Latest dismantling work Tenders | Government dismantling work Tenders

Central Government/Public Sector

CTN :39124927

25 Feb, 2025 10.00 Lacs

Mumbai - Maharashtra

Tender For corrigendum : dummy tender - scaffolding work, providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineering-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding, dismantling work, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

CTN :39417453

24 Feb, 2025 3.96 Lacs

Multi City - Telangana

Tender For filling of dismantle and gravel at venkatadri nagar colony in ward no.07 in nagaram municipality under municipal general funds 2024-25

CTN :38748493

27 Feb, 2025 7.96 Crore

Jodhpur - Rajasthan

Tender For corrigendum : electrical lab equipment - colour digital storage oscilloscope 100mhz 1gs/s with fft, voltmeter 0-500v (analog ), voltmeter 0-500v (analog ) moving iron type, ammeter 0-1-2a (analog ) moving iron type, ammeter 0-2.5-5a (analog ) pmmc type, ammeter 0-5-10a (analog) moving iron type, wattmeter lpf dynamometer type, wattmeter 5-10a, 75-300-600v upf dynamometer type, megger 500v 1000m digital insulation tester, single person push button operation, bridge trainer kit, digital earth tester, energy meter 1-phase, trivector meter, dc motor cut section for lab application with manual, transistor characteristics npn-pnp trainer kit, trainer kit for turn off circuit of scr for laboratory purpose, smps trainer kit power supply : 230 v ac , 50 hz, ups trainer kit input voltage 180-260 volts, 50 hz, three phase induction motor cut section for lab application, three phase 6 cage induction motor trainer kit ,, universal motor phase single phase, stepper motor voltage 24-48 vdc, three phase squirrel cage induction motor trainer kit for speed control using auto transformer and vvvf method mains supply : three phase, 415v 10%, 50hz, lux meter, house & commercial wiring installation trainer, speed control of dc shunt motor trainer, speed control of dc series motor trainer, functioning of ct, pt and isolation transformer complate trainer, voltmeter and ammeter method for measurement of medium resistance., clamp meter, dc, ac & wave shaping circuit trainer, oil testing kit, transformer trainer 300 va, dc motor coupled to dc motor trainer, 3 phase squirrel cage induction motor trainer, single phase ac inducation motor trainer, dc motor coupled to 3 ph ac motor trainer, 3 phase ac integrated motor coupled to dc integrated motor setup (motor-generator setup):, electrical load power factor trainer (apfc), complete house wiring installation trainer, 3 phase squirrel cage induction motor trainer, control of 3 ph. squirrel cage induction motor trainer, 3 phase slip ring induction motor trainer, 1 ph. ac induction motor trainer, 3 phase salient pole alternator coupled to dc integrated motor setup (motor-generator setup) trainer, ac servo motor trainer with pid controller, dc servo position control trainer with pid controller, measurement of linear displacement by lvdt transduser trainer, strain gauge transduser trainer, temperature sensing transduser trainer, pressure measurment by piezo resistive transducer trainer, angular speed measurement using stroboscope & tacho meter transduser trainer, op-amp trainer, adc & dac circuits trainer, pelton turbine trainer (assemble & dismantle of micro hydro plant), microcontroller trainer 8051, solar and wind turbine trainer, fuse & mcb characteristics trainer, air circuit breaker trainer (dismantle acb), induction type electromagnetic relay trainer, electromagnetic over current reley i numerical relay trainer, percentage biased differential relay trainer, motor fault simulator trainer, on transmission line protection simulation trainer., lcr meter, digital multimeter, tachometer, wire striper, pliers, ball pen hammer, earth tester, took kit, soldering iron 25 watt with lead

State Government

CTN :39383830

11 Mar, 2025 NA

Delhi - Delhi

Tender For supply of title 1 to 12 - providing, installing, testing and commissioning of silent type diesel generating setcomplying with cpcb iv+ alongwith having prime power rating of 250 kva, 415 volts at 1500rpm, 0.8 lagging power factor at 415v suitable for 50 hz, 3 phase system & for 0.85 loadfactor including credit for dismantle material of old unserviceble dg set and consisting of thefollowings , fabricating, installing, testing & commissioning of automatic mains failure control suitable for250 kva silent type dg set with credit for dismantle material of amf complete with relays,timers, set of cts for metering & protection and energy analyser to indicate currents, phase andline voltages, frequency, power factor, kwh, kvarh & provision for overload, short circuit,earth fault, under frequency, control cabling from amf panel to diesel engine and elsewhere ifrequired, all complete and interlocking including the followin , supplying and fixing exhaust gas piping of suitable dia. welded black ms, b class pipeconforming to is:3589 cut to required lengths and installed with necessary bends, supports andclamps, anti-vibration mountings, insulation of exhaust system with mineral wool/rockwool, 50mm thick wiremesh & aluminum cladding etc., as required as per specification , supply and laying of of 3.5 x 185 sq mm sizes of xlpe insulated pvc sheathed aluminiumconductor armoured power cable of 1.1 kv grade confirming to is:7098 (part 1) includingmaking connection with suitable size of aluminum lugs, laying on wall/surface, testing etc. asrequired. , supply, installation, commissioning & testing of complete set of maintenance free chemicalearthing with copper bonded electrode suitable dia & length 50 x 6 mm pure copper internalstrip with suitable terminal, ground enhancement material / back fill compound / groundingcompound of permanent & maintenance free nature. (50 kg. for each earth pit) , providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. asrequired. , sitc of clean agent based tube fire suppression system 2 kg 10 mtr. heat sensing ul listedtube with ul listed fk5-1-12 clean agent gas , supply & laying of 10 core x 2.5 sq mm copper conductor control cable of insulation:-xlpe(cross linked polyethylene / pvc), inner sheath:- pvc (polyvinyl chloride) st-2 / frls,armouring:- galvanized steel flat strip or round wire, outer sheath:-pvc (polyvinyl chloride)st-2 / frls i/c making connection, testing, laying on wall/surface & commisioning etc completeas required , supply & laying of 3 core x 2.5 sq mm copper conductor control cable of insulation:-xlpe(cross linked polyethylene / pvc), inner sheath:- pvc (polyvinyl chloride) st-2 / frls,armouring:- galvanized steel flat strip or round wire, outer sheath:-pvc (polyvinyl chloride)st-2 / frls i/c making connection, testing, laying on wall/surface & commisioning etc completeas required , supplying and making end termination of size 3 x 185 sq. mm (57mm) with brass compressiongland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpealuminium conductor cable of 1.1 kv grade as required. , 1 supply installation testing and commissioning of avm pads ecs 25x400 suitable for dg set. 1 , supply of high speed diesel for operation of dg set i/c cartage filling etc. complete as require

Central Government/Public Sector

CTN :39335764

24 Feb, 2025 5.92 Lacs

Azamgarh - Uttar Pradesh

Tender For supply of supply of air conditioning work at azamgarh city branch under rbo v azamgarh - cassette ac, 3.0 tr bee 5-star inverter ac , supply of hi-wall split ac, 1.5 tr bee 5-star inverter ac , supply of hi-wall split ac, 1.0 tr bee 5-star inverter ac , installation of 3.0 tr cassette ac , installation of 1.5 or 1.0 tr hi-wall split ac , supply and installation of copper refrigerent for 3.0 tr cassette acs , supply and installation of copper refrigerent pipes for 1.5 or 1.0 tr sacs , supply and installation of interconnecting wires for 3.0 tr cassette acs , supply and installation of interconnecting wires for 1.5 or 1.0 tr hi-wall split acs , supply and installation of 25 mm pvc drain pipes , supply and installation of 32 mm pvc drain pipes , supply and installation of ms angle for outdoor units , supply and installation of 4kva stabliser , supply and installation of 5.0 kva stabliser , dismantle and reinstallation of old acs in the existing premises , dismantle and reinstallation of old cassette acs in the existing premises , dismantle of old acs in the existing premises.

State Government

CTN :39365035

21 Feb, 2025 5.15 Lacs

Bharatpur - Rajasthan

Tender For old chc building dismantle

State Government

CTN :39360205

24 Feb, 2025 2.50 Lacs

Handwara - Jammu And Kashmir

Tender For dismantle ofpanchayat ghar within the premises of transit accommodation kulangam bagh handwara

corporations/Associations/Others

CTN :39361001

02 Mar, 2025 NA

Udumalpet - Tamil Nadu

Tender For running works contract for the erection works for ht overhead feeder, lt overhead feeder, structure erection works and dismantling works for madathukulam section of madathukulam sub division in udumalpet division.

corporations/Associations/Others

CTN :39361003

02 Mar, 2025 NA

Udumalpet - Tamil Nadu

Tender For running works contract for the erection works for ht overhead feeder, lt overhead feeder, structure erection works and dismantling works for manupatty section of north /udumalpet sub division in udumalpet division.

corporations/Associations/Others

CTN :39361004

02 Mar, 2025 NA

Udumalpet - Tamil Nadu

Tender For running works contract for the erection works for ht overhead feeder, lt overhead feeder, structure erection works and dismantling works for komaralingam section of madathukulam sub division in udumalpet division.

Dismantling Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors