Latest digital trainer kit Tenders | Government digital trainer kit Tenders

CTN :39384254

28 Mar, 2025 NA

Meerut - Uttar Pradesh

Tender For bid to ras supply of anpr camera ip ir 5mp 80 mtrs ai enabled , ptz camera ip ir 5mp 200 mtrs with 33x optical zoom ai enabled , bullet veri focal camera ip ir 5mp 50 mtrs ai enabled , bullet fixed camera ip ir 5mp 30 mtrs ai enabled , sre pole with erection installation of equipment , out door rack with liu ofc termination electrical devices fan other accessories , mounting bracket 3 way , 4 port poe with sfp network switch industrial grade , 24 core armored ofc cable , hdpe duct 30mm , hdd , blowing of ofc , laying of hdpe duct , pre casted chamber , 75 inch large format display , 64 channel 8 sata nvr , 8tb surveillance hdd , optical switch 10 plus 2 ports , 24 port gigabit switch , three kva online ups with two hrs backup minimum , sfp module giga 25 kms , warranty period of one year

Central Government/Public Sector

CTN :39335087

08 Apr, 2025 NA

Goa - Goa

Tender For corrigendum : supply of md hp breathing air compressor 9 cfm , air dryer , combined started or control panel , gauge assembly board with suction and discharge pressure gauge pipes isolation cocks etc. , loose fittings and instrumentation as applicable , shock mounts with center and side holding down fasteners , flexible pipes bellows for all equipment interface with external loose supplied system , electrical items for connectorisation termination that lugs gland etc , first submission of binding drawing , documentation hard copy , documentation soft copy , ietm documentation , service of service engineer for stw commissioning trail cst etc 10 mandays in 2 sorties per eqpt , service of service engineer for electrical work pre checks cable connection instrumentation etc 1 mandays in 1 sorties per eqpt , preservation and de preservatives , commissioning spares , onboard spares , standard and special tools , training and training material

CTN :39708809

01 Apr, 2025 1.54 Crore

Mysore - Karnataka

Tender For package-3 supply, installation, commissioning, testing, training and maintenance of instrumentation of taraka dam in mysore district of karnataka state under drip-ii -world bank aided. - automatic water level recorder, weather station, uplift pressure measurement system, jelly filled cable, cable termination and switch box, spvc cable, laying of armoured jelly filled cable, providing and installing of digital readout unit, providing and installing of data collection unit and transmission system server, settlement plate/survey markers, data collection unit and transmission equipment, providing and installing of electronic sirens, providing installation and commissioning of tilt meters, vibrating wire piezometer/pore pressure meter, drilling of 1 mts bore holes, pair armored jelly filled cable of standard, cable termination and switch box-2, laying of armoured jelly filled cable-2, pvc pipe, v noutch, slope stability analysis, masw test to estimate dynamic soil constant, installation charges, installation charges for drainage gallery instrumentation, total station, amc

Central Government And Public Sector

CTN :39382058

26 Mar, 2025 53.71 Lacs

Multi City - Gujarat

Tender For corrigendum : removing, shifting and re-erection the electrical substation equipments from 6th berth s s to proposed location thereof inside cargo jetty area - removing & shifting of the following equipments as per tech spec. no:-1, 500 kva distributions transformer., rmu of 12 kv, 630 amps 21 ka outdoor mounted rmu unit., lt panel ( way-15), re-erection, testing & commissioning of the following equipments as per tech. spec. no. 2, 500 kva distributions transformer., rmu of 12 kv, 630 amps 21 ka outdoor mounted rmu unit, supply at site 3 core armoured ht aluminium conductor xlpe cable of 11 kv grade, following rating of the as per technical specification no. 3 a). 3c x 150. sq. mm., supply at site 4 core armoured lt aluminium conductor xlpe cable of 1.1 kv grade, following rating of the as per technical specification no. 4 a) 3.5c x 300 sq. mm., supply, installation testing & commissioning at site of following 11-way lt load point panel (as per proven design) as per technical specification no. 511 ways {2 i/c, i changeover (bus coupler), 8 o/g}., laying ht/lt armoured aluminium conductor cable 3.5/4 core up to 35 sq. mm. to 150 sq. mm. as per technical specification no. 6, through hdd, with hdpe heavy duty pipe., in existing rcc trench, hard & soft soil, supply at site following way lt distribution panel (as per proven design) as per technical specification no. 715 ways (2 i/c, 1 bus coupler, 12 o/g)., installation, testing & commissioning of lt distribution panel as per technical specification no. 8, providing & connecting following type of earth wire from earth station to equipment as per requirement as per tech. spec. no. 9, 25 x 3 mm. copper strip, 25 x 3 mm. hot dip gi strip., 8 swg gi earthing wire, supply & preparation of earthing station, tfc, chemical treated back filled compound earthing system as per technical specification no. 10a) pipe-in-pipe 50-60 mm. dia. gi type 3 mtr. depth, for transformer body earth, maintenance free, supply of 3 phase 500 kva 11/0.433 kv indoor type distribution transformer as per technical specification no. 11, installation, testing & commissioning of 500 kva 11/0.433 kv indoor type distribution transformer as per technical specification no. 12, supply of tpn double door ip 42 db 4 ways distribution board as per technical specification no. 13, fixing of tpn double door ip 42 db 4 ways distribution board as per technical specification no. 14, supply of following type of mcb as per technical specification no. 15, 40a tpn mcb with 10ka breaking capacity, 32a sp mcb with 10ka breaking capacity, fixing of tpn/sp mcbs with 10 ka breaking capacity as per technical specification no. 16, providing & fixing of surface wiring with 2 x 2.5 sq. mm. copper conductor with pvc insulated (single phase and neutral) for single phase sub-circuit from the db/mcbs to the switch board as per technical specification no. 17, providing and fixing surface wiring with 1.5 sq. mm. copper conductor for light /tube point with pvc insulated single core standard copper conductor wire as per technical specification no. 17, providing and fixing surface wiring for 20a & 10a, 240 volt, 50hz power point as per technical specification no. 19, supply & installation of surface mounted 20 watt led tube light luminary complete with batten as per technical specification no. 20, supply at site 300mm sweep exhaust fan as per technical specification no. 21, fixing of 300mm sweep exhaust fan as per technical specification no. 22, supply of heat shrink straight through joint kit for 11kv, 3c x 150 sq.mm h.t xlpe cable as per technical specification no. 23, fixing the heat shrink straight through joint kit for 11kv 3c x 150 sq.mm h.t xlpe cable as per technical specification no.24, supply of heat shrink long sleeve & boat, suitable for rmu end termination kit (indoor type) for 11kv 3c x 150 sq.mm h.t xlpe cable as per technical specification no. 25, fixing of heat shrink long sleeve & b

Central Government/Public Sector

CTN :39316016

11 Apr, 2025 NA

Kota - Rajasthan

Tender For corrigendum : survey, design, supply, installation, testing and commissioning of trackside kavach equipment at stations/lc gates locations including erection of towers and associated works required for kavach in kota-ruthiyai section and sogaria-kota "c" section (166 rkm) of kota division of west central railway. this also includes supply, trenching, duct laying, blowing, splicing, termination, etc. of 24 & 48 fiber optical fiber cable with route diversity wherever required.

corporations/Associations/Others

CTN :39651650

01 Apr, 2025 1.74 Crore

Parganas - West Bengal

Tender For supply of sitc of 320 kva of dg set as per boq , itc including transportation loading unloading of dg set and amf panel as per boq , supply and laying 3 and half core 240 sq mm 1 point 1 kv xlpe armour cable as per boq , lum sum costing for civil work for making foundation of dg set as per boq , supply and fixing of rubber mat as per boq , bricks work as per boq , supply and fixing sheet metal as per boq 4 bar 415 v 315 amp rating 4 x 50x10mm 500 x 150 mm as per boq , providing and fixing following rating and breaking capacity 630 a 35 ka tpmccb as per boq , laying of 1no additional pvc insulated and pvc sheathed xlpe power cable of 1.1kv above 185 sq mm and up-to 400 sq. mm as per boq , laying of 1no pvc insulated and pvc sheathed xlpe power cable of 1 point 1kv in the existing machinary open duct wall above 185 sq mm and up-to 400 sq mm as per boq , supplying and making end termination with brass compression gland and aluminium lugs 3 and half core 240 sq mm 70 mm as per boq , supplying and making straight through joint with heat shrinkable kit 3 and half core 240 sq mm as per boq , providing and fixing mv danger notice plate of 200 mm x 150 mm as per boq , providing laying and fixing of following dia gi pipe medium class 100 mm as per boq , earthing with gi pipe 4 and half mt 40 mm dia incl accessories and providing masonry encl with cover plate having locking arrangement and watering pipe with coal and salt as required as per boq , providing and fixing 25mm 5mm gi strip in ground below half below including connections etc as required equipment earth grid as per boq

Central Government / Public Sector

CTN :39671177

26 Mar, 2025 NA

Kamrup - Assam

Tender For custom bid for services - inst shutdown jobs for tps dmp for 2 years at gr tender no 9010c25g44-1.skilled & unskilled jobs at tps & dm plant of guwahati refinery include all works that are to be carried out as per the instructions of the engineer-in-charge / site-in-charge during m&i shutdown. 2.electricians shall be responsible for field and control room wiring/cabling, termination, cable glanding, lugging, ferruling etc. as per the direction of engineer -in-charge. 3.fitters shall be responsible for tubing (ss tube, cu tube), cabling, cable tray laying, jb installation etc. 4.welders shall be responsible for fabrication jobs (impulse piping, support modification, cable route modification jobs, new installations of transmitters / valves etc. 5.helpers shall be required for rigging assistance to carry out all transportation, material handling & cleaning jobs and to assist electricians, fitters & welders to execute all instrument related jobs. 6.during the execution of the work, if the contractor is found lacking in skill/ experience/ mobilization, the contract will be forthwith discontinued. 7.iocl will not provide any extra cost for site supervisor. bidder to consider the same during price bid quotation. b. shutdown specific scope of work: 1. cable laying of different instrument cables multi-pair and single pair (signal / power / control / alarm / thermocouple / rtd / fo etc.) of different sizes and types (armoured/unarmoured) in existing cable trenches including routing through mct blocks. scope of splicing of fo cable is in vendor scope. 2.cable testing and transportation from stores to site, unpacking, straightening, dressing of cable & returning the empty drums with unused cable, if any to stores. 3.glanding & termination of signal/control/triad/t/c and power cables with double compression type ss cable glands. 4.cable termination at device end, junction box end and marshalling end shall be carried out under the supervision of m/s iocl. 5.loading, unloading and shifting of material from store / fire & safety etc. to site in all the sections of guwahati refinery. 6.dismantling and installation of misc. instruments, junction box, cables, cable glands, cable trays etc. under the supervision of m/s iocl. 7.laying and fabrication of ss / cu tubes as directed by site engineer. 8.dismantling and installation of control valves / on-off valves / their accessories / positioner mounting / air filter regulator cleaning / replacement etc. shall be carried out under the supervision of m/s iocl. 9. bidder is solely responsible for execution of each work executed by him / by his worker. for any nonstandard execution of the performed job , eic/sic may asked to repeat the job for correction purpose without paying any extra amount. 10.heavy equipment (i.e. tractor trailer & hydra) required for dismantling, transportation & installation of valves/equipments shall be in scope of contractor.

Digital Trainer Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector