Latest desk tidy Tenders | Government desk tidy Tenders

CTN :43220390

24 Dec, 2025 20.00 Lacs

Rupnagar - Punjab

Tender For renovation of research lab no.1 (room no 217) at 1st floor of department of chemistry in p.u. campus, sec-14, chandigarh - supply of furniture/fixture fittings, island laboratory table for overall dimension 4800mm(l)x1500mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) on each side of one drawer & below it twin swing door, 2nosstorage of cabinet of 600mm(l)having a swing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of thelab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 4200mm(l)x750mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 6600mm(l)x750mm(w)x900mm(h)modular table shall consist of 6 nos storage cabinet of 750mm(l) twin swing door, 2nos storage of cabinet of 600mm(l)having aswing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of the lab table shall be provided with lockingfacility. the body of storage of cabinet should be made of 0.8mm thick crca ms sheet havingdouble side wall and door should be 16mm to 18mm thick with square edges made of 1mm thick crca ms sheet. the swingdoor should be affixed with zero crank hydraulic steel hinges and drawers move on ball slide tetescopic channels. handles of theshutter should be pvc recessed. each storage cabinet sink module should be provided with base frame madefrom30x30x1.2mm crca square pipe having nylon adjusters. the thickness of granite shall be 18mm if required at site., wall side laboratory table for overall dimension 2400mm(l)x750mm(w)x900mm(h)modular table shall consist of 2 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. or equi

corporations/Associations/Others

CTN :43256191

09 Jan, 2026 1.97 Crore

Ahmedabad - Gujarat

Tender For supply of classroom teacher chair , classroom teacher board , principal room table , vice principal room table , principal room chair , principal room visitor chair , vice principal room chair , vice principal room visitor chair , sofa foyer one seater , sofa foyer two seater , sofa foyer three seater , coffee table , staffroom modular knock down type island table , staffroom modular knock down type work space , staffroom chairs , locker for principal and vice principal , glass door storage for librabry , wall mointed open book shelf , librabry modular knock down type island table , library chairs , computer work station , computer chairs , glass door storage for laboratories , knock down type modular physics laboratory tables , knock down type modular island physics laboratory tables , knock down type modular chemistry laboratory tables , knock down type modular island chemistry laboratory tables , knock down type modular biology laboratory tables , knock down type modular island biology laboratory tables , lab stool , dining table , dining bench , bed partitions , room wardrobe , modular kitchen under storage and over head counter , kind size bed , side table , dining table 6 seater with chairs , sofa foyer two seater teacher board [excluding cost of interactive flat-panel display (ifpd)] technical specification for smart board with double-track sliding system for green and white boards fitted in an anodised aluminium frame with concealed cable management and provision for mounting of digital screen: supply, installation, testing, commissioning (sitc) of an integrated digital teaching learning solution comprising: (a) anodised aluminium frame, double track sliding system for white & green board and provision for mounting of digital screen with concealed cable management, (b) vitrified ) /bid number : gem/2025/b/7022877 * /dated: 19-12-2025 & & / bid document 1 / 47 magnetic ceramic-steel green board and white board panels. dimensions and configuration: total width of the setup is ~12 feet and height ~4.0 feet from the board surface (excluding the width of aluminium frame). material: providing and fixing anodised aluminium (alloy 6063-t6) framed sliding system for smart board with minimum 2.0 mm thick extruded sections, anodised to aa15 grade as per is 1868, mounted on a heavy-duty top-hung aluminium track (min. 2.5 mm thick) with sealed ball- bearing nylon/pu rollers (load capacity not less than 120 kg per panel), concealed bottom guide, epdm gaskets, ss-304 fasteners, pelmet/valance cover, and soft end-stops/soft- close mechanism, including all brackets, fixings, alignment, cable provisions, commissioning, and making good complete as per drawings and engineer-in-charge. design: one slot to fix ifpd, other slot for green & white boards sliding on double track system with locking facility on sliding frame to keep the ifpd display safe. top & bottom rails: tracks shall be aligned and reinforced to ensure boards move easily and without wobble. back side: the backside of the smart board, to concealed the wall surface, provided & fixed with 18 mm thick hdhmr board laminated (white coloured matte finish) with 0.8 mm, edges sealed with 1 mm pvc edge banding, fixed to the anodised aluminium frame with concealed screws/rivets, with ventilation slots as required, and shall be moisture, termite and borer resistant. load capacity: safe to hold ifpd + white & green boards with 1.5 safety factor. cable management: built-in channels for power, lan, hdmi, usb. safety: rounded edges, tamper-resistant covers, concealed fixing. finish: durable, corrosion-resistant coating suitable for indoor use. additional requirements: (a) all boards and the structure must be securely fixed to the wall with appropriate fasteners. (b) provision for cable management must be included for the ifpd (i.e., concealed conduit/path for power and data cables).(c) the unit must be free from sharp edges, splinters, or any protruding parts tha

