Get complete information related to latest Digital Voltmeter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Digital Voltmeter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Digital Voltmeter Tenders.
Tender For supply of digital multi meter of 4 3/4 digits 31000 counts measuring dc voltage 300 mv to 1000v, ac voltage 300mv to 1000v, dc current 300 micro amps to 10,000 amps, ac current 300 micro amps to 10,000amps. resistance 300 ohms to 30 mega ohms, diode continuity, event counter, stop watch, db measurement, capacitance of 3.0 nano farads to 10000 micro farads, frequency measurement 300hz to 100 khz, temperature measurement pt100 to pt 1000, the meter should be supplied with valid calibration certificate. one probe set, spare fuse battery, user manual including all accessories, the complete meter should be similar to rish multi 18s of rishab, make: rishab, fluke, motwane, megger.
Tender For supply of various conveyor sections and spare for conveyor system - supply of various conveyor sections, 1. conveyor section for centrally located drive: the conveyor section shall be used for centrally located drive units. total length of the section shall be 2 meter. the conveyor section shall have all the necessary items and ready to replace the existing section. vendors scope of supply includes, conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, railing cum leg supports, railing angles, whmwpe wear pads fitted on the track, pillow block mounting, gear box mounting frame, idler shaft, idler sprockets, counter weights, soap solution tray, gaskets, anchor fasteners, m10 mounting bolt & nuts including chain complete in all respects including painting., conveyor track for straight section: this shall be used for existing straight conveyor section to replace the damaged conveyor tracks. 2.5 meter conveyor tracks (top and bottom) assembled with flanges, fitted with wear pads., common tail end: this common tail end should be combined type and total length of the section shall be 1.5 meter. the section shall have all the necessary items and ready to replace the existing section. vendor s scope of supply includes, common tail end conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, railing cum leg supports, railing angles, whmwpe wear pads fitted on the track, idler shaft, idler sprockets, soap solution tray, gaskets, anchor fasteners, m10 mounting bolt & nuts including chain complete in all respects including painting., straight conveyor section: this is standard 2.5 meter straight conveyor section complete in all respects. the straight conveyor section shall have all the necessary items and ready to replace the existing section. vendors scope of supply includes, conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, railing cum leg supports, railing angles, whmwpe wear pads fitted on the track, gaskets, anchor fasteners, m10 mounting bolt & nuts including chain complete in all respects including painting., divertors for t sections along with pneumatic cylinder and all the necessary fittings complete in all respect, twin arm stopper assembly. complete in all respects including pneumatic cylinders, rollers, all the necessary mountings, supporting legs and painting., uhmwpe wear pad for 90 degree bend section. side mounting wear pad for protection from chain slippage from the bend., uhmwpe wear pad for 90 degree bend section. wear pad for mounting on conveyor track of the 90 degree bend section., m10 x 35mm bolt nut washer set, counter weight set (left and right sided) along with mounting handle to be used for centrally located drive sections., skf bearing for drive units drive shaft with 65mm dia. model: yar - 213 - 2f, pneumatic pusher set. to be used for rejection line to push the cylinders from main line, complete in all respect including 50mm dia, stroke 400mm pneumatic cylinder, guide rod, pusher pad, all the necessary fittings, mounting plate and leg supports., freight and packing & forwarding charges, gst @ 18% for total amount of supply + freight charges
Tender For set of digitalvoltmeter & ammeter for electrical panel of lhb economy ac coaches conforming to rdso spec. no. rdso/pe/s pec/ac/0200-2020 (rev. 0) or latest one set consist of 1) digital ammeter with led display, size 96 sq.mm, multiline for measuring input cu rrent r, y & b, 0-600 a, ct -1a/5a, programmable, with auxiliary supply 24/110 vdc, 4va, class 1.0. - qty. 01 no. make - scheinder, soc omec, ae,yokins, rishabh, siemens 2) digitalvoltmeter with led display size 96 sq. mm, multiline for measuring ry, yb & br, input volta ge 800 v ac l-l, with auxiliary 24/110v dc, 4va, class - 1.0 - qty. 01 no. make - l&t, ae,yokins, rishabh , muller+zeigler confirming t o spec no. rdso/pe/spec/tl/0195-2019(rev 0) or rcf spec no. edts-103 rev.d, amnd-7 or latest. make:- voltmeter similar to yokins part n o.y-9-3v3 or rishabh part no.rish-delta3v, ammeter similar to yokins part no.y-9-3a3 or rishabh part no.rish-delta3a. note-supplier shoul d submit oem test certificate along with meter. [ warranty period: 30 months after the date of delivery ]
Tender For running contract for supply, installation, testing and commissioning of high availability single section digital axle counter (hassdac) as per specification and detailed description provided b elow: - 1. high availability single section digital axle counter, phase-reversal type, complete set, havin g the 2dp-1sr configuration, as per rdso specification no. rdso/spn/177/2012 (ver.3) with the latest amendment and having the latest software, at the time of supply. 2.detail description of hassdac: - i. high availability single section digital axle counter (hassdac) phase reversal system with vr/pr box i ncluding relays, clamp with deflector plates and hardware, reset box having the auto-reset facility, dua l set of track sensor devices (tx coil/rx coil) for one track section suitable for 52kg & 60kg rails and all surge voltage protection and filter cards ii. all track sensors device (tx coil/rx coil) should be base cla mp type having 15-meter cable length. [ warranty period: 30 months after the date of delivery ]
Tender For supply of 1. digital multi meter of 4 3/4 digits 31000 counts measuring dc voltage 300 mv to 1000v, ac voltage 300mv to 1000v, dc current 300 micro amps to 10,000 amps, ac current 300 micro a mps to 10,000amps. resistance 300 ohms to 30 mega ohms, diode continuity, event counter, stop watch, db measurement, capacitance of 3.0 nano farads to 10000 micro farads, frequency measurement 300hz t o 100 khz, temperature measurement pt100 to pt 1000, the meter should be supplied with valid calibratio n certificate. one probe set, spare fuse battery, user manual including all accessories, the complete meter should be similar to rish multi 18s of rishab, make: rishab, fluke, motwane, megger. [ warranty perio d: 30 months after the date of delivery ]
Tender For bid to ras supply of plumbing and sanitary items - supply of over head tank 1000 liter capcity, supply of felxible stainless steel one inch dia, 2 meter long hose pipe with threaded on both side, supply of 6v sensor tap spare parts of solenoid valve for basin mixer aquis code: -zsn-chr-017, supply of 9v sensor tap spare parts of eye sensotronic - wb-51001/27/21-08002267 (code:- zsn-chr-089), supply of 9v sensor tap spare parts of solenoid valve for basin mixer aquis, supply of pidilite m seal 100gram, supply of drain cleaning 5 meter long spring wire waste pipe unblocked, supply of caustic soda for drain pipe cleaning, supply of foot operated valve for wash basin, supply of viega flush plate for wc standard chrome,, plate plastic code-449018, supply of hose clamp ss 40mm, supply of 20mm union gi fitting., supply of waste coupling 32mm for wash basin, supply of cpvc union 25mm, supply of metal paste 100gram, 1 inch cpvc pipe 6m, 3/4 inch cpvc pipe 6m, supply of one inch cpvc elbow, supply of two inch cpvc elbow, supply of 1 meter connection pvc pipe, supply of 2 feet connection pipe, supply of plastic waste pipe flexible, supply of pidilite cpvc solvent 50ml, supply of pvc solvent 50ml, supply of teflon tape for plumbing, hindware ovel counter top wash basin 10017
Tender For corrigendum : supply of single pole mcb 5 to 32 a , erection of metallic pole , street light timer switch with panel , supplying and drawing of wire of size having 3x1.5 sqmm , earthing with g.i plate 600x600x6 mm , earthing with copper plate 600x600x6 mm , xlpe armoured cable 3 core 10 sqmm armoured cable , xlpe armoured cable 3.5 core 16 sqmm armoured cable , xlpe armoured cable 3.5 core 50 sqmm armoured cable , 25x5 mm gi strip , sitc of 72 watt led street light with complete accessories , hot dip galvanised octagonal pole 6 metre height with base plate welded at bottom , self adhesic pvc type 5 metre , solar street light led based consist of white led luminaire led sum driver rating as per configuration along with solar pv modules and lifepo4 battery of capacity having 30 watt , sitc of totally enclosed cubical type compartmental floor mounting panel board of size 1450mm x 1000mm x 500mm , supply and fitting of glow sign board 15x3 feet size with ms structure support , ip based dome camera of 4 mp , ip based bullet camera of 4 mp , 8 channel nvr , 43 inch led tv , 6 tb harddisk drive , 4 u rack , 8 port poe switch with 2 fiber sfp ports , single media converter , 32 hdpe pipe , 4 metre 50 mm dia gi pipe , 5 mtr 4k hdmi cable , 20 mm pvc conduit medium class , utp 4 pair cat 6 lan cable , 2 kva online ups with 30 minute battery backup with smf batteries , supply and erecting of 250 kvar apfc panel , surge arrestor or surge protection device of type 2 tested for imax 100 ka , laying and fixing of one nos pvc insulated xlpe cable size above 185 sqmm and upto 400 sqmm , 3.5 sqmm 400 sqmm aluminium lugs and and brass gland , sitc of astronomical automatic switch , supplying and laying of xlpe insulated 1.1 kv grade 3.5 core 400 sqmm ug cable , supply and installation of 125a, 36ka, pfmccb with thermomagnetic release. , sitc of 5 to 32 a class c mcb , supply, fitting and fixing of 800a, air circuit breaker , supplying and fitting crca sheet with fabrication of boxes panel boards as per boq , supplying, installing on wall, testing and commissioning rising mains as per boq , supplying and erecting panel mounting type digital ammeter having three and half digit led display, external ct operated, calibrated for suitable to operate on 500v, 0 to 1000a ac supply , supplying and erecting panel mounting type digitalvoltmeter having three and half digit led display, calibrated for 0 to 750v ac suitable to operate on 500v ac supply , supplying and erecting led type indicating pilot lamp with led colours red yellow, green 230, 250v
Tender For supply of transformer rectifier unit, input ac 1ph 230 volts, output: 0 -110 volts dc (variable), capacity 5 amps dc, air cooled, housed i n ms box with input lead 3 pin socket, indication lamps and digitalvoltmeters for ac and dc & output dc terminals. [ warranty period: 30 months after the date of delivery ]
Tender For digitalvoltmeter with led display size 96 sq mm, multiline (3-line 4-digit led display) for me asuring ry, yb & br. input voltage 800v l-l with aux supply (12-48vdc) 4va. class:1.0, acceptable make: ae/socomec/rishabh/siemens/yokins only as per bill of material of rdso specification no. rdso/pe/spe c/tl/0195 - 2019(rev.0). [ warranty period: 30 months after the date of delivery ]