Latest digital tong tester Tenders | Government digital tong tester Tenders

State Government

CTN :38558437

30 Dec, 2024 29.25 Lacs

Tirupati - Andhra Pradesh

Tender For procurement of digital clamp meter(digital tong tester)

CTN :38518900

30 Dec, 2024 NA

Vadodara - Gujarat

Tender For supply of excavation in trenches not exceeding 1 point 5 meter wide and not exc 1 point 5 meter dep and getting out in dense soil , returing comma filling in trenches including spreading comma leveling comma watering and well ramming in layers , removing excavated material not exceeding 50 m and depositing where directed as a level , material and labour for sand filling with clean dry find sand unwashed including gentlry punning around cables in trenches , supplying and laying unreinforced pre cast flat concrete cable protection cover of class hv type 1 comma type size 300 mm , supplying and laying xlpe insulated comma screened comma pvc bedded comma galvanised steel strip or wire armoured , supply comma jointing and testing cable jointing kit of 11 kv grade cable for outdoor termination comma heat shrink type complete with jointing , supply and fix cable jointing kit for 11 kv earthed grade cable for straight through head shrink type joint complete with jointing materials and accessoried suitable for 3 core

CTN :38508599

18 Dec, 2024 2.34 Lacs

Srinagar - Jammu And Kashmir

Tender For s/i of additional safety items for krishi radio station at main campus shalimar, skuast-k.(capex) - fire detection & alarm system, supplying, installation, testing & commissioning sector control panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per is:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required., 4 zone, supplying, installation, testing & commissioning of heat detector each operating at 54 c/57 c with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required., supplying, installation, testing & commissioning of smoke detector each with builtin led and mounting base complete with all connections etc. as required., supplying, installation, testing & commissioning of manual call each boxes of ms construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as recuired, supplying, installation, testing & commissioning response indicator each on surface/recess ms box having two leds metallic cover complete with all connections etc. as required., supplying, installation, testing & commissioning fire alarm sounder each with facility to make announcement, mounted in a.b.s. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required., supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with p.t.t. knob & speaker/microphone enclosed in a m.s.(16 swg)/ abs box with break glass in front etc. complete as required., supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000v rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable ethylene propylene rubber (epr) insulation and lszh inner bedding, steel wire armouring & lszh outer sheath complete as required., supplying and fixing of co2 type fire extinguisher isi marked confirming to is: 15683 capacity 4.5 kg complete with delivery hose horn, squeeze grip release valve , locking arrangement, operation manual, bracket with two screw and sleeve including transportation cartage upto various post in kashmir region of sib as per anexure attached etc complete as required. (make : life guard/minimax/safeguard), providing and fixing abc type (dry power type ) extinguisher as per is: 15683 consisting of welded ms cylindrical body, with discharge hose, discharge valve, suspension bracket, initial filling, pressure gauge including transportation cartage upto various post in kashmir region of sib as per anexureattached.etc complete as required. (make : life guard/minimax/safeguard), capacity 6 kg., fabrication, supply, installation, testing & commissioning of indoor type compartmentalized feeder pillar having front area not less than 0.60 sqmtr (900 mm x 900 mm) and depth 45 cm (ns) made out of 2mm thick crca sheet with tappered roof having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 400 amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor pvc insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd.details as under panel powder coated 2.0mm mccb 160 a 4p 50ka , ther

Central Government/Public Sector

CTN :38307304

24 Dec, 2024 NA

Sonitpur - Assam

Tender For corrigendum : supply of 24 port layer switch - l3 distribution switch , 24 port gigabit switch , network access control for 100 users , network management software for centralized management , server for nms with intel xeon processor and 32gb ecc ram , 55 inch display for network management software , workstation for nms monitoring , 10g sfp single mode sfp transceiver module , 12 core single mode armoured optical fibre cable , 24 port fully loaded liu with standard accessories , 3 mtr. single mode sc-lc ofc patch cord , 9u 600 x 600 rack with standard accessories , 50mm hdpe for laying of ofc , 50mm gi conduit for laying of ofc , 50mm pvc conduit for indoor laying of cables , digging and refilling of hard and soft soil, concrete, bricks etc as required and making good the same as per site condition, 60 mtr , laying of high density polyethylene pipe underground as required and making good the same as per site condition, 100 mtr , laying of gi conduit underground as required and making good the same as per site condition, 20 mtr , laying , fixing of pvc conduit onor above of false ceiling or fixing on the wall including fixing of suitable saddle, screws etc. as required as per site conditions, 600 mtr , laying of optical fibre cable through hdpe, pvc conduit, gi conduit complete as required, 700 mtr , splicing of optical fibre cable complete as required, 240 nos , mounting and fixing of liu complete as required, 10 nos , mounting, fixing and dressing of wall mount rack complete as required, 9 nos , mounting, fixing, installation and configuration of all types of server and workstation complete as required, 2 nos , mounting, fixing, installation and configuration of all types of switches complete as required, 22 nos , installation and configuration of network access control as required, 1 no , installation and configuration of network management software as required, 1 no , testing, commissioning, certification, providing 3 sets of completion diagram, documentation of entire project and training to users with 5 year service warranty complete as required, bid details/ 2 / 29

Central Government/Public Sector

CTN :38494427

30 Dec, 2024 NA

Solapur - Maharashtra

Tender For 1)civil work for-civil work for rationalization of process layout along with relocation of machines for wheel shop2)civil work for-civil work for augmentation wheel set attention and handling facilities.3)civil work for-civil work for transfer and testing line along with associated workshop for wagon receipt, testing and dispatch.4)civil work for-improvement of facilities on painting line.5)civil work for-development of ctrb unit exchange/sub assembly section and work station adjacent to wagon body repairs shop.6)civil work for-upgradation of material store at sse/p-way/south kurduwadi office and repairs to concrete road at sse/w/bg kurduwadi office.

Central Government/Public Sector

CTN :38456986

26 Dec, 2024 40.00 Lacs

Kangra - Himachal Pradesh

Tender For repair/ replacement of lt underground cables and connected items in various locations at mil stn yol - excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., excavation in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cms thick in any type of soil complete all as specified and directed., removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed., pcc 1:3:6 (nominal mix) type c-2 (using 40mm graded crushed stone aggregates) as in coping of pole including necessary form work complete all as specified and directed., pcc 1:4:8 (nominal mix) type d-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed., sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cms thick, complete all as specified and directed note: punned thickness shall be measured., sub class b brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick including taking out old bricks, complete all as specified and directed., laying only bricks along the length of cable on sand cushioning, with width equal to the length of the brick , complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 80mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 50mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., dismantling poles/struts, any size and type including insulators and removing from site, complete all as specified., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 300 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 240 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 185 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe i

CTN :38487351

23 Dec, 2024 NA

Multi City - Multi State

Tender For supply, erection, testing and commissioning of 68 m3/hr (15000 gph uk) or higher capacity vt pump set with 15 hp (or higher capacity) motor with rating 415v, 50hz, 3 phase along with starter , pump set specifications shall conform to pcee/grc's latest specification and as per site requirement annexure by consignee of make: wpil, crompton greaves, ksb, kirloskar or similar . the cost is inclusive the cost is inclusive of dismantling, making concrete foundation work, supply of suitable size foundation bolts and all requisite materials.

CTN :38363368

18 Dec, 2024 NA

Mumbai - Maharashtra

Tender For sitc of various essential equipments for the use of various municipal maternity homes - 200/250 amp. 415v tpn switchfuse unit with crca sheet steel powder coated enclosure with hrc fuses & switch links and padlockable arrangement., cable end boxes 200/250 amp. tpn switch fuse, 200 amp. 415v fp on load changeover switch with crca sheet steel powder coated enclosure., supply, installation, testing and commissioning of 50kva dg set comprising of cpcb iv mech, built in amf panel, 1500 rpm, 4 stroke, 3 cylinder inline type, water cooled with radiator diesel, 1st category al armoured cables frls outer sheathed- 3.5c x 95 sq.mm, cable end termination for aluminium cables 3.5c x 95 sq.mm, 3 noss. single core cu pvc insulated flexible cable of 50 sq.mm. for phases & 1 single core cu pvc insulated flexible cable for neutral of 25 sq.mm for 100/125 amp. tpnss switch., cement concrete foundation using m-20 cement concrete mix with j shaped foundation bolts where required, supply & laying of double wall corrugated ( dwc) pipe 125 mm od / 109 mm i.d., concrate excavating the trenches and refilling the same after the cable is laid in approved manner (size of trench: 750 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 cu. mtr. = 2.2 rmt., soil excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner (750 mm deep, 600 mm wide),in all types of soils 1 cu. mtr. = 2.2 rmt., providing, detailing, composite fabricating members like trusses, ngirders,girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using m.s. hollow tubular steel, bare galvalume/zincalume sheets for roofing, earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate, 25 x 3mm gi, bare g. i. conductor size 10 swg., removal of switchgears/ dbs upto 200 amp., removal of switchgears/ dbs above 200 amp to 400 amp., removal of busbar chamber above 100 amp tpn to 800 amp tpn., removal of cable above 3-1/2 core x 35 sq. mm. to 3-1/2 core x 70 sq. mm, removal of cable from 1.5 sq.mm to 3-1/2 core x 35 sq.mm., refixing of 2 core/ 3 core/ 3-1/2 core / 4 core/ 6 core copper / aluminium conductor armoured / unarmoured cable 1.5 sq.mm. to 16 sq.mm. size on wall / ceiling etc., refixing of 2 core / 3 core / 3-1/2 core / 4 core/ 6 core copper / aluminium conductor armoured / unarmoured cable above 16 sq.mm. to 150 sq.mm. size on wall / ceiling etc., 415v main distribution panel 1 short circuit reating 50ka for 1 sec. 400a (thermal magnetic overload, short circuit release) mccb with rotary operating mechanism as incomer with digital ammeter,, 200a 4p mccb, 100a tpn mccb, 3 noss. single core cu pvc insulated flexible cable of 95 sq.mm. for phases & 1 single core cu pvc insulated flexible cable for neutral of 50 sq.mm for 200 amp tpnss switch., g.i. cable tray with all other accessories 150 x 25mm (w x h) - (16 swg - 1.6mm) without cover, cable end termination for aluminium cables 3.5c x 50 sq.mm, cable end termination for aluminium cables 3.5c x 120 sq.mm, cable end termination for aluminium cables 3.5c x 70 sq.mm, cable end termination for aluminium cables 3.5c x 50 sq.mm, 20w led flood light luminaire ip65, 1st category al armoured cables frls outer sheathed- 2c x 6.0 sq.mm, gun metal gate valves (screwed):-50 mm dia., gun metal non - return valve: (screwed):-50 mm dia., gun metal gate valves (screwed):-15 mm dia., gun metal foot valve 50 mm dia., automatic pump control panel, hose oil cooler to water pump, worm drive hose, fuel supply pipe, injector overflow pipe (return pipe), hose for oil cooler inlet, hose clip thermostat, vent hose (epdm) for gens, ax-45-cogged belt, hose water manifold to ther, dse 6120/ 4520 controller, battery exide 12v 110ah, oil filter 4 cyl -, fuel filter 4 cyl -, air filter element outer 4 cly m&m, centrifugal oil filter 4c, radiator aluminium, radiator exhaust fan, radiator core, charging alternator, alternator winding main, alternator ar

State Government

CTN :38413198

23 Dec, 2024 24.89 Lacs

Doda - Jammu And Kashmir

Tender For non destructive testing of concrete in plunge pool and other locations of dam body to confirm the healthiness by way of underwater inspection by way of ground penetration radar, electric resistivity imaging along with hydrography.

State Government

CTN :38430969

24 Dec, 2024 NA

Sirmour - Himachal Pradesh

Tender For enquiry for conducting visual inspection and ndt (non destructive test) on concrete foundation of t.g. unit 3 and testing the depth of foundation bolts including rebound test of unit 3 at sirmour.

Digital Tong Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government