Latest dimmerstat Tenders | Government dimmerstat Tenders

CTN :38518874

31 Dec, 2024 NA

Kangra - Himachal Pradesh

Tender For supply of lv7 itr beml 50-224-13 mud flap rh lot 2 to 4 , lv7 itr beml 5310-005013 washer flat steel od 170 x id 60 x 20thk , lv7 itr beml 50-243 gimbal pin l-272 lot 3 and 4 , lv7 itr beml 3110-003551 coller bearing od 146 x id 198 x thk 18 , lv7 itr beml 3120-000380 50-312 bush lot 1 to 5 , lv7 itr beml 50-213-41 steel wire rope 6mm dia 4700 long , lv7 itr beml 5310-004988 nut eye bolt a f 80 dia 55 8 tpt , lv7 itr beml 3120-000671 bushing sleeve ms od 125 x id 83 x thk , lv7 itr beml 5306-004715 centre pivot bolt forging 373 mm long , lv7 itr beml 4730-001157 bolt fluid assy 178 mm long 53 a f , lv7 itr beml 5340-003293 fork end , lv7 itr beml 3120-000377 bushing sleeve steel ht od 58 x id 50 , lv7 itr beml 3120-000674 bushing sleeve steel od 158 xid100 x 50 , lv7 itr beml 50-152 alt-4 thrust pad , lv7 itr beml 3120-000676 50-119-2 washer thrust bronze od146xid99xthk6 , lv7 itr beml 50-290 winching roller lot 3 and 4 , lv7 itr beml 50-641 cap assy lot 2 to 4 , lv7 itr beml 50-66-79 hex bolt m 12 x 30 is 1364 s4 6 , lv7 itr beml 50-17-31 hexagonal screw m12 x 30 , lv7 itr beml 9905-000283 red reflex reflector 80 mm is 3105-80 , lv7 itr beml 50-223-91 indicator light holder 24v 21w bulb , lv7 itr beml 4730-000927 nut union pipe 38 m-911030 , lv7 itr beml 5315-049794 pin cotter split , lv7 itr beml 5315- 049798 pin cotter split , lv7 itr beml 50-64-18 spring washer m14 b lot 1 , lv7 itr beml 50-223-1 cable 15 mtr 15 0.3 1.5mm 12 core

State Government

CTN :38560508

19 Dec, 2024 1.00 Lacs

Botad - Gujarat

Tender For tender for supply,providing ,fixing and installtion of vertical boots for ht and lt bushing of transformer under dhola sub division under gadhada division.

State Government

CTN :38560631

26 Dec, 2024 3.00 Lacs

Morbi - Gujarat

Tender For annual rate contract for supply of vertical cable boots for transformer ht bushing with water draining arrangement as per technical specifisations under division office morbi-2

Central Government / Public Sector

CTN :38543533

18 Dec, 2024 NA

Begusarai - Bihar

Tender For supply of spares of nidec ht motor at erpl patna - , ball bearing 090-6218-c3, (emr117233), roller bearing 90 nu218ec c3, (emr104016), grease retaining ring din90, (emr224052), grease fugator, (emr224049), security ring, (emr102165), v-ring seal v 90a, (emr135744), v-ring din90, (emr224051), grease fitting type d gc1/4", (emr102021), insulated disk, (emr250002), insulated disk, (emr250003), bushing insulator 11kv430a, (1000168465), bushing insulator pin contact 50 mm2, (1000172849), compression spring d 6x15, (emr199415)

CTN :38093544

21 Dec, 2024 NA

Santaldih - West Bengal

Tender For corrigendum : procurement of spares for bowl mill xrp-883 for regular and overhauling maint. under bmd,stps. - upper journal housing, lower journal housing, upper bearing keeper, additional data:, for bowl mill xrp-883., keeper for journal bearing for bowl mill, xrp 883, spare part code:-va610880203001, seal wear ring,mat:en45,hardness:>300bhn, $for bowl mill xrp 883, bhel spare, code:va61088093001drg.no:36108802132, lock nut assy(with screw) for journal, $for bowl mill xrp 883, bhel spare code:va610880053001, mill upper journal liner assembly f or mill, xrp-883., additional data:, without skip roller guard, liner, 1 set = 2 halves, moc:, sailma-350, plate thickness: 12 mm, bull ring clamping ring,1set = 04esg $for, bowl mill xrp 883, extension ring segment for bowl $for, bowl, mill xrp 883, 1 set=6 segment,bhel spare, code:va611884053001, throat,static of air port ring assembly, for bowl mill-xrp-883, moc-sail hard., additional data:, 1 no= 1 segment, labyrinth seal for bowl mill xrp-883 for, bowl mill xrp 883, spare part code:va611001389001, cap for rotary air vane fixing bolt for, bowl mill xrp 803, liner for internal body of bowl mill for, bowl mill xrp 883, high wear, resistance,mat:sailma-350,size:od-, 3121,width-, 600,th-12,1set=6segments(1 circle), lock nut,ht,size:106mm dia. for journal, stop bolt of coal mill xrp-883, journal head & trunnion shaft assy $for, bowl mill xrp 883, trunion bushing rubber,var.-05 for bowl, mill xrp 883, bhel spare code:va610880473001, air seal ring upper $for bowl mill xrp 883, drg.no:36108802026 va610880613001, bolt,ft,size=2 in,l=160mm,pitch=5.00, ht, hex hd, grade 12.9, lock nut (spring stud), #, lock nut (spring stud) of bowl mill ( xrp, 883 ),sparecode:va613002673002, insert spring stud, for journal spring assy of bowl mill xrp-, 883, spring stud bearing (wear sleeve ), #, spring stud bearing (wear sleeve ) of, bowl mill ( xrp 883 ) sparecode:, va613002863002, cover wear sleeve,code:va613002763002, for bowl mill ( xrp 883 ), hose,ss 304 flexible hose, additional data:, double steel breaded size, -2.5" x 34" long with both sides f itting f or, trunnion shaf t of bowl mill xrp-883, link rod assembly for classifier for 883, bowl mill, drawing no: wbpdcl/bowl, mill-883/classifier/bm/130, mpo plate liner for bowl mill(xrp 883), as per sketch no.-wbpdcl/bktpp/bm-ii/53, additional data:, as per attached drawing,material-alloy steel, grade c5., chute for coal fdr o/l to mill,mat:ss304, for coal feeder, additional data:, as per attached drawing., sleeve coupling assy(22"),24722300635 #, # for coal carrying pipes, screw, soc hd cap,m24x90, ft,gr 10.9,ht, as per is:2269,din 912,iso 4762, thread: iso, metric, (coarse) 6g as per is:4218, material: high, grd, alloy steel-property class-10.9 as per is:, 1367, full thread, shim,air seal ring upper of trunion head, for bowl mill xrp-883 na, shim, 0.03 mm thick, ss 304, ,1 set contains 2 halves as per stps drg., no., wbpdcl/stps/bmd/shim/01, additional data:, for rj assy bearing housing of coal mill xrp-883., 0.15 mm thick shim of rja brg. housing,, coal, mill, for bowl mill matl., ss 304,1 set contains 2, halves as per stps drg. no., wbpdcl/stps/bmd/shim/01, additional data:, for coal mill xrp-883., 0.20 mm thick shim of rja brg. housing,, coal, mill, for bowl mill matl, ss 304,1 set contains 2, halves as per stps drg. no., wbpdcl/stps/bmd/shim/01, additional data:, for coal mill xrp-883., shim set-journal bearing keeper for bowl, mill, spare code : va610880353001,4, nos./set,drg,46108802005

State Government

CTN :38515878

20 Dec, 2024 NA

Rajkot - Gujarat

Tender For tender for supply of vertical cable terminal boots for transformer ht bushing with water draining arrangement under anjar division. (rate are excluding of gst)

State Government

CTN :38515930

20 Dec, 2024 NA

Kutch - Gujarat

Tender For tender for supply of vertical cable terminal boots for transformer ht bushing with water draining arrangement under anjar division. (rate are excluding of gst)

CTN :38526292

08 Jan, 2025 39.38 Crore

Jaipur - Rajasthan

Tender For segregation of 11 kv mixed feeders at tonk circles of jaipur discom of rajasthan state under revamped reforms-based and results linked distribution sector scheme (rdss) on turnkey basis against tn-583 - pcc poles, pcc pole 9 mtrs long (400 kg), pcc pole 9 mtrs long (200 kg), outdoor 11 kv o/d vcb kiosk complete with accessories including use of special tools, armoured cable of size 2c x 4 sq.mm. 1100 volts pvc insulated including supplyof ferrules, control cable of size 12c x 2.5 sq.mm. 1100 volts pvc insulated including supply of ferrules, overhead steel cored aluminum acsr dog[100sqmm(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing, overhead steel cored aluminum acsr rabbit conductor in all respect, earthing rod sets for s/s made with ms rod (galvanized ) 20 mm dia, 3 meter length with gi wire and clamp as per latest specification and drawing adopted & approved by nigam., ctpt structure set (galvanized), 11kv ct pt set(200/5 amp.), mip meter box for meter with ttb, go double break without eb isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc., 11kv ( with 9 x 24 kv post insulator ) 400 amp., horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc., 11kv ( with 6 x 24 kv post insulator ) 1 set=3 nos, supply of insulators, 11kv porcelain disc.insulators b&s type 45kn, hardware for 11kv disc insulator b&s type 45kn, composite polymer insulators, 11kv polymer disc.insulators t&c type 45kn, hardware for 11kv disc insulator t&c type 45kn, 11 kv composite polymer pin insulator complete in all respect, pg clamps for suitable acsr dog conductor, pg clamps for suitable acsr rabbit conductor, 11 kv danger plate of size 200 x 250 mm complete in all respect, supply of angle and channel, m.s channel 100x50x6 mm, m.s channel 75x40x6 mm, m.s. flat 50 x 6 mm (galvanized), 1.4 mtr channel bracket with clamp, supply of lightening arrestors, substation type 9kv, 10ka station class (1set=3 nos.) lightening arrestors., 11kv double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from m.s.channel 100 x 50 x ismc ( 9.56 kg. per mtr.) isa m.s.angle 65 x 65 x 6 mm, m.s.angle 50 x 50 x 6 mm and m.s.flat 50 x 6 mm (galvanized as per is), gi stay set (galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300x300x4 mm,12 mm dia turn buckle) including stay clamps,, strain/guy insulator for stay set, 7/10 swg gi stay wire, gi wire 8swg, underground cable for working voltage of 11kv aluminium conductor (is 7098) cable xlpe armoured, under ground cable of size 3x185 sq.mm for 11 kv, g.i. pipe of 125 mm diameter, b-class (is:1239 mark), gi pipe for cable support at pole ( each 3.3 mtr ), cable for11 kv aluminum conductor xlpe armoured ht cable, xlpe 3x185 sq.mm h.s. on indoor type, xlpe 3x185 sq.mm h.s. on outdoor type, xlpe 3x185 sq.mm h.s.s.t. joint, 11.4 mtr. long lattice tower made of 50 x 50 x 6 mm m.s. angle with 50 x 6 mm m.s. flat for bracing as per nigam specification, 11kv cross arm with top hamper with clamps made of ms angle 65x65x6mm, clamp 50x6 mm, earth clamp 50x6 mm (galvanized), fixing of 11/0.4 kv substation structure set for three phase 63 kva transformer on double poles in all respect. weight (as per specification and drawing with go channel) approx=219.54 kg (all galvanized as per relevant is), 11 /0.4 kv al wound, three phase distribution transformer (completely self protected with provision of lt bushing box), 25 kva, 63 kva, 6.35/0.24kv s/s structure set for single phase transformer on single 9mtr, 400kg pcc pole in all respects., 11kv 100 amp drop out cum isolator with 3.0 amp. fuse & 12 kv post insulators., lt xlpe cable, size 4cx70 sq. mm, size 4cx120 sq. mm, aerial bunched cable, aerial bunched cable 3cx25+1x25 sqmm, aerial bunched cable 3cx50+1x35 sqmm, lt distribution pillar

State Government

CTN :38531642

19 Dec, 2024 9.90 Lacs

Botad - Gujarat

Tender For tender for supply,providing ,fixing and installtion of vertical boots for ht and lt bushing of transformer under gadhada r1 sub division under gadhada division.

State Government

CTN :38531732

21 Dec, 2024 3.00 Lacs

Morbi - Gujarat

Tender For annual rate contract for supply of vertical cable boots for transformer ht bushing with water draining arrangement as per technical specifications under division office morbi-1(3rd attempt)

Dimmerstat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector

State Government

State Government

State Government

State Government