Tender For bid to ras supply of valve core tr ci long short e e - valve core tr- ci long short , cap tyre valve type head 880z , kit cold patch for tube repair complete , spark plug champion rc 8 yc , bulb 12v 5 w , bulb12 v 21 w , fuse 15 amp , bush spring shackle , nipple grease button head 9mm , bulb head lamp 12 v 45 w , filter fuel , filter assy shorter , mater cyl kit , roof marker lamp rh , belt v ribbed , horn assy high , adjustable spanner 200mm , light fog , front direction indicator , cable assy control , mirror assy out rear view rh , tail lamp rh , element air cleaner , relay assy , cable assy clutch , blade assy wiper , relay turn signal , lamp fluroscent , electronic flasher kit
Tender For :provision of water facility at slf bhalswa - boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. all type of soil (350 mm dia), boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. rocky strata including boulders-350mm, gravel packing in tubewell construction in accordance with is:4097, including providing gravel fine/medium/coarse, in required grading & sizes as per actual requirement, all complete as per direction of engineer-in-charge., development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as reqd. the development shall be considered complete when gravel stop sinking, discharge ceased to improve and the sand contents are not more than 10 ppm after 20 minutes of starting the pump complete as reqd., providing, lowering and fixing/placing in vertical position ms black casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required. (b) 150 mm dia (nominal bore), providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell. (a) 200 mm dia., supply, lowering and fixing following size of g.i. pipe (m-class) i/c cutting threading on both sides etc. isi marked etc as reqd. (d). 50mm(nominal bore), s & f following size of g.i. elbow. as reqd. (d). 50mm, s & f ms clamp made up of iron flat of size 50x6 mm with 4 nut bolt for holding the gi pipe as reqd. (b) 50 mm., providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) : 50 mm nominal bore, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (e) three phase 7.5 hp having discharge of 480 lpm approx. at 48 m head., s&f following size of g.i.socket as required. 50mm, s&f following size of g.i.union as required. 50mm, p&f following sizes of pvc insulated & pvc sheathed copper conductor 3 core submersible cable confirming to is.694/1990 etc. as reqd. (b) 3x 4 sq.mm., supply of cubical type control panel board for three phase star delta starter, three position selection with auto switch for submersible pumping set of following rating complete with single phasing preventer in auto, contactor (25amp), 0/l relay tp, mcb, voltmeter, ammeter, vss and indication lamp etc. including lamp etc. including connection etc. as required. (a) 10 h.p. rating submersible pump set over load relay (range13-21 amp) & contactor (range 25 amp)., supplying and fixing following sizes of steel flexible safety rope for holding s
Tender For e-bid for rate contract cum supply and empanelment of surgical and suture items - linear cutter 55mm with six rows, 3d staple formation, option of closed staple height of 1.5mm/1.8mm/2mm in one cartridge only, linear cutter 75mm with six rows, 3d staple formation, option of closed staple height of 1.5mm/1.8mm/2mm in one cartridge only, curved green cartridge having close staple height of 2.0 mm, tactile feedback on completion of firing sequence, new anvil, knife with every catridge, circular stapler 33mm with controlled tissue compression or dst technology with, longer staple leg 4.5 mm to 5.5mm , fixed or tilt top anvil ,available in various shaft sizes std. or xl for deeper access , usfada approved, laparoscopic cartridge for stapler 60 mm blue, 1.5 mm closed staple height with gripping surface technology and six rows compatible with all range of endoscopic linear cutter 60mm, laparoscopic cartridge for stapler 60 mm green, 2.0 mm closed staple height with gripping surface technology and six rows compatible with all range of endoscopic linear cutter 60mm, pph stapler 33mm - hemorrhoidal stapler kit consists of 33mm hemorrhoidal circular stapler (with fixed anvil, adjustable closed staple height from 0.75 mm 1.5 mm, staple open leg length of 4.0mm 5.5 mm), suture threade, circular anal dilator, purse-string suture anoscope, suture for purse string., optically guided bladeless trocar 12mm with bilateral tissue separators, optical tip to eliminate blind entry, clear ribbed cannula to enhance abdominal wall retention, recessed stopcock valve, funnel shaped housing, duckbill secondary seal, integrated universal seal that eliminates the use of reducer, 150mm length., optically guided bladeless trocar 12 mm with bilateral tissue separators, optical tip to eliminate blind entry, clear ribbed cannula, recessed stopcock valve, funnel shaped housing, duckbill secondary seal, integrated universal seal that eliminates the use of reducer length 100mm., facial closure device contain - optical bladeless trocar with facial closure device comaptible with clear cannula have two side opening meant for uniform port closure, varied staple height reloads/cartridges for 60 mm gia instruments with tri-staple technology, with the cutting knife blade incorporated in the reloads itself, with purple varied staple height of 3, 3.5 and 4mm leg length, varied staple height reloads/cartridges for 80 mm gia instruments with tri-staple technology, with the cutting knife blade incorporated in the reloads itself, with purple varied staple height of 3, 3.5 and 4mm leg length, eea circular stapler purple colour medium thick , triple row with tristaple technology (three row of staple inner to outer row 3.0,3.5 and 4.0 mm with sloped cartridges face in one stapler) diameter 31mm, linear cutter with varied staple height, tri-staple technology-enabled reloads integration with left and right firing knob(both side firing) ,linear cutter stapler with integrated gap control technology in 80 mm tristaple gia stapler, compatible with tri-staple gia 80 mm open linear cutter reloads/cartridges purpule and black, wound protector with double ring in medium 5-9 cm, endo catch specimen removal kit:with continuous ring, polyurethane pouch with 34.5 cm shaft length , 10mm with leakproof and impervious material to cancer cells of 0.5 microns/ pretied purse string on pouch usfda approved, laparoscopic liner cutter without integrated fresh knife with 360*rotation & 0-45* articulation in both direction : for use with cartridges in sizes of 45mm capable of loading all length cartridges on same gun only, platting for maxillary swing and mandibular fixation surgeries (titanium) plates - 2 mm thickness (2*2 ) hole drill bit machine with insertion tools would be provided by the rc holder firm as per need of the respective hospital, platting for maxillary swing and mandibular fixation surgeries (titanium) plates - 2 mm thickness (1*2) hole drill bit machine with insertion tools would be
Tender For supply of direction control valve part no. c314 working pressure 700 bar suitable for av lock make hydrapac hydraulic power unit model-hp41. make: avlock/avdel or similar repute d brand. [ warranty period: 6 months after the date of delivery ]