Latest disc insulator Tenders | Government disc insulator Tenders

State Government

CTN :40431595

09 Jun, 2025 57.90 Lacs

Multi City - Andhra Pradesh

Tender For replacement of 132kv busbar-1 of twin zebra acsr conductor and porcelain disc insulators of 9no. sections with twin moose acsr conductor, src insulators along with jack bus and connecting jumpers of 132kv feeders, 220/132kv, 132/33kv ptrs and bus coupler at 220/132/33kv gajuwaka ss under rmi works for f.y. 2023-24.

corporations/Associations/Others

CTN :40455174

10 Jun, 2025 NA

Erode - Tamil Nadu

Tender For procurement of 22kv 70 kn polymer composite disc insulator-13,000nos

Central Government/Public Sector

CTN :40427468

24 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For supply of repair of power fence and integration with existing cameras - fence energizer , network switch , desktop machine , software , battery , cp insulator , s hook , wire tightener , anti climb insulator , joint clamp , warning sign board , intermediate post , support post , corner post , ht wire 2.59mm dia , power cable , cat 6 network cabling , earthing , installation

Central Government/Public Sector

CTN :40362426

30 May, 2025 NA

Nabinagar - Bihar

Tender For supply of 00010 m4770696002 shaft insulator heater, 1kw, , 00020 m4770106098 support insulator heater 1kw

corporations/Associations/Others

CTN :40402744

17 Jun, 2025 3.86 Lacs

Bankura - West Bengal

Tender For supply of 11kv line spares pertaining to colony electrical maintenance mtps dvc - p g clamp suitable for dog conductor , lighting arrestor 10 ka, 12 kv , 11 kv, 400 a, 16ka, 3-pole air break gang operated isolator with drop out fuse suitable for vertical mounting - complete set , 11kv pin insulator - 5kn with pin and hardwares , drop out fuse 11kv 25amp. , drop out fuse 11kv 40amp. , 11kv disc insulator -45 kn with hardwares , complete galvanised stay set along with accessories - turn buckle, stay clamps, etc. , galvanised iron stay wire, 7by8 swg

corporations/Associations/Others

CTN :40383401

16 Jun, 2025 2.55 Lacs

Koderma - Jharkhand

Tender For providing of custom bid for services - replacement of 12 sets of old string disc insulators pertaining to swing bus of main bus #1&2 zone of 400kv switchyard, dvc, ktps

CTN :40408018

28 May, 2025 NA

Kochi - Kerala

Tender For procurement of waterjet and shafting spares - daspares, washer special nylon-steering push rod, slinger, bearing sheel-reverse duct pivot, bearing inner-reverse duct pivot, o-ring water seal inspection cover, 6mm washer special-reverse duct pivot, o ring cooler, spacing washer 7.0 thk-steering defl, spacing washer 8.0 thk-steering defl, sealing ring-jt steering, gasket-seal face holder, (o rings)imperial 0.13x2.25x2.50(228n70), o-ring imperial, (split pins) st st 316 0.25x2.00, m/c screw metric m12x30, washer flat imperial mild steel, washer spring metric m20, bonded seal 1/4" bsp, anode-tailpipe external &shaft inspection cover, anode-steering rod clevis, anode-reverse duct, anode-internal intake, anode-internal intake, o-ring intake-imp-race-tailpipe, o-ring-tailpipe, insulator forward composite tailpipe, support plate-internal anode, water bearing hm811 dry run, (seal)double acting sps250187(polypac), (seal)rod wiper wrs 100-150(polypac), (wear ring)bearing ring ipwr 1000(polypac), (wear ring)bearing ring(polypac ipwr 1375), (seal)push rod seal(gtu ring 1.375x1.625x0.187), (seal)push rod wiper (epld-01375), jet o ring, o-ring special impeller nut, (seal)shaft wiper polyseal 250-01.250, (seal)shaft seal gt"u" ring 187-01-250-312 unr, wear ring(rwr), (o rings)imperial 0.13x4.375x4.625(245n70), o rings, oil temperature sensor, (dowels)spring type m5x35 316 stst, shaft seal(hallite type 620 code 4498400), o-rings for level sensor, ikron line filter element(khc03577), centax b assembly

CTN :40115469

03 Jun, 2025 3.06 Crore

Jhalrapatan - Rajasthan

Tender For corrigendum : supply of spares for esp - collecting system, drg. no. gid-118-4f267-1, shock pad/head, en8, u-clamp for collecting electrode, is2062, bush for shock bar concave, en8, bush for shock bar convex, en8, sleeve/bush, is2062, lower horizontal plate, is2062, collecting rapping, drg. no. gid-118-4f267-2, bushing/ sleeve (to connect the shafts), is2062, shaft coupling (1), is2062, shaft coupling (2), is2062, rapping hammer assembly, is2062, en8, adjusting ring, is2062, internal bearing (two roller), en8, internal bearing (four roller), en8, emitting system, drg. no. gid-118-4f267-3, barbed wire, is2062, spinule (barbed electrode type-2), is2062, spiral wire, ss3161, support insulator heater 1.5 kw, ceramic, support insulator heater 1 kw, ss304, emitting rapping, drg. no. gid-118-4f267-4, antidust cover, is2062, en8, bearing for vertical shaft (three roller), en8, bush for vertical rapping shaft (three roller bearing), en8, minor pin wheel, is2062,en8,en19, major pin wheel, is2062,en8,en19, internal bearing (four roller), en8, internal bearing (two roller), en8, bush for emitting horizontal shaft (for bearing), en8, shaft end, en8, support tray, is2062, en8, rapping hammer assembly, is2062, en8, adjusting ring, is2062, shaft insulator heater, ceramic, shaft casing (vertical bearing cover plate), is2062, en8, bearing 111211, chrome steel, sealing bush (vertical bearing base plate), en8, drive shaft (top of shaft insulator), en8, inlet gas distribution plate, drg. no. gid-118-4f267-6, perforated plate (4), is2062, hopper, drg. no. - gid-4f267-9, hopper heater, ss304, emmiting other spares, collecting electrode, 513 gd crca, top hanger for ce suspension frame forexisting ce with 18 hooks 75x75x8 mm, is2062, sleeve tube/ bush 16x50 mm, f210, nut & bolts m16xms110 mm l, ht, nut & bolt m30 ms 105 mm l, ht, washer m16, ht, washer m30, ht, nut & bolt m10 ms 20 mm l, ht, ce frame top size 65x65x6 support angle, is2062, beam for ce suspension frame top 150x10000mm, is2062, shock bar guide supporting channel 150x10000mm, is2062, shock bar guide supporting channel 100x10000mm, is2062, angle 65x10000 mm, is2062, gas guide plate hopper 650x2000x3.15 mm, is2062, ee frame top size 60x40x3 box channel with lower side connector l-5540, is2062

CTN :40319578

26 May, 2025 18.23 Lacs

Budaun - Uttar Pradesh

Tender For for running contract for hon,ble sansad nidhi/vidhayak nidhi and other deposit works under edd-budaun (semi turnkey). - cartage of following material from store center nawada, budaun to je store/je store to site of work including loading & unloading at both ends maximum distance up to 30 km., a) pcc pole 8.5 mrt long/st pole 11 mtr long., b) 11 kv xlpe cable of 3x70/3x120/3x185/3x300 sq.mm., c) 250/400 kva t/f., d) 11 kv ct/pt unit of different size, e) 11 kv jointing kit of different size, f) 11 kv pilfer proof cubical of different size, g) lt abc cable of size 1x16, 3x50, 3x95, 3x120 sq.mm., cartage of line material (11 kv pin insulator, disc insulator, stay set, cross arm, gi wire, earthing rod, ms channel, ms angle, etc) from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 30 km., cartage of 10 kva & 25 kva transformer from store centre to site of work including loading & unloading at both site, the work of safe carriage 11 kv o/g vcb store center nawada budaun to work of site distance up to 0 to 30 km including safe loading & unloading., cartage of 63 kva to 100 kva transformer from store centre to site of work including loading & unloading at both site., earthing of each 11 kv line pole & t/f properly after drive of electrodes if size 20mmx250mm and connection the earthing point with gi wire., erection of pcc pole 8.5 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., erection of stp pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., fabrication and fixing of all 11 kv h.t/l.t. line accessories., erection of double pole on pcc pole 8.5 mtr/stp 11 mtr. long after digging of pit of required size including fabrication and fixing of top channel, droper channel & base channel alongwith, fixing all 11 kv accessories, fuse set 11 kv pin insulators and making connection properly., construction of new plinth for 250/400 kva as per uppcl norms, mounting of 250/400 kva t/f on plinth as per uppcl norms, providing and fixing wiremess fencing for 250/400 kva, erection/installation of following of vcb o/g in consumers site and cable joint of the panel to including earthing, grouting, anchor bolt of panel of making/repairing of pocket for cable to insert in panel form trench and fixing taping of busbar with wiring for ac,dc connection including providing ac and dc supply., chemical earthing for 250/400 kva t/f neutral and body complete, chemical earthing for vcb o/g, mounting of 10 & 25 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of 63 & 100 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of ct/pt unit with proper jumping of ht side and fixing of cable on lt. side of meter cubical properly, fixing of meter cubical as per uppcl norms, making a section pole to exist pole after fabrication & fixing of t channel fixing of all 11 kv accessories., erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming., laying lifting stringing of proper sagging of acsr weasel/rabbit/dog conductor for 3 phase, 3 wire 11 kv line including binding & jumpering properly., laying lifting stringing of proper sagging of 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm., laying of underground 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm. sizes with open trench by brick & sand as per uppcl norms., filling the 11 kv jointing kit (joint kit providing by contractor), la

CTN :40412114

26 May, 2025 NA

Mathura - Uttar Pradesh

Tender For deposit work in the area of edsd-laxminagar under edd-laxminagar, mathura - carriage of 8.5 mtr long pcc pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 9/11 mtr long st pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 16 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 25 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 63/100 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 250 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 11 kv xlpe cable size 3x70/3x120 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of 11 kv xlpe cable size 3x185/3x300 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of line material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel and other required material from store center at 132 kv substation mathura to the site of work including loading and unloading of material at both ends., erection of single pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of single pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., installation of stay set with grouting and nuzzling etc. as per respo drawing along with all routine material to be used for such works., earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour t&p and required material for such work., laying, sagging stringing and binding of acsr weasel conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of acsr dog conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of arial bunch conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of lt pvc cable on the erected pcc pole/stp including jumpering as per respo manual., laying of 11 kv xlpe cable size 3x70/3x120 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., laying of 11 kv xlpe cable size 3x185/3x300 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., filing of cable box as suitable size as per direction of supervising engineer., filing of straight through as suitable size as per direction of supervising engineer., chopping of tree branches to clear the route properly., mounting of 16 kva transformer on the double pole/plinth struct

Disc Insulator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others