Latest digital button Tenders | Government digital button Tenders

State Government

CTN :42036819

06 Nov, 2025 NA

Chandigarh - Chandigarh

Tender For design, engineering, supply, installation, testing and commissioning of an alert, inform and direct system at six (6) sites - control & monitoring :- the control room shall be set up in the already constructed/available room at the pandoh dam area. this system should include a minimum 43-inch (hd) screen with an adjustable stand, capable of monitoring the operation of the siren station. it should display all feedback, including the status of being on or off, battery health, any faults etc. in the installed equipment. additionally, this system must have the capability to communicate directly with the control room to provide alerts and information in real time., for supply ,testing, designing, erection and commissioning of local station for alert, information and direct system comprising of the following hardware/software: panel/housing with power supply module. the controller, linked with all the control units through a communication and integration unit, displays the system via screens. the sirens should also be remote controlled. the control of the sirens should be according to the commands received from the remote central control station through a two-way gsm/gprs/3g/4g/lte and provision of vsat. security feature including intrusion alarm auxiliary/status control board for contact closure activation and status. the siren system should withstand outdoor environment condition & the siren assembly should be rust proof to withstand harsh and saline environmental condition. single point clicks activation & polling. status monitoring. complete configuration & reprogramming for control site. minimum 15,000 message alert notification through gsm/3g/4g/5g/lte/vsat to bbmb officials/ administrators and local residents according to requirement. programmable hot keys. communication over tcp/ip secure access with password. ethernet cable length :- the bidder shall be responsible for the supply and erection of all cabling required for the complete system, ensuring that the cables are of reputable make only and conform to the prescribed standards as per site requirements. rtu & software :- the r.t.u. and software as per the manufacturer`s design / program, the software should be suitable for controls up to 100+ sirens, the system can be expanded to accommodate changing needs. the software should be app and web based. communication between control centre and sirens. :- gsm/3g/4g/5g/lte network/vsat. pre-recorded voice messages :- live and pre-recorded voice messages in minimum 3 local languages i.e. (hindi, punjabi and english) strobe light :- high intensity led strobe light, color red, amber, green, 60-120 flashes per minute (adjustable), led life > 50000 hrs., pole/top mountable with 360 visibility preferably ip 66. alert tones & voice:- minimum 5 standard alert tones. support transmission of stored voice in siren/voice controller through wave file in memory card, remote activation. remote activation of alert tones and pre-recorded voices the voice messages will be customized, optimized for good quality for the intended location, language preferably in punjabi, hindi & english. warranty period:- 3 years., input power source :- the quantity of solar photovoltaic panels and batteries shall be adequate to meet the systems operational requirements. only reputed manufacturers such as tata solar, vikram, waaree, reil, or equivalent brands shall be supplied. the solar panel input source shall be integrated with the required number of batteries to run the installed system continuously for a minimum duration of three (3) days under idle running conditions. this includes six (6) operational cycles per day, with each cycle lasting a minimum of twenty (20) minutes. a secondary provision for electrical input supply shall be provided to enable system operation in the event of solar panel failure or insufficiency beyond the designed power supply capacity., siren type :- bi-directional electronic siren pre-programmed audio amp

Central Government/Public Sector

CTN :42095012

20 Oct, 2025 NA

Jorhat - Assam

Tender For supply of consumables for construction of hybrid energy device - mild steel sheet, 8ft x 4ft x 1.2 mm, mild steel angle rod, 1.5 inch x 20 ft, mild steel angle rod, 1 inch x 20 ft, mild steel welding rod, diameter: 3.15 mm, mild steel perforated sheet, 8ft x 4ft x 1.2 mm., stainless steel 304 sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 pipe, 1.5 inch dia, 1.5 inch dia, 1.2 mm, 20 ft, zinc alloy door handle lock, stainless steel 304 welding rod, 2.5 mm diameter, ceramic fibre blanket insulation, 24"x12"x1", ceramic fibre rope, 10 mm diameter, 30 m length, heat insulating gasket, 8 ft x 4 ft, 5mm thickness, heat resistant spray paint 225 ml, silicon pipe 1/2 inch inner dia, 10 m, high temperature silicon hose pipe, 2 inch inner dia, 12 feet, worm-drive tubing clamps.chrome steel, hose clamp, 1/2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 1 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 2 inch dia, worm-drive tubing clamps.chrome steel, hose clamp, 3 inch dia, galvanized mild steel set of nut, bolt and washer, 8 mm diameter, 2 inch length, temperature sensor with digital display, k type, 0-1250 с, adruino uno r3 development board, rod heater, 8.2 mm diameter, 12 inch length, quartz furnace observation glass, temperature: 1200 °c, 10 em diameter, 5 mm thickness, copper tube 1/2 inch dia, 23 swg, copper electric wire 6 sq. mm, 90 m, copper electric wire 2.5 sq. mm, 90 m, mcb dp 32 a, electric socket 16 a, electric plug 16 a, combined box 20 a, anabond gasket maker 85 g, heavy load caster swivel diameter: 100 mm, galvanized iron pipe b class diameter: 1.5 inch, length: 40 ft, galvanized iron pipe b class diameter: 1/2 inch, length: 20, galvanized iron pipe b class diameter: 3/4 inch, length: 20 a, stainless steel 304 ball valve diameter: 1.5 inch, stainless steel 304 ball valve diameter: 3/4 inch, stainless steel 304 hall valve diameter: 1/2 inch, check valve, brass diameter: 1.5 inch, check valve, brass diameter: 3/4 inch, check valve, brass diameter: 1/2 inch, metal cutter grinder disc, pack of 10, grit number 220, diameter: 4 inch, grit material: aluminium oxide, metal cutter grinding wheel, pack of 5, grit number 4., diameter: 4 inch, grit material: aluminium oxide, flap disc, pack of 10, grit number 80, diameter: 4 inch, grit material: aluminium oxide, flexible heavy duty 3 layer pvc water pipe, diameter: % inch, length: 30 m, teflon tape for plumbing, pack of 10, 12 mm thick and 10 m length, heat resistant gloves, material: leather, size: 30.48 cm, nitrile disposable hand gloves, pack of 50 pieces, size: l, 150 microfarad capacitor, 230 v, 150 microfarad, 230 v, anti vibration rubber ribbed pads, pack of 4, 150mm x 150mm x 12mm, square pillow block bearing ucf204, 20 mm diameter, inner ball mounted pillow block insert bearing kp08, 8 mim bore, step down transformer, 220v ac to 12-0-12 v.1.5a, single strand wire, diameter 0.51mm,5m, moc3021 moc 3021 optocoupler, bta16-600b triac, 600v 16a, switch. sw-spst, in4007 diode, 100%via, bldc motor with compatible e-bike controller, 48v 900w 3300rpm, lithium-ion battery, a grade 3.2v 2000mah (5c), battery management system, li-ion 135 48v 20a, nickel strip, 0.2 mm thickness, 10 mm width, 5 m length, silicon wire, 12awg, insulation paper, 65mm, glue gun, 40 w, spot welding rod 5000 w, cpu fan 12 v dc, thermoelectric generator (teg), 150°c, module., configuration: sp1848-27145, tungsten rhenium thermocouple, minimum temperature reading: 0°c, maximum temperature reading: between 2300°c and 2871°c, max31856 instrumentation amplifier,, resolution: 0.0078125°c, supply voltage: 3.3v to 5v, arduino uno r3 with adapter cable, miniature circuit breaker fuse, d type, 32 a, power rocker switch, voltage rating: 24 vdc, current, rating: 14 ma, 19mm size red power symbol led s.s. momentary type, push button switch 5v-24v dc, potentiometers 100 kohm, potentiometers 1 m ohm, relay module-(ssr-2 channel), 2 chann

State Government

CTN :42112959

22 Oct, 2025 NA

Multi City - Telangana

Tender For door mounted lcd printer controller/display module for communication of vfd control system for id-fans