Central Government/Public Sector

CTN :43257950

09 Jan, 2026 NA

Kamrup - Assam

Tender For supply of electrical workbench , island workbench , office table , office chair , stainless steel lab stool

corporations/Associations/Others

CTN :43268404

10 Jan, 2026 2.73 Crore

Kamrup - Assam

Tender For supply of classroom duel desk large,classroom desk medium,teachers table,teachers chair,teacher board,vice principal table,principal chamber visitors chair,vice principal chair,vice principal chamber visitors chair,coffeetable,staff room table,staff room work space with inbuilt lockable overhead storage,staff room chair,personal locker,library glass door steel almirah,one side book self library,library room table,computer room table,computer room chair,lab glass door steel almirah,physics lab table,physics lab island table,chemistry lab table,chemistry lab island table,biology lab table,biology lab island table,lab stool,mess six seater dinning table,mess bench,bed and partition wall,wardrobe,modular kitchen,king size bed,side table,sofa one seater,sofa two seater

State Government

CTN :43258190

02 Jan, 2026 23.11 Lacs

Multi City - Telangana

Tender For refurbishment of central laboratory duly installation of island table, work benches, wall mounted storage cabinets, wall panel, micro filter air curtain, bio safety cabinet, and other installations for chemical section and bacteriological section for extending nabl scope of central laboratory so as to adhere the guidelines as per jal jeevan mission standards/regulatory norms under central laboratory qat wing, hmwssb

CTN :39752824

22 Dec, 2025 NA

Hyderabad-T - Telangana

Tender For bid to ras supply of chemical labratory furniture - l shape wall table 4430 plus 4570l x 830w x 750h in mm , wall table 2230l x 830w x 900h in mm , wall storage cupboard 900l x 300w x 600h in mm , wall storage cupboard 650l x 300w x 600h in mm , wall storage cupboard 700l x 300w x 600h in mm , wall storage cupboard 830l x 300w x 600h in mm , wall table 3650l x 750w x 900h in mm , sloted angle rack 900l x 450w x 1950h in mm , chemical storage cup board 900l x 450w x 1800h in mm , island table 2970l x 1500w x 900h in mm

Central Government And Public Sector

CTN :43164288

02 Jan, 2026 50.82 Lacs

Delhi - Delhi

Tender For supply of fume hoods along with afa 4000e airflow controller c c -fuming hood along with afa 4000e airflow controller , laboratory side tables with 16mm phenolic resin laminate working top , laboratory island tables with 16mm phenolic resin laminate working top , canopy hoods for laboratory side tables. , spot extractors for laboratory island tables , laboratory table along with pp sink with 16mm phenolic resin laminate working top and bench mounted eye wash station , wet scrubber with centrifugal blower , civil and electrical work for the installation of wet scrubber, fume hoods and utility pipings

corporations/Associations/Others

CTN :43198262

05 Jan, 2026 91.07 Lacs

Kamrup - Assam

Tender For supply of supply and installation of furniture and internal fits out at jnv east siang arunachal pradesh c c - classroom duel desk large , classroom desk medium , teachers table , teachers chair , teacher board , principal chamber table , vice principal table , principal chamber chair , principal chamber visitors chair , vice principal chair , sofa one seater , sofa two seater , sofa three seater , staff room table , staff room work space with inbuilt lockable overhead storage , staff room chair , personal locker , one side book self library , staff room table , staff room chair , computer room table , computer room chair , library glass door steel almirah , lab table , lab island table , lab stool , mess six seater dinning table , mess bench , guest house king size bed , guest room side table , guest room dinning table chair , guest room coffeetable

Central Government/Public Sector

CTN :43161143

02 Jan, 2026 NA

Indore - Madhya Pradesh

Tender For supply of laboratory furniture :-- island table , laboratory chair14 , laboratory chair1 , laboratory chair2 , laboratory chair3

Central Government/Public Sector

CTN :43148477

08 Jan, 2026 NA

Dharwad - Karnataka

Tender For supply of design supply installation testing and commissioning of chemical enginnering dcif lab furniture c c - u shaped wall table with under bench base cabinets , island table with under bench base cabinet and sink unit , wall cupboard , lab stool , bio safety cabinet , fume hood , ducting and blower , eyewash unit , sink unit with eyewasher , slotted angle rack with adjustable shelves , online ups 20 kw , gas pipeline , aluminium partition

Desk Tidy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors