Latest digital microwave link Tenders | Government digital microwave link Tenders

CTN :43268360

30 Dec, 2025 NA

Amritsar - Punjab

Tender For supply of thermometer display unit , thermometer cover casing , stethoscope diaphragm , stethoscope tubing , oxime ter dispaly unit , oximeter bty compartment , display assy , control pcb , bp apparatus cover casing , pressure gauge , bp cuff , bp inflation bulb

CTN :43272577

05 Jan, 2026 NA

Jodhpur - Rajasthan

Tender For supply of led data wall size 9x7 ft , control unit , interactive panel 75 inch , projector short throw , visualisar , online ups with power bank , full hd video conf camera , audio system , quad view switch , large format display , installation comissioning with allied accessories

CTN :43274714

30 Dec, 2025 50.0 Thousand

Jaisalmer - Rajasthan

Tender For supply of exhaust fan , fuel pipe , self starter 12v , control display unit , fuel filter primary

State Government

CTN :43032683

31 Dec, 2025 NA

Parganas - West Bengal

Tender For corrigendum : supply of supply installation testing and commissioning of conference system and audio system and integration d d -supply, installation, testing and commissioning of 65 inch interactive panel , supply, installation, testing and commissioning of smart conference camera , supply, installation, testing and commissioning of ops , supply, installation, testing and commissioning of wireless presenter , supply, installation, testing and commissioning of 75 inch interactive panel , supply, installation, testing and commissioning of ptz conference camera , supply, installation, testing and commissioning of microphone and speaker system , supply, installation, testing and commissioning of 86 inch interactive panel , supply, installation, testing and commissioning of delegate unit , supply, installation, testing and commissioning of chairman unit , supply, installation, testing and commissioning of control unit , supply, installation, testing and commissioning of speaker unit , supply, installation, testing and commissioning of foh amplifiers unit , supply, installation, testing and commissioning of foh speaker unit , supply, installation, testing and commissioning of speakers amplifier unit , supply, installation, testing and commissioning of microphone unit , supply, installation, testing and commissioning of audio input output unit , supply, installation, testing and commissioning of display unit , supply, installation, testing and commissioning of sound dampening and acoustc materials unit

Central Government/Public Sector

CTN :42998011

29 Dec, 2025 NA

Ranchi - Jharkhand

Tender For corrigendum : supply of interactive panel 105 inch , video conference system , wireless micro phone speaker , speaker , 4 channel class d amplifier , hdmi cables , 8 port poe switch , dual band wireless access point , wireless delegate unit with microphone selection button , rechargeable battery pack , battery charger , wireless control unit , hdmi amplifier , 10 port hdmi distributor , 65 inch display with camera and micro phone speaker , display 75 inch , hdmi extender

Central Government/Public Sector

CTN :42953489

29 Dec, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of lube oil filter for 500kva cummins dg - lube oil filter for 500kva cummins dg, oil bypass filter 500kva cummins dg, separator fuel water 500kva cummnis dg, element crn resistor 500kva cummins dg, foil sealed teststrips 500kvacummins dg, coolant additive concentrate 500kva dg, element air cleaner 500kva cummins dg, element air cleaner 500kva cummins dg, valvoline premium blue 7600 engine oil, 12v 100ah genset vrla batteries, battery charger 24v 10a, hmi display control unit

CTN :43185676

05 Jan, 2026 NA

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer- the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks.warranty must be one year., electronic balance- the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. warranty must be one year., vaccum pump - the pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted withvacuum and filter cartridge., hot air oven- the inner chamber should be made of stainlesssteel and the outer chamber should be m.s powdercoated. the maximum capacity of the oven shouldbe 100 ml or more. the operational temperatureshould be between ambient to 250oc or more witha temperature accuracy of 1o c. pid based digitaltemperature control., double distillation unit- the unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil bath- the oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240oc (0.1oc increment) with a temperature stability of 1oc, water bath- the water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars., ph/ condutivity meter - operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range shouldbe in between 0.00 to 29.99 s/cm, uv cabinet- operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometer- application: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca 2+ :0-99.9 ppmli 2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required

CTN :43068971

24 Dec, 2025 6.66 Lacs

Sumbal - Jammu And Kashmir

Tender For corrigendum : replacement of damaged display unit (control gp-e) with allied accessories of soya ii dredger located at hajin bandipora of flood mechanical division baramulla under maintenance of dredging machinery and all allied equipment / accessories.

Central Government/Public Sector

CTN :43122436

24 Dec, 2025 NA

Raigarh - Chhattisgarh

Tender For corrigendum : procurement of cems spares for ntpc lara - condensate monitor,7143135024002,buhler, flow rotameter,0-100lph,purge,glass, no2-no converter,6084253,sick,s710, sample gas cooler,6085387,sick,s710, repair kit, sampling pump-3n,knf, peristaltic pump,6084789,sick,s710, sample pump,6086897,sick,s710, tube,5348665,sick,s710, heated sample probe,6085386,sick,s710, cell,2028602,100mm,sick,sox nox analyzer, chopper,2028465,sick,sox nox analyzer, display with pcb,2032796,sick, synchronous motor,6026930,sick, set fuses series,2028493,sick, absorption cartridge,2036567,sick,s710, absorption container,2051024,sick,s710, natrium hydroxide,2129633,sick,s710, activated carbon,2077707,sick,s710, fi64 dust filter,2051029,sick,s710, ring heater,6084311,sick,s710, heating plate pcb, sick, 2042787, filter insert,5348235,sick,gm901/dht 50, blower assy,1137015,sick,gm901/dht 50, housing&shutter,1657147,co analyzer assy, blwr fltr elem-crtg,1655874,sick,dt 50, processor board,2055383,sick,dt 50, reflector unit-dht-r52,1040169,sick, control unit,mcu-n,sick

CTN :43225953

07 Jan, 2026 5.00 Lacs

Panaji - Goa

Tender For supply installation and commissioning of lab. equipment for civil engg dept - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity including accessories and toolkitspecification:-1. machine capacity required : - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity. digital compression testing machine shall confirm is 516 and is 14858. digital compression testing machine for testing concrete cubes of size 100mm, 150mm, 200mm ,300mm and concrete cylinder specimen up to 300mm diameter and 300mm height . also the cement mortar cubes of 70.7 mm size and 50mm size. 2. loading frame:- steel welded loading frame with top cross head base and solid side walls. hydraulic piston is fixed to the base and platens are hardened, ground and polished. the upper and lower plate should be marked with the guidelines on the lower plate to keep the specimen co-axially with hydraulic jack. the machine should be provided with suitable side spacers as standard to accommodate the variety of sizes of specimens as indicated above. the two speed pump to allow fast approach of platens for daylight closure and also to allow precise control over load application using control lever and valves.3. digital display:- display shall show force and stress values in si units. the electronic control unit shall be based on suitable processor with a built in interface for laptop and computers. the processor speed shall be such that the online load deformation curve on full screen is smooth.4. the storage capacity to record and store 2000 complete test results with the facility of printing results/logged data through built in parallel port. least count of 0.1 kn.5. automatic controls for switch off on overload or over travel or specimen break or manual termination.6. power supply :- suitable for operation on 220v/230v single phase 50hz ac supply 7. additional requirements maximum clearance between plate 400mm. maximum distance between side platen 400 mm platen size 320mm square.8. flexure attachment:- flexure testing machine of 10 tons ( 100kn) capacity confirming to is 516. loading to be applied by the downward movement of piston. machine shall be suitable to test beams of 100x100x500 mm and 150x150x700mm.machine shall be supplied with suitable standard spacers for testing different sizes of beams.9. additional requirement for flexural test: three point loading light weight rugged high strength frame.least count 0.1 kndistance between supporting rollers: - 600mm for 150x150 x700 mm beam and 400mm for 100x100x500 mm beamdistance between loading rollers 200mm for 150x150x700mm beam 133 mm for 100 x 100 x500 mm beam power supply suitable for operation 220v 50hz single phase.10. the machine should be supplied with accurate toolkit11. compatible software should be included

Digital Microwave Link Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector