Latest di pipeline repair Tenders | Government di pipeline repair Tenders

State Government

CTN :40968350

25 Jul, 2025 8.14 Lacs

Bankura - West Bengal

Tender For 100 mm dia. m.s. delivery connecting line from 2 nos. vertical tubewell to manifold and 100 mm dia. m.s. pipe from manifold to ohr interconnection with jal jevan mission project for augmentation of betanal zone-a water supply scheme within indas

corporations/Associations/Others

CTN :40958177

17 Jul, 2025 1.53 Lacs

Kolkata - West Bengal

Tender For strengthening of ms cleat of leakage spot of 750 mm dia psc f.w pipe line at central ware housing corporation on taratala road.

CTN :40959970

18 Jul, 2025 12.49 Lacs

Raichur - Karnataka

Tender For providing and laying of 600mm ms pipe line at hyderabad road opposite of bsnl office in raichur city.

Corporations And Associations And Others

CTN :40937103

11 Jul, 2025 9.46 Lacs

Ghazipur - Uttar Pradesh

Tender For :provision of water facility at slf bhalswa - boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. all type of soil (350 mm dia), boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. rocky strata including boulders-350mm, gravel packing in tubewell construction in accordance with is:4097, including providing gravel fine/medium/coarse, in required grading & sizes as per actual requirement, all complete as per direction of engineer-in-charge., development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as reqd. the development shall be considered complete when gravel stop sinking, discharge ceased to improve and the sand contents are not more than 10 ppm after 20 minutes of starting the pump complete as reqd., providing, lowering and fixing/placing in vertical position ms black casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required. (b) 150 mm dia (nominal bore), providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell. (a) 200 mm dia., supply, lowering and fixing following size of g.i. pipe (m-class) i/c cutting threading on both sides etc. isi marked etc as reqd. (d). 50mm(nominal bore), s & f following size of g.i. elbow. as reqd. (d). 50mm, s & f ms clamp made up of iron flat of size 50x6 mm with 4 nut bolt for holding the gi pipe as reqd. (b) 50 mm., providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) : 50 mm nominal bore, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (e) three phase 7.5 hp having discharge of 480 lpm approx. at 48 m head., s&f following size of g.i.socket as required. 50mm, s&f following size of g.i.union as required. 50mm, p&f following sizes of pvc insulated & pvc sheathed copper conductor 3 core submersible cable confirming to is.694/1990 etc. as reqd. (b) 3x 4 sq.mm., supply of cubical type control panel board for three phase star delta starter, three position selection with auto switch for submersible pumping set of following rating complete with single phasing preventer in auto, contactor (25amp), 0/l relay tp, mcb, voltmeter, ammeter, vss and indication lamp etc. including lamp etc. including connection etc. as required. (a) 10 h.p. rating submersible pump set over load relay (range13-21 amp) & contactor (range 25 amp)., supplying and fixing following sizes of steel flexible safety rope for holding s

State Government

CTN :40939435

15 Jul, 2025 4.89 Lacs

Jummu - Jammu And Kashmir

Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

State Government

CTN :40941208

08 Jul, 2025 NA

Chandrapur - Maharashtra

Tender For material required gp kanpa tah nagbhid dist chandrapur - 80 mm. metal white-(hand broken metal) with royalty, 40 mm metal white- (hand broken metal) with royalty, 20 mm, , , , , 16 mm, 81 mm. metal white-(hand broken metal) with royalty, khila, , paver block, , , , steel hollow door frame, c.r.c sheet work, ms (grill work), vindow, tractar bhada, saddle, , ms (grill work), vindow, tractar bhada, saddle, , steel, , ferud, birla white, , , gi pipe, tank connector, rope waterproof, ms tank structure, gi tank structure, ms angle, j bolt, ms pipe, gi sheet, led light 14 watt, led light 12 watt, led light 80 watt, led light 100 watt, gi barbed wire, rcc modern bench (3 sheet), solar lugs, d c fuss, distic watar, m.s. pipe 1.5x1.5, m.s. plat, solar pannel, rcc pipe 600 mm, rcc pipe 450 mm, rcc pipe 300 mm, pvc pipe 150 mm, mat finish stainless steel (302 grade), inwell bore driling, battery lithium, led light 24 watt, semi integrated solar light, brekar, ro 12 ltr aqua, ro 25 ltr aqua, m.s. pipe 2x2, m.s. pipe 3x3, m.s. pipe 4x4, m.s. pipe 1x1, rcc pipe 900 mm, rcc pipe 800 mm, solar panel connector, dc wire, 75 wp spv module, ms powder coated battery box, ac wire, solar pump controller 1 hp, nipples, hdp pipe, gi l socket, cotter pin, inwell bore pipe, dustbin, profile sheet, g.i. sheet, jsb, jcb, murum/80mm/40mm metal compaction, , needle tyap, 2 nos, profile sheet screw, chain line fencing, putty, oil paint, oil bond destember, water proof cement paint, praymar dimond cut kota stone 2x2, style verified 2x2, ceramic tiles wall mattfinish ceramic tiles 30cmx30cm, chequered tiles 30cmx30cm, cement chechekr styles, sintex, nal toti, 15 mm walve, 25 mm walve, 32 mm walve, cpvc pipe 15mm, cpvc pipe 15mm, cpvc pipe 20mm, cpvc pipe 50mm, cpvc elbow 15mm, cpvc elbow 20mm, pvc pipe 90 mm, pvc pipe 110 mm, batching and mixing plant @75 cum, flush door, sink, kadppa, off grid inverter solar, cpvc t 25 mm, cpvc t 32 mm, cpvc t 40 mm, 32 mm pvc pipe, pvc pipe 63 mm, stone dust, 10-12 mm, 80 mm, 40 mm, cpvc 25 mm, cpvc t 20 mm, 12 mm, 10 mm, 08 mm, solar street light dc 14 w led, green mat, 16 mm nutbolt, ro 50 ltr aqua, gi high mast pole, granute stone, solar pump 1 hp, water tanker 5000 lt, cpvc pipe 25 mm, cpvc pipe 32 mm, cpvc pipe 40 mm, , murga, , , , acrylic polymer modified liquid, , cpvc 15 mm , cpvc 20 mm, cpvc 25 mm, cpvc 32 mm, cpvc 40 mm, cpvc 15 mm t

State Government

CTN :40948007

18 Jul, 2025 2.84 Lacs

Bishnupur - West Bengal

Tender For 100 mm dia. m.s. delivery connecting line from 1 no. vertical tubewell to manifold and 100 mm dia. m.s. pipe from manifold to ohr interconnection with jal jeevan mission project

Central Government/Public Sector

CTN :40932913

18 Jul, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of bogie frame with brake rigging for wag-9 locomotive. bogie frame complete as per clw spe c.no.clw/ms/3/bogie/003 alt-2 or latest and drg.no.1209-01.112-202 alt-nil or latest along with brake gea r arrangement and details for wag9hc loco to clw drg/spec no.1209-01.116-059 alt-5 or latest and 1209- 01.216060 along with pipe line arrangement as per clw drg. no.1209-12.017-032 alt-1 or latest suitable f or brake system in fitted condition [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40947734

14 Jul, 2025 3.87 Lacs

Parganas - West Bengal

Tender For special emergency repairing of 711 mm dia (od) ms pipe rising main line near nilganj bridge and other ancilary work under north 24 pgs. water supply division-i, p.h.e.dte.

Central Government/Public Sector

CTN :40782475

18 Jul, 2025 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of bogie frame with brake rigging for wag-9 locomotive. bogie frame complete as per clw spe c.no.clw/ms/3/bogie/003 alt-2 or latest and drg.no.1209-01.112-202 alt-nil or latest along with brake gea r arrangement and details for wag9hc loco to clw drg/spec no.1209-01.116-059 alt-5 or latest and 1209- 01.216060 along with pipe line arrangement as per clw drg. no.1209-12.017-032 alt-1 or latest suitable f or brake system in fitted condition [ warranty period: 30 months after the date of delivery ]

Di Pipeline Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors