Latest digimatic indicator Tenders | Government digimatic indicator Tenders

CTN :40458241

05 Jun, 2025 2.35 Lacs

Ramgarh - Jharkhand

Tender For complete overhauling, repairing of 50t cap. asec make electronic road weighbridge by replacement of load cell, load cell mounting, window display, elastomers etc. installed at tapin north ocp under hazaribagh area.

CTN :40376872

29 May, 2025 2.35 Lacs

Ramgarh - Jharkhand

Tender For complete overhauling, repairing of 50t cap. asec make electronic road weighbridge by replacement of load cell, load cell mounting, window display, elastomers etc. installed at tapin north ocp under hazaribagh area.

CTN :40362497

06 Jun, 2025 5.00 Lacs

Tinsukia - Assam

Tender For supply of pad cushion - pad cushioning rubber , cable control engine stop , washer m.s. 10mm id 55mm o.d 6.3mm thk , bolt macine hex head specical , mcb 1 pole 16 amps , socket electrical fixed 6 poles 5 amps 2 , volt meter , electronic avr , ac ammeter 0-50 amps 72x72 mm moving i , display assy lcd

CTN :40362360

13 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of set thickness gauges , shackle , suspension link , set of gaskets , set of gaskets , round seal ring , isolation amplifer (ref no u183) , sealing ring , pilot rod , piston rings , compressing ring , o-ring seal , safety valve , electronic speed governor , o-ring seal , inlet valve cone , outlet valve cone , pressure gauge , delay valve , 3/2 - way solenoid valve , pressure filter , pressure reducing station , set of wear parts , actuator , o-ring seal , sealing ring , main starting valve , complete , o-ring seal , countersunk bolt , cylindrical screw , fuel injection pump , o-ring seal , fuel injection valve , complete , sealing ring , split pin , cylinder lube oil pump , lube oil pump , o-ring , o-ring , o-ring , o-ring , fresh water pump , shaft seal , fuel injection pipe , complete , hose pipe , tft-display exter t100 , seal , lock washeer pair , hexagon bolt , countersunk head screw , lock nut , seal , compressor side , sealing ring , sealing ring , sealing ring , lock washer pair , sealing ring , seal disk , hexagon bolt , lock washer pair , speed transmitter , pressure sprayer complete , sealing ring , o-ring seal , bush , o-ring seal , filter unit em300 , splitter cable for em-300 , time relay 0 , 3-30s , optical coupler , butting ring , bearing bush (ft) , set of wear parts , pressure regulating valve , pressure gauge , temperature sensor , thermocouple , set of seals , buffle screw with pin , seal , o-ring seal , o-ring seal , seal , snap ring (nt) , roller (ft) , bearing bush (ft) , roller bolt (ft) , o-ring seal , sealing ring , spring plate , compression spring , resistence thermometer , thermocouple , compensation line , temperatumre sensor (ft) , temperatumre sensor (ft) , indicator pipe , indicator valve , screwed socket , sealing ring , upper part of casing , lower part of casing , o-ring seal , o-ring seal , o-ring seal , o-ring seal , sealing ring , terminal box , liquid sealer (hb) , loctite 638 , grease paste , lub oil temp controller for eng srl 1130484 model 8l40/60b , charge air temp contro for eng srl 1130483 model 8l40/60b , ht cooling water temp contro eng srl 1130484 model 8l40/60b

CTN :40291044

30 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of v-trim potentiometer , avr ievr 2n , megger (500v) with leather casing digital type , micro ohm meter , regulator avr ievr-2 industrial electronic voltage , a power and control module (avr) , motorised potentiometer , indicating lamps red 110v ac , control card-60vb00350 , vfdc control card 60vb00350 , vfd display card pan-c , vfd power card , 60sa-vb00558 , power card , 60sa-vb00558 , single/paralleri switch , auto manual switch , hrc fuse link - ns 20a , glass catride fuse for 350kw , 500kw alternator , auto manual switch 10a , 240v , 1 pole , de bearing(nu 324) skf , bearing nde , bearing de side for generator -6315c3 , de bearin6319jc3 , single parallel selector switch , set of capacitors(1 set of 6 nos) , diode fuses , rotating rectifier assembly , bearing de side for generator-6316c3 , gcu type ievrnm , avr cards bcd-681r2 control card , control card of avr bcd601 , bcd681r , hrc fuse links-415v ac , 2a ns 2

CTN :40324396

27 May, 2025 NA

Bokaro - Jharkhand

Tender For corrigendum : repairing /replacement of digital make power supply card ,cpu card, display card with junction box for electronic road wb1 and wb3 and supply and installation of gi conduit wiring from load cell to junction box in all wbs installed under akk ocp,bnk

Central Government/Public Sector

CTN :40430640

25 Jun, 2025 NA

Multi City - Multi State

Tender For sbi - online request for proposal for procurement of portable electronic dynamic qr display devices.

Central Government/Public Sector

CTN :40441552

25 Jun, 2025 NA

Multi City - Multi State

Tender For request for proposal for procurement of portable electronic dynamic qr display devices

State Government

CTN :40435240

29 May, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

Central Government And Public Sector

CTN :40330038

18 Jun, 2025 NA

Tinsukia - Assam

Tender For corrigendum : supply of item description:- electronic toe load measuring device as per rdso specification no tm/sm/etlmd/218(fourth revision - 2022 or latest date effect from 01.06.2022). technical data: 1. cap acity of load cell -: 2000k.g, 2. type of load cell -: stainless steel, 3. accuracy -: + 20k.g, 4. operating vol tage -: 5.5v to 5.65v, 5. resolution -: 1.0k.g, 6. display -: 16-character alpha numeric lcd display, 7. sensit ivity -: fast return to zero, 8. calibration -: micro controller based auto calibration. introduction: - electro nic toe load measuring device is an efficient tool in the hands of permanent way engineers to determine t he actual toe load of any elastic rail clip. this unit gives direct reading of the toe load in terms of kilogram s on its alphanumeric lcd display. the whole unit is safe to handle, compact, rugged, and its light weight i s an additional advantage over its mechanical counterpart. the device is provided with a spring loaded ga p sensing device which automatically freezes the required peak value of the toe. a set of link hanger, bala ncing legs, and thrust bearing & tongs is provided for pulling the clip in a uniform and balanced manner. only 4-5 minutes time is required for installation of device on track, measurement of reading and removal o f device from the line. [ warranty period: 12 months after the date of delivery ]

Digimatic Indicator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector