Latest digital indicator Tenders | Government digital indicator Tenders

Central Government And Public Sector

CTN :44807756

22 Apr, 2026 NA

Lumding - Assam

Tender For at hji-design, supply, installation, testing and commissioning of a passenger lift of 14 passengers (952 kg) capacity for g+1 floors (approx. 10 m travel), machine : gearless with permanent magnet motor located in the shaft at the top as per rdso specification no:rdso/2013/em/spec/0016 (rev '2'')-2025, complete with all associated electrical, mechanical and civil interface works and accessories, including 1.0 m/s vvvf drive, automatic centre-opening doors (minimum clear opening 700 - 2000 mm), car height 2400mm, finished floor height 2600 mm, pit depth 1600 mm and headroom 5000 mm; equipped with traction machine suitable for 952 kg load with 8-19s fibre-core self-lubricating ropes, guide rails, buffers and complete hoisting/suspension system; microprocessor-based monoblock control panel with closed-loop control, safety torque-off, automatic rescue device (ard), fireman operation, overload protection, emergency alarm/light and all mandatory safety features as per rdso spec; stainless-steel car with led lighting, ventilation fan, handrail, voice announcement system, vandal-resistant cop & lop with digital indicators; including all cabling, earthing, testing, commissioning, statutory clearances and handing over, along with 2 years comprehensive warranty covering all parts, labour and service. cost includes free maintenance of two years during warranty of lift as per rdso spec no.rdso/2013/em/spec/0016 (rev'2') - 2025 make-johnson/otis/schindler/omega elevators /techno industries or equivalent. [ warranty period: 24 months after the date of delivery ]

corporations/Associations/Others

CTN :44697819

16 Apr, 2026 NA

Bacheli - Chhattisgarh

Tender For corrigendum : provision of wheel-wise load detection in the existing electronic in-motion weighbridge (eimwb) syst , testing and stamping of digital indicator above

Central Government/Public Sector

CTN :44820135

21 Apr, 2026 NA

Erode - Tamil Nadu

Tender For corrigendum : supply of magnetic dial stand with digital dial indicator with calibration certificate 1. magnetic stand -high quality, 2. magnetic force-60 kgf, 3. applicable holding stem-8 mm, 4 mm. 4. digital indicator-standard type, 5. range-25.4 mm/1 mm, 0.01 mm/0.0005 mm, 6. button function-on/off, inch/mm, zero, data present, change measuring direction, absolute/incremental measurement, 7. switchable-high/low frequency measurement mode, high frequency mode is suitable for high speed moving of spindle and has large power consumption, low power consumption in lowfrequency mode. 8. keep preset data in memory after restart. 9. data o/p. 10.optional accessories- data o/p cable backs, contact points. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44790423

21 Apr, 2026 NA

Avadi - Tamil Nadu

Tender For supply of welding electrode drying portable oven with digital indicator, 5kg capacity, empty weight 5 kg max, inner dimension 70x70x480 mm3, input 240+_ 10 volt, 50 hz, single phase, 300 watt mini, electrode length suitability 450 mm, thermostat controlled, auto-power cutoff ensures stability at set temperature, temperature range 50- 400 degree c, insulation type - glass wool, nabl/oem calibration certificate shouldbe provided along with material, digital display with temperature controlled . make- fhp, esab, ador, memco or equivalent [ warranty period: 30 months after the date of delivery ]

State Government

CTN :43927260

08 Apr, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments required for upgradation of district food laborartory, karnal - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles", karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard", refrigerated centrifuge (bench top),, bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples.", gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25µm (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25µm),", "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 µl recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water.", ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubing’s, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 µl, 20 µl, 50 µl, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each ofc8 = 250 × 4.6 × 5μm c18 = 250 × 4.6 × 5μmcyano = 250 × 4.6 ×5μm. amino = 250 × 4.6 × 5μmphenyl = 250 × 4.6 ×5μm. silica = 250 × 4.6 × 5μm.all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate.", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate.", ft-ir with atr & liquid cell, "• hydraulic press with kbr die and pellet holder• suitable mortar pestle (dia 5-6 cm)• suitable portable de humidifier to maintain 30- 60% rh• temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab.• ref