning of lab. equipment for civil engg dept - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity including accessories and toolkitspecification:-1. machine capacity required : - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity. digital compression testing machine shall confirm is 516 and is 14858. digital compression testing machine for testing concrete cubes of size 100mm, 150mm, 200mm ,300mm and concrete cylinder specimen up to 300mm diameter and 300mm height . also the cement mortar cubes of 70.7 mm size and 50mm size. 2. loading frame:- steel welded loading frame with top cross head base and solid side walls. hydraulic piston is fixed to the base and platens are hardened, ground and polished. the upper and lower plate should be marked with the guidelines on the lower plate to keep the specimen co-axially with hydraulic jack. the machine should be provided with suitable side spacers as standard to accommodate the variety of sizes of specimens as indicated above. the two speed pump to allow fast approach of platens for daylight closure and also to allow precise control over load application using control lever and valves.3. digital display:- display shall show force and stress values in si units. the electronic control unit shall be based on suitable processor with a built in interface for laptop and computers. the processor speed shall be such that the online load deformation curve on full screen is smooth.4. the storage capacity to record and store 2000 complete test results with the facility of printing results/logged data through built in parallel port. least count of 0.1 kn.5. automatic controls for switch off on overload or over travel or specimen break or manual termination.6. power supply :- suitable for operation on 220v/230v single phase 50hz ac supply 7. additional requirements maximum clearance between plate 400mm. maximum distance between side platen 400 mm platen size 320mm square.8. flexure attachment:- flexure testing machine of 10 tons ( 100kn) capacity confirming to is 516. loading to be applied by the downward movement of piston. machine shall be suitable to test beams of 100x100x500 mm and 150x150x700mm.machine shall be supplied with suitable standard spacers for testing different sizes of beams.9. additional requirement for flexural test: three point loading light weight rugged high strength frame.least count 0.1 kndistance between supporting rollers: - 600mm for 150x150 x700 mm beam and 400mm for 100x100x500 mm beamdistance between loading rollers 200mm for 150x150x700mm beam 133 mm for 100 x 100 x500 mm beam power supply suitable for operation 220v 50hz single phase.10. the machine should be supplied with accurate toolkit11. compatible software should be included
Tender For for the work of making new 11 kv feeder from 33/11 kv university road sub-station to new building of md pvvnl office and installation of automatic change over switch in business plan 2024-25 scheme under eudd-11 kv north, meerut.
Tender For supply of engineering laboratory equipment and machineries for department of food technology and dairy technology - purchase of engineering laboratory equipments and machineries, venturimeter test rig1 dia cast iron venturi tube, pressure tappings, manometer, 0.5 hp motor-pump unit, orifice meter test rigorifice plate 20 mm, differential manometer, water circulation setup, reynold s apparatusglass tube, dye injector, constant head tank, flow regulator, pipe friction apparatus1 ss pipe (1.5 m), inlet/outlet pressure tapping, differential manometer, minor loss apparatusbends, elbows, sudden contraction/expansion, differential manometer, u-tube manometeracrylic body, 0 300 mm water column, mercury-free, inclined tube manometertransparent acrylic tube with adjustable scale, 0 200 mm range, piezometer board7-tube setup mounted on frame, for pressure head measurement, rotameter calibration setupflow range 0 2 l/s, with pump and flow control valves, pitot tube apparatusss tube, manometer connection, stand-mounted, reciprocating pump test rigtransparent cylinder, 0.25 hp motor, discharge measuring tank, centrifugal pump test rig1.0 hp motor, pressure gauges, energy meter, closed-loop flow system, gear pump test rigoil-compatible, 0.5 hp motor, discharge measurement unit, emptying time of tank apparatusacrylic tank (50 l), interchangeable orifices, stopwatch, free flow channel apparatusopen flume (1.5 m), v-notch weir, point gauge, recirculating pump, pipe and fittings display unitss, pvc, and ms pipe samples with elbows, tees, reducers, valve display unitgate, globe, butterfly, check, ball valves cut section models, digital tachometernon-contact optical, range 0 9999 rpm, flow measuring tankgraduated (0 25 l), acrylic, stopwatchdigital, accuracy 0.01 s, single phase transformer test bench1 kva, 230/115 v with meters for open circuit & short circuit tests, three phase induction motor (squirrel cage)3 hp, 415 v with dol starter and reversing switch, single phase slip ring induction motor1 hp, 230 v with rotor resistance starter (manual/automatic), dc shunt motor with 3-point starter1 hp, 220 v with field regulator, dc shunt generator coupled set1 hp, 220 v dc motor coupled to 1 kw generator, voltmeter(ac/dc) - 0-150v,0-300v (each 5 nos), clamp meter - 0 600v, 0 200a
Tender For corrigendum : supply of proc of power eqpt - modular ups , automatic transfer switch , digital power control panel , central power distribution , thermal monitoring sensor , aluminium cable , copper cable , active harmonic filter , digital grounding devices , earthing , integration , iptc , xlpe cable for working voltages up to and including 1. 1 kv as per is 7098 (part 1) (q2) , pvc copper cable single core and multi core circular sheathed cable with rigid conductor (v2) as per is 694 (q2)
Tender For supply of incubator - 4002236, 1.000, hot air ovenouter body made of thick mild steel sheet duly powder coated and inner ss. double walled construction with 2.5 inch gap with best quality glass wool.temperature range: +5 to 250 c fitted with thermostat controller, temperature controller knobperforated shelves and workable on 220 volts 50 hz ac mains. rubber feet are fitted at bottom from corners.with air circulating fancapacity- 45 l, chamber size- 350 x 350 x 350 mm, 4005543, 1.000, hot platemounted on a thick m. s. sheet body, a smooth surface cast iron plate with an electrically operated element laid under the plate. fitted with enery regulator. a three step rotary switch works on 220/230 volts a.c. controls heating. the plate is finished in heat resistant black and the body in stoved blue white painted.rectangular top type, 30 x 35 cm, power rating 1 kw, 4005570, 1.000, ph meter range ph: 0 to 14 phmv measurement : 0+/-1999 mv.(ph, mv and temperature measurement)automatic or manual temperature compensation.3 point ph calibration,display : 4 digit led displaystandard buffer capsules: 4,7 & 9.2 phelectrode:1 set of electrode, stand & clamp, 4063710, 1.000, paneer mouldmaterial: ss-304 (food grade, corrosion resistant).shape: square / rectangular (with perforated sides and bottom) dimensions (approx.):length: 150180 mm, width: 150180 mm ,height: 120150 mm, wall thickness: 1.01.2 mmfinish: smooth, polished, easy to clean. capacity: ~12 l milk curd (~250500 g paneer per mould).accessories: detachable lid/cover for pressing., 4020915, 1.000, pilot scale cream separatortype semi automatic tank capacity : 5 ltr 10 ltrbody material : ss 304 and ms
Tender For supply of automatic light controlling nature switch device grade sensors and advanced micro controllers with suitable power contactor and mcb, enclosed in a a frp enclosure for pole mounting, confirming to is-54 and similar to swadep-02 ec-03 kw 1phase.the device should have the following specifications. (1) voltage range: 120v, ac 50hz. (2) switching endurance 5000 cycles of on and off minimum. (3) operating illumination levels (a) for switching on-less than 60 lux for 30 seconds. (b) for switching off-greater than 10 lux for 30 seconds. (4) auto voltage levels. (a) high voltage trip/auto reset- if voltage and gt 280 ac/and it 270v resp. (5) led for indicating the operating status. (6) during based switching of option of 04 to 08 hours with resolution of 1/2 hour. (7) over ride option continuous on and continuous off. makes: swadep-02 ec-03kw of kakatiya energy systems/ ssge or similar. note: (1) warranty and test certificate should be sent with material (2) one sample to be got approved by consignee before bulk supply.