CTN :42109771

29 Oct, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of 25bmec001 spares of torision module : : - pot control panel , channel module , display unit bulkhead mounting type , sensor assembly , post master unit facia , pot repeater unit facia , eot control panel , eot master unit vcs type , eot slave unit vcs type , pot master unit vcs type , pot slave unit vcs type , stator assembly , rotor assembly , engine order telegraph et 44 00 , propeller order telegraph pt 44 00

CTN :42091298

14 Oct, 2025 NA

Agra - Uttar Pradesh

Tender For supply of z1 misc-dch-2720569009910950 graphic display heated , z1 misc-dch-2720582700688925 dc/dc converter module uqq-24/4-q12p-c

CTN :42117446

10 Oct, 2025 35.00 Lacs

Chennai - Tamil Nadu

Tender For supply of setting up of cctv surveillance at cantonment market pallavaram : :--4mp ip bullet camera , 2mp ip ptz camera with poe support , 16 channel nvr , 6 tb surveillance grade hdd , 16 port switch , 8 port poe switch , camera box with mounting clamp , 4u outdoor rack , 43 display , 9u rack outdoor preferable , cat 6 cable outdoor cable , 3 core 1.5 sqmm armored cable , 6 core ofc cable , liu 6 port loaded , sfp module , sc lc patch card , liu 12 port loaded , sc sc patch card , sd wan 100 mbps bandwidth , supply and installation of video managment software system vms for upto 50 ip camera , supply and installation of ai box for video analytics applications , supply and installation of fpr license , supply and installation of lpr license , setting up of cctv surveillance at cantonment market pallavaram and establishing network between market and control centre at st thomas mount

CTN :41861615

03 Oct, 2025 NA

Multi City - Multi State

Tender For bid to ras supply of multicopter frames , electronically commutated motors pmsm , motor controller inverter , wireless tuner superheterodyne , stm 32 bit microcontroller board , radio controller , reciever display unit , battery 9000 mah lipo , battery charger , thrust generator blade assembly , ground contact struts , camera 1600 tvl fpv camera , gps module m10 series , extended antennas drone and goggles , hard case drone transport and storage , 2 axis gimbal , payload delivery mechanism , vtx- vrx , servo motor , cells for rc

CTN :41866744

03 Oct, 2025 NA

Almora - Uttarakhand

Tender For bid to ras supply of multicopter frame , electronically commutated motors , motor controller inverter , wireless tuner superheterodyne , stm 32 bit micro controller development board , radio controller , receiver display unit , battery 9000 mah lipo , battery charger , thrust generator blade assembly , ground contact stuts , camera 1600 tvl fpv camera , gps module m10 series , extend antennas drone and googgles , hard case drone transport and storage , 2 axis gimbal , payload delivery mechanism , vtx vrx , servo motor , cells for rc

CTN :41873268

04 Oct, 2025 NA

Almora - Uttarakhand

Tender For corrigendum : supply of multicopter frame , electronically commutated motors pmsm , motor controller invertor , wireless tuner superheterodyne , stm 32 bit microcontroller development board , radio controller , receiver display unit , battery 9000 mah lipo , battery charger , thrust generator blade assembly , ground contract struts , camera 1600 tvl fpv camera , gps module m10 series , extended antennas , hard case , 2 axix gimbal , payload delivery mechanism , vtx vrx , servo motor , cells for rc

CTN :41866745

01 Oct, 2025 NA

Almora - Uttarakhand

Tender For bid to ras supply of multicopter frame , electronically commutated motors , motor controller inverter , wireless tuner superheterodyne , stm 32 bit micro controller development board , radio controller , receiver display unit , battery 9000 mah lipo , battery charger , thrust generator blade assembly , ground contact stuts , camera 1600 tvl fpv camera , gps module m10 series , extend antennas drone and googgles , hard case drone transport and storage , 2 axis gimbal , payload delivery mechanism , vtx vrx , servo motor , cells for rc

Digital Button Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government