Get complete information related to latest Desoldering Machine Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Desoldering Machine Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Desoldering Machine Tenders.
Tender For corrigendum : providing of custom bid for services - custom bid for services - floor refubirshment of volvo bus b7r-volvo bus, b7r engine no.11449979 chassis no. yv3r625e8163605k16 unit id: 20-0103- 1) full floor and wall (total vinyl areas), vinyl will be replaced. 2) plywood will be replaced in full floor and wall (floor ply thickness 12mm and wall ply thickness 06mm), (brand green ply) 3) vinyl color : korunde grey, thickness 1.5 mm 4) labor charges and inspection charges should be included in final quotation. 5) work will be done at our place (new technical area, nscbi airport, kolkata airport, 700052) 6) require materials and transportation charges will be provide by vendor. 7) all consumables/ materials should be of standard quality after discussion with user department before submission of final quotation. 8) vinyl joints will be only vinyl welding with vinyl welding wire (color korunde grey). 9) the quotation of the refurbishment of the floor should be in square meter
Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl
Tender For repair of various items at ambikanagar library ward 82 - removing the existing cernent plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc.complete.note: following items to be executed after prior approval of superintending engineer., providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete., providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on bothsides, and finishing with french polish etc. complete., providing and fixing in position. (as per 1.5 * 0.1868 / 1982 ) aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38.1 * 1.02 mm at weight 0.547 kg/rmt. and window frame bottom track section 61.85 * 31.75 * 1.2r at weight 0.695 kg/rmt. top and side track section 51.85 * 31.75 * 1.3 mm at weight 0.659 kg/rmt. the shutter should be of bearing bottom 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 * 18 * 1.1 mm at weight 0.469 kg/rmt. and handle section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. and top section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. as per detailed drawings and as directed by engineer in charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour anodising with box., providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete., dismantling the r.c.c. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., providing and laying cast in situ/ready mix cement concrete m-20 of trap/granite/quartzite/gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand, providing and fixing in position tmt - fe-500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete., providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand face
Tender For supplying of materials to compound wall at govt primary school at kolur village in koppal taluka - the cost of all materials, centering, transportation, fixing, wastage and other extra charges etc, excluding, the cost of unskilled labour., transportation loading,. and unloading at 1% on material, tools and plants at 2 % on material, hom of cutting,. and grinding machine - 1, hom of welding, and grinding machine.,, mechanic class ll / mechanic hmp grade l/eme grade, welder grade, l, anticorrosive,. bituminous paint (black), ball bearing hinges heavy duty.,, cast iron spike,., ms plates,. 40 x 6 mm, ms plates,. 36 mm x 6mm, ms square rod,. 16 x 16 mm, dia 50mm ms hollow pipe b class 14 gauge,., painter class l, add brush, putty at 5% on cost, of distemper primer., distemper, primer., add gum / gangiwater / fevical and blue, at 10% of lime cost, burnt. lime/shell lime., add providing and removing scaffolding at 3 % on labour, add handling , loading and unloading at 1 % on material, solid concrete, blocks (40 x 20 x 20 cms)-4.00 n/sqmm., add sundries, charges at 2 % on material, add handling , loading and unloading at 2 % on material, casurina poles 100 - 150,mm, silver oak or equivalent, planks, binding, wire, tmt bars fe, 500, add watering charges, at 1 % on material., add sundries charges at1% on material., mixer ( concrete small, used in culvert), boulders,.,, bond stone 20 x 20 x 45, cm, size stone, 20 x 20 x 25 cms., miscellaneous,/unforeseen charges which are necessary during execution., add formwork and staging at 20% for height upto 5 m., mason class l (with tools), broken granite, metal 10 mm., granite, metal 20 mm., coarse, sand (zone iii), portland, cement
Tender For manufacturing, fabrication, supply with testing work 1 set (10 nos tiers) stop log gate for main spill way radial gate and shifting of old 1 set (10 nos tiers) stop log gate dam site to dam store including cost of gas cutting, welding, labours, materials, tools, tackles, scaffolding, transportations, painting etc as per standard drawing and specification and actual site situation and instruction of engineer in charge for radial gate size 51 x 48.5 at ukai dam reservoir project, district -tapi.
Tender For auction sale of various types of unserviceable brake drums,unserviceable brake shoe with liner,aluminium alloy materials,cast iron scrap,unserviceable gear shaft, crown wheels, fly wheel rings,uj cross etc,ms scrap iron,iron scrap items,old gi cut pieces,scrap auto parts,iron sheet metal items,unserviceable cylinder liners,unserviceable clutch disc,various types of unserviceable clutch and clutch parts,unserviceable propeller shafts, yokes and its parts etc,various types of unserviceable water pump, air compressor, turbo etc,scrap brake chambers, ddu, air dryers, apda etc.,tata and l/l engine head and engine block,unserviceable i- beam,air suspension frame,brackets,v-bar and its parts etc,unserviceable crank shaft, camshafts, connecting rods,scrap iron sheet metal items,unserviceable crown cage assy,scrap aluminum radiator and inter cooler,unserviceable slack adjusters.,drive assy,starter pinion,de bearing,sre bearing,ce bracket etc.,unserviceable fip body,db valve body,ac assy body and its parts,unserviceable fuel injection assy. leyland/tata,all types of unserviceable fip parts,atomizers,nozzle and its parts,unserviceable propeller shaft rubber boot with bearings.,electrical materials,scrap bearing,rusted metal oil and grease barrels-210ltrs,scrap empty metal oil and grease barrels-210 lts,unserviceable old seat frames.,radiator bracket, engine cross member,air suspension pars,scrap solinoid switch(old model),scrap solinoid switch(new model),scrap copper pipes,scrap cast iron powder,unserviceable welding set,unserviceable wiper motor and its parts
Tender For corrigendum : supply of welding department equipment and raw material - power source , robot , fixtures , gas cylinder , safety kit , lpt ndt kit , weld materials , welding booth , sample prep unit
Tender For procurement of various materials for cuntsruction of kicthen hall in nigadi - gpn-sharpening charges, gpn-mason class i (with tools), gpn-mason class ii (with tools), gpn-painter class i, gpn-unit cost as per the specification, gpn-mixer (concrete) - 1 cum capacity, gpn-mixer (concrete small used in culvert), gpn-hom of welding and grinding machine, gpn-hom of vibrator 0.71 days, gpn-hom of cutting and grinding machine, gpn-welder grade i, gpn-mechanic class ii/mechanic hmp grade i/eme grade, gpn-fitter class i, gpn-worksite facilities/creche/drinking water/first aid, gpn-conveyance, gpn-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, gpn-tmt bars fe 500, gpn-vitrified tiles 600x600 mm, gpn-whitening, gpn-ready mix primer paint (ready mix red lead paint), gpn-enamel metal paint, gpn-glazed tiles 300x450, gpn-m.s rods, gpn-border tiles 30 x 10 cms, gpn-plastic emulsion paint, gpn-dry distemper, gpn-portland cement, gpn-binding wire, gpn-silver oak or equivalent planks 38 mm thick, gpn-corbon electrodes, gpn-casurina poles 100 - 150 mm, gpn-rms gusset plate, gpn-ms pipes of 80 mm to 100 mm dia, gpn-super plasticizer admixture is marked as per 9-103-1999, gpn-ms flat, gpn-stone chistler class ii, gpn-the cost of all materials, centering, transportation, fixing, wastage and other extra charges etc, excluding the cost of unskilled labour, gpn-transportation/loading and unloading of material/lifting of material/centering charges wherever necessary /over head/wastage/unforeseen charges/miscellaneous which are necessary during execution, gpn-electrification, gpn-size stone 20 x 20 x 25 cms, gpn-broken stone aggregate 40 mm size, gpn-broken stone aggregate 20 mm size, gpn-broken stone aggregate 12 mm to 10 mm size, gpn-boulders, gpn-bond stone 20 x 20 x 45 cm, gpn-coarse sand (zone iii)