Latest desoldering tools Tenders | Government desoldering tools Tenders

Central Government/Public Sector

CTN :44842214

04 May, 2026 NA

Chennai - Tamil Nadu

Tender For bogie frame to drg. no. (a) icf/mrvc/d-0-3-001, alt "n", col-ii (or) (b) icf/mrvc/d/bt-0-3-001, alt "c", col -ii along with damper fixing bracket to drg. no. (339)ac/dcemu/d6-0-1-602,col.i - 4 nos andbolt complete to drg. no. emu/m/3ph-0-2-002, alt "c", col.i - 16 sets bogie frame to be supplied without nylon bushes where ever applicable and shall confirm to rdso/specn.c-9202, rev-2 or latest. the firm shall fulfil the requiremnt as per icf/md/specn/147, issue status 01, rev-02 with amendment no- 02. special condition : - suppliers commitment will be there to supply as per drawing -(a) ( for dash pot arrangement ) or as per new drawing - (b) ( for adoption of conical spring ). - one month notice willbe given to vendor whether he has to supply as per drawing - (a) or drawing - (b). -rate quoted will be applicable to both drawing - (a) and drawing - (b) . i) paint scheme shall be as per drawing. ii) qap to format icf/ims/md/f-31 shall be prepared along with relevant documents and kept ready for developmental/educational order. iii)firm should supply bogie frame along with the dimensional report, stress relieving report and radiography films. iv) firm should have induction/electric furnace for stress relieving of bogie frame. v) prototype inspection is applicable only for first time of developmental/educational order. vi) stage inspection to be done as below. (a) raw material stage 1. ensure the raw material used using portable spectrometer machining stage 1. dimensional checks 2. edge preparations (b)welding stage 1. weld parameter to be checked and recorded. (c) surface preparation and painting stage. 1. short/sand blast to the requirements. 2. painting process as per the specification. 3. final product inspection. [ warrantyperiod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44842218

04 May, 2026 NA

Chennai - Tamil Nadu

Tender For lwscz shell kit (a) lscz - one coach set of roof, 2 mm sidewall and end wall for lwscz coaches. 1) sidewall assembly to drg.no. (329) icf/sk3-1-4-091, alt 'b' , col- 1 - 1 no. 2) roof assembly to drg.no. (lwscz) 73916001, alt 'd', col-i - 1 no. 3) end roof assembly to drg.no.(ls) 58116066, alt 'h', col-i - 2 nos. welding pin to drg no 81410012 alt nil to be assembled on roof and sidewall 4) endwall to drg.no. (lslrd) 74115001, alt 'j'-2 nos. the firm shall fulfil the requirement as per icf//md/specn.200, issue status 01, rev 04 with amendment no. 01. the firm shall fulfil the requirement as per icf/md/spec-315, issue status-01, rev.00, amendment no. 01. firm has to supply roof and sidewall without applying etch primer. (b)one coach set of body shell items and partition frames for lwscz2(814) coaches to drg nos, 1. 81410002, alt nil- 1no. 2. 81410005, alt 'e'- 1 no. 3. 58210036, alt 'b'- 2 nos. 4. 67010011, alt 'a'- 2 nos. 5. 58110017, alt 'c'- 2 nos. 6. aag10457, alt nil- 4 nos. 7. aab10338, alt nil-16 nos. 8. 58110015, alt 'a'- 6 nos. 9. 58110016, alt 'a'-3 nos. (c) under frame arrangemnt to drg no. 81411001 alt 'f' the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : a) -packing as per icf/j&t/misc-2201, alt 'e', safety instruction as per icf/j&t/sk-1867, alt. 'nil' -packing as per icf/j&t/sk-1809, alt 'a'. b) - packing condition as per icf/j&t/sk-1865, alt "a". c) packing condition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframe should be supplied as normal side up and side bearer side down. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly& welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor withcross members to avoid bi-metallic corrossion. [safety item ]

Central Government/Public Sector

CTN :44843152

07 May, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : shell kit for memu dmc2 jk 946 a. roof assembly 94416001 000 01, alt 'nil' - 1 no. location of sidewall 94414001 000 01, alt 'nil' - 1 no. end construction pail end 94615001 000 01, alt 'nil' - 1 no. firm shall fulfill the manufacturing facility as per icf/md/specn-200, issue status 01, rev 04 with amendment no 01. firm shall fulfill the manufacturing facility as per icf/md/specn-315, issue status 01, rev.0 0with amendment no 01. b.supply of one coach set of body shell items and partition frames for memu dmc2 jk 946 to drawing nos: 1. 94410003 000 01, alt 'a' - 1 no 2. 74510257 000 01, alt 'nil' - 1 no 3. 94410004 000 01, alt 'nil' - 1 no 4. 74510045 000 01, alt 'nil' - 1 no 5. 94410005 000 01, alt 'nil' - 1 no 6. 94410002 000 01, alt 'b' - 1 no. 7. 94410076 000 01, alt 'nil' - 1 no 8. 94410072 000 01, alt 'nil' - 1 no 9. 94410054 000 01, alt 'nil' - 2 nos. c. under frame arrangement 94411001 000 01, alt 'a' - 1no. firm shall fulfill the manufacturing facility as per icf/md/specn-147, issue status 01 rev.02 with amendment no.02. special condition : packing as per icf/j&t/misc-2201, alt 'e'. packing as per icf/j&t/sk-1809, alt 'a'. packing condition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframe should be supplied as normal side up & side bearer side down. packing conditionas per icf/j&t/sk-1865, alt 'a'. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]

corporations/Associations/Others

CTN :44835804

28 Apr, 2026 NA

Multi City - Multi State

Tender For complete repair & reconditioning, testing of pneumatic clamping systems for welding track including spares & consumables at ap&sd-ecil, hyderabad as per attached annexure d qty: 1 job note: vendor has to provide the schematic diagram & list of material in technical bid. vendor has to arrange necessary tools, consumables, logistics, etc. site visit is mandatory before bidding.

CTN :44846151

20 Apr, 2026 NA

Pune - Maharashtra

Tender For supply of industrial gum shoes,hand gloves,nylon full hand gloves,industrial rubber full hand gloves,industrial safety heat resistance full hand gloves,pvc electrical insulation mat,safety hand gloves asbestos material,heavy duty industrial safety helmet,industrial safety welding helmet,industrial safety welding goggles,wall mount first aid box,nylon mess pipe,industrial safety half face mask,portable hand grinder,ear plug,industrial safety goggle

CTN :44819770

20 Apr, 2026 NA

Kharagpur - West Bengal

Tender For supply of 2% ceriated tungsten electrode for tig welding, size : 2.4 mm. dia x 150 mm length in manufacturers sealed packed container of m/s. plansee austria make or m/s. miller weld/usa make or m/s gas weld ireland or weldcut make or equivalent/similar material along with dealer certificate & test certificate. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44802984

18 Apr, 2026 72.5 Thousand

Guna - Madhya Pradesh

Tender For tender for supply of bow welding electrode : : - flame proof , welding electrode holder , fully insulated , rating- 600 amps , size of electrode grip- 2 to 5.5 mm , type- tong type & spring loaded , material of construction- lower tong - brass , standard make- esab , advani , ador , welding electrode holder , fully insulated , rating- 400 amps , size of electrode grip- 2 to 5.5 mm , type- tong type & spring loaded , material of construction- lower tong - brass , standard make- esab , advani , ador , glass dark black for welding width 83.12mmxlength 107.75mmxthickness 3.3mm , welded glass plain size 83.12mmxlength 107.75mmxthickness 3.3mm approx. , oxygen -acetylene cutting nozzle cutogen a-24 suitable for esab make cutting torch (model-nm-250)size- 3/32 inch , make- esab/ador , cs electrode-aws-a5.1-e-6013/is-814 er 4211x , size-3.15mm x 350mm. make- ferroking-esab , norma-v-d&h(s) , dhn-3-d&h(1) , spew 0070-ador fontech , steelon standard-modi , superbond s -adore welding , overcord-superon-orlikon , cs electrode-low hydrogen , aws-a5.1 e-7018-1/is-814 , size-2.5mm x 350mm , make- esab 36h-esab , supera therme(mod)-d&h(s) , dhn-18-d&h(1) , superbase-dore welding , supercito-e- superon-orlikon

CTN :44687038

15 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : supply of construction material and b and r items cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 under job no 2392 , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63 90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 make tata sail jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make tata sail jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make tata sail jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make tata sail jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses purlin rafter and ms plate etc all as directed ms rhs of size 80x40x3.2 , ms rhs of size 50x25x2.9 , ms rhs of size 96x48x3.2 , ms plate of size 8mm thick , ms plate of size 10mm thick , ms plate of size 12mm thick , ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete , ms flat iron 40x5mm thick for wind , iron welding rod confirming to is 814 to 2002 , water proofing compoundconfirming to is 2645 to 2003 make pidilite dr fixit fevicol , quick setting compound make pidilite fevicol quick fix , cement based paint snowcem make berger asian nerolac , oil bound distemper washable quality of ) /bid number : gem/2026/b/7401084 * /dated: 29-03-2026 & & / bid document 1 / 37 & & ' ' /item category proprietary brand of make nerolac berger asian , birla white wall care putty water resistant white cement make nerolac berger asian , ppgi roofing sheet 10 ft x 3 ft long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4 to 5 micron epoxy primer , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa , synthetic paint enamelled og colour confirming to is 5 to 2004 , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium window triple track with frame of size 1000mm x 1000mm including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , ms anchor bolt suitable for rcc work 12mm dia 300mm long with 2 washer and a nut minimum wt of each bolt and nut is 450 gm complete all as directed , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick 1st quality confroming to is 156 to 2006 , white cement confirming to is 8042 oblique 1989 , curtain arrangement drapery and rod made of 25 mm dia , retaining wall height 8 mtr x 3 mtr 5 nos 40 mtr cement opc 43 grade packed in hdpe bag each 50 kg wt confirming to is 8112 to 2013 , coarse sand free from vegetation confirming to is 650 to 1991 reaffirmed 2008 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch confirming to is 1597 part i 1992 reaffirmed 2002 , pvc pipe 75mm dia 3 mtr long confirming to is 4985 to 2000 reaffirmed 2006 //bid details 2 / 37

Co-operative

CTN :44801506

23 Apr, 2026 NA

Nanded - Maharashtra

Tender For sealed tenders for mill spares ,hardware, iron & steel, knives & hammers, chains & chain spares ,electrical materials. ,special electrodes , valves, rubber material, gear boxes, instrumentation materials, centrifugal machine spares, pump & pump spares ,fabrication work ,various job works, welding accessories, jointing packing , polycab make cables.

CTN :44450544

15 Apr, 2026 NA

Vellore - Tamil Nadu

Tender For supply of knives for cane leveller - purchase of knives for cane leveller note : 1) material required with material composition test certificate. 2) the knives shall be hardfaced with chromcarb n6006, l&t make welding electrodes only. 3) all other details required as per drawing no.mh-10/2019.

Desoldering Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Co-operative