Latest desoldering gun Tenders | Government desoldering gun Tenders

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

CTN :40931309

31 Jul, 2025 NA

Multi City - Multi State

Tender For execution of supply of 6000 at welding portion for fusion welding of rail joints by use of compressed air petrol/lpg along with three-piece mould by automatic tapping thimbles only for various rail section for maintenance of lwr track under jurisdiction of sr.den/central/ckp.(2nd call)

CTN :40879488

02 Jul, 2025 2.50 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For bridge unloader - bridge unloader, 1. design, manufacturing and supply of heavy duty out door bridge for sugar mill plant cane unloading conforming to is:807-1976 & is:3177- 1977 fabricated from m.s. plate section conforming to is:226/2062 steel in box type design with and carriage fitted with wheel of fusion welded having l type bearing housing for long travel (lt) wheel assemblies having span-22.00 mtrs capacity -05ton swl along with dismantling of old existing bridge and erection and commissioning of new bridge old existing cross travel trolley will be used. type of bridge-m.s. plate fabricated box type span-22.00 mtrs, unloading capacity -05 ton swl2. techincal specification:-type of bridge -box type (m.s. plated fabricated), capacity-05 ton swl, unloading capacity -80 to 100 ton cane/hr, utility-sugar cane handling, height of top of top rail from ground-10.00 mtrs, height of lift-12.50 mtrs, wirerope19mm, 6/36 construction fibre wire, long travel speed -23-25 meter/minute, box side plate height-1250mm, box side plate thickness8mm, top & bottom plate thickness-top plate-12mm thick, bottom plate-10mm thick, top & bottom plate width-500mm, baff /stiffener plate spacing -750mm, baffle/stiffener plate thickness-8 mm., 3. end carriage:- length-5000mm, height-450mm, centre distance for end carriage wheel-4500mm,centre distance of trolley wheel as per previous trolly.4. long travel mechanism:- size of rail top at long travel- width-60mm, height-25mm, size of rail section at cross travel-width-60mm, hight25mm.5. electric motors for long travel drive 5.3hpx960 rpm rating s4 duty, qty-02 nos.6. gear box for long travel:- type helical,model-hb-350, ratio-40:1, service factor-greater than 2 on installed power, qty-02 no7. coupling for long travel drive:- type geared type half gear model1038. breaks:- thruster-electro hydraulic thruster 18 kg/cm , dia-6", qty 02 no., floating shaft dia/length-70mm/800mm-1000mm9. wheel:- dia meter-420mm, bearing-22218 skf/fag make, housing l type, qty-04 nos, note:- (i)fabrication will be done using prime plates and sections and using mig, welding process. (ii)only tack welding will be done by electrode using arc welding(iii) parallelist of the cross travel rails/square bar, diagonals, deflection of the bridge & trolley will be accurate and confirming to standard and best engineering practices. (iv) bridge must be two coated by red oxide metal primer and two coats of golden yellow colour.11. electric panel for new bridge, resistance boxes for bridge motors, control cabin,12. electric wires, main switch push button control & cable trolleys for complete13. unloader.14. dismantling of old trolly and all its accessories and erection & commission of new trolly, frame and fitting of all old spares ie. rope, drum, thruster break etc complete testing and trail., scope of work1. supply of above mentioned bridge on for basis to mill site.2. dismantling of old unloader. 3.erection of new unloader bridge with old trolley & grab with complete electric work with new electrical panel for bridge and all electrical panel for trolley & grab. all wiring should be new & standard isi make

CTN :40855746

17 Jul, 2025 NA

Khorda - Odisha

Tender For supply of impact screwdriver set , diagonal plier , line tester analog voltage tester , professional use tape measurement tape , allen key set , twisted-stainless steel esd tweezer set , soldering iron 100 w, desoldering gun , anti cut safety hand gloves pvc coated gray white nylon safety gloves , anti-dust windproof eye protection goggles safety goggles , universal test protoboard diy bread board 8.5cm x 5.5cm 400 holes solderless pcb , digital multimeter , 9v battery , pvc tape , tool kit bag pack for all items , aduino uno controller

CTN :40639510

05 Jul, 2025 NA

East Singhbhum - Jharkhand

Tender For corrigendum : procurement of electro fusion machine along with mdpe tool and fittings for all 4 gail cgds - electricfusion machine for jamshedpur , manual squeezer for 20mm for jamshedpur , manual squeezer for 32mm for jamshedpur , manual squeezer for 63mm for jamshedpur , hydraulic squeezer for 90-125mm for jamshedpur , manual scrapper for jamshedpur , pipe rotary cutter 20-32 mm for jamshedpur , pipe rotary cutter 63 mm for jamshedpur , pipe rotary cutter 60 mm for jamshedpur , clamp 90- 125mm for jamshedpur , mdpe electrofusion machine with gps for patna , manual squeezer for 20mm for patna , manual squeezer for 32mm for patna , manual squeezer for 63mm for patna , hydraulic squeezer for 90-125mm for patna , manual scrapper for patna , pipe rotary cutter 20- 32 mm for patna , pipe rotary cutter 63 mm for patna , pipe rotary cutter 60 mm for patna , clamp 90-125mm for patna , electro fusion welding machine for varanasi , coupler mdpe pe-100 sdr-11 20 m for varanasi , coupler mdpe pe-100 sdr-11 32 mm for varanasi , coupler mdpe pe-100 sdr-11 63 mm for varanasi , coupler mdpe pe-100 sdr-11 90mm for varanasi , coupler mdpe pe-100 sdr-11 125 mm for varanasi , tee equal mdpe pe-100 sdr-11 20 mm for varanasi , tee equal mdpe pe-100 sdr-11 32 mm for varanasi , tee equal mdpe pe-100 sdr-11 63 mm for varanasi , equal tee mdpe pe-100 sdr-11 90mm for varanasi , tee equal mdpe pe-100 sdr-11 125 mm for varanasi , end cap mdpe pe-100 sdr-11 32 mm for varanasi , end cap mdpe pe-100 sdr-11 63 mm for varanasi , end cap mdpe pe-100 sdr-11 125 mm for varanasi , elbow mdpe pe-100 sdr-11 63 mm 90-deg for varanasi , elbow mdpe pe-100 sdr-11 125mm 90-deg for varanasi , reducer mdpe pe-100 sdr-11 32 x 20 mm for varanasi , reducer mdpe pe-100 sdr-11 63mm x 32 mm for varanasi , elbow mdpe pe-100 sdr-11 125mm 45-deg for varanasi , mdpe reducer d90-63mm pe-100 sdr-11 for varanasi , reducer mdpe pe-100 sdr-11 125 x 63 mm for varanasi , mdpe reducer d125-90mm pe-100 sdr-11 for varanasi , mdpe cap plus coupler pe-100 sdr-11 20 for varanasi , mdpe cap plus coupler pe-100 sdr-11 90m for varanasi , tapping saddle mdpe 32 x 20 m for varanasi , tapping saddle mdpe 63 x 32 mm for varanasi , mdpe saddle for varanasi , trans ftng mdpe 20 mm x 1by2 in for varanasi , tran ftng mdpe size-32 mm x 3by4 in for varanasi , valve mdpe 32 mm od for varanasi , valve mdpe 63 mm for varanasi , elbo mdpe 90 4in for varanasi , valve mdpe 125 mm od for varanasi , elbow mdpe for varanasi , electro fusion machine for ranchi , rerounding tool 63mm for ranchi , rerounding tool 90mm for ranchi , rerounding tool 125mm for ranchi , pe manual squeezer 20mm to 32mm for ranchi , pe manual squeezer 32mm to 90mm for ranchi , new development pe manual squeezer 63mm for ranchi , pe hydraulic squeezer 63mm to 180mm for ranchi , hand scrapper for ranchi , pipe rotary cutter 20 - 32 mm for ranchi , pipe rotary cutter 63 mm for ranchi , pipe rotary cutter 60mm to 125mm for ranchi , clamp 90 - 125 mm for ranchi , coupler pe sdr11 d20 for ranchi , coupler pe sdr11 d32 for ranchi , coupler pe sdr11 d63 for ranchi , coupler pe sdr11 d90 for ranchi , coupler pe sdr11 d125 for ranchi , mdpe transition fitting pe 100 sdr11 20mm - 1by2in for ranchi , mdpe transition fitting pe 100 sdr11 32mm - 3by4in for ranchi , mdpe transition fitting pe 100 sdr11 63mm - 2in for ranchi , mdpe equal tee 20 mm for ranchi , mdpe equal tee 32 mm for ranchi , mdpe equal tee 63 mm for ranchi , mdpe equal tee 90 mm for ranchi , mdpe equal tee 125 mm for ranchi , end cap pe100 sdr11 d32 for ranchi , end cap pe100 sdr11 d63 for ranchi , end cap pe100 sdr11 d125 for ranchi , elbow 45 pe100 sdr11 d63 for ranchi , elbow 45 pe100 sdr11 d90 for ranchi , elbow 45 pe100 sdr11 d125 for ranchi , elbow 90 pe100 sdr11 d63 for ranchi , elbow 90 pe100 sdr11 d90 for ranchi , elbow 90 pe100 sdr11 d125 for ranchi , mdpe reducer 32 x 20mm for ranchi , mdpe reducer 63 x 32mm for ranchi , mdpe reducer 90 x 32mm for ranchi , mdpe reducer 90 x 63mm

Central Government/Public Sector

CTN :40700236

23 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For manufacture and supply of combination portions for fusion welding of 60kg/60e1(r260 grad e) rail and 60 kg (90uts) rail with 25mm gap by alumino thermit process using compressed air petrol syst em/oxy lpg/ oxy propane pre-heating with 3 piece prefabricated mould (zircon washed) manually press ed/core shooted with auto tapping thimble and single shot crucible with latest alterations. (applicable rds o specification is |irs t-19-2021 rev.7.0),applicable str (schedule of technical requirement) tdgo017, v er 4.0, list of required consumables as per annexure.(the alteration in drawing, schedule of technical req uirement (str) and specification issued by rdso up to one day prior to tender opening date shall be applic able to this tender). [ warranty period: 30 months after the date of delivery ]

Desoldering Gun Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector