Latest dissolution tester Tenders | Government dissolution tester Tenders

Central Government / Public Sector

CTN :43203251

06 Jan, 2026 NA

Digboi - Assam

Tender For design, manufacturing, inspection, testing, tpi charges, and material supply of temperature elements (tc/rtd) with thermowells for the iocl, digboi refinery expansion project as per specifications and documents mentioned in material requisition.

State Government

CTN :43205750

07 Jan, 2026 NA

Gandhinagar - Gujarat

Tender For providing of selection of laboratories for testing of products/material - minerals; minerals; sample; chemical

corporations/Associations/Others

CTN :42721109

30 Dec, 2025 2.21 Crore

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : manufacture, fabrication, supply,erection, testing and commissioning with 1x8 mva pr.tr,stn transformer, associated equipments, accessories, control panels, control room and electrical works at o.krishnapuram in trichy metro under tkc thro e tener - electrical material supply, power transformer 33/11kv, 8mva power transformer with oltc, breaker along with ct for outdoor ss 33 kv (gc) vcb (out door) 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (600-300/1-1a) with structure and complete accessories with breaker platform., 11kv (lv) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulatedwith permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (1200-600/1-1a) with structure and complete accessories with breaker platform., 11kv (feeder) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (400-200/1-1a) with structure and complete accessories with breaker platform., potential transformer 33kv potential transformer with tc (single phase unit), 11kv potential transformer with tc (three phase unit), panels ac panel for 33kv ss, 110 v dc annunciation panel type b, 110v dc indoor c&r panel for gc breaker, 110v dc indoor c&r panel for lv breaker, 110 v dc indoor c&r panel for twin feeder, control cables, junction box and accessories 14c x 2.5 sq.mm copper cable armoured, 8c x 4 sq.mm copper cable armoured, 4c x 4 sq.mm copper cable armoured, 4c x 2.5 sq.mm copper cable armoured, 2c x 2.5 sq.mm copper cable armoured, isi mark 19 / 22 mm cable gland as directed by the field engineer., isi mark 25 mm cable gland as directed by the field engineer., isi mark cable 28 mm gland as directed by the field engineer., lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination, supply of gi chequerred plate 6mm thickness, junction box supply of ct/pt junction box made out of 14swg (2mm) m.s.sheet wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400w x 300h x 150d, supply of ac junction box of size 535x310x127mm of 18swg ms sheet including hrc fuse unit-18 nos. should be fitted with base, consumables etc. (the box shall be vermin proof, shall have sturdy hinges and locking arrangements), supply of mounting channel suitable for cbtm 5 terminal block in panel /box as required and as directed by the field engineer., supply of disconnected type terminal block suitable for ct circuits in panels/ box as required & as directed by the field engineer, supply of isi mark bakelite hrc fuse holder with fuse of 2/5/10/16 amps reputed make in panels/ boxes for ac/dc/pt circuits wherever required as directed by the field engineer. 16 amps - fuse holder with hrc fuse, 63amps - fuse holder with hrc fuse, bus & bus materials zebra acsr conductor, 2.0" / 50 mm aluminium bus bar (thickness:5 mm), 22/33 kv pt insulators, 11kv pt insulator, 11kv, 120kn disc insulators (antifog), strung bus eye bolt of 18 - 20 mm dia gi rod of required length suitable for 33kv, 22kv and 11kv strung bus including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer., clamps and connectors tension fitting clamp 4 bolted for zebra, t clamp for 2" bus to single zebra, t clamp for zebra to zebra, switchend clamp for single zebra, switchend clamp for 2" busbar, reducer clamp for 2" bus to zebra, pg clamp for zebra, free end clamp for 2"busbar, corana bell for 50mm bus bar, switch end clamp for mink, seating block for 2" bus bar(for g

State Government

CTN :42920788

19 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution of various signalling equipments as per boq attached inspection rites consignee - fabrication and supply of point rodding (ground connection) set with insulation complete set for electric point machine 220 mm stroke clamp type for thick web switches as per rdso drg no rds0/s/3454 alt -a ver-1 or latest. (inspection agency:- rites), supply and fixing of gi bend pipe 50 mm dia., bclass, for cable entry into point machine with all accessories. note: th is item to be operated independently for those points where point machines are functional, but gi bend pipe is not provided. for all other new installation of point machines, item 06002 of the sor includes the provision of gi bend pipe. (inspection agency:- consignee), supply of point machine ground connection insulation complete set including for p bracket insulation for point machine irs type 220 mm.(inspection agency:- rites), supply of stretcher bar insulation complete set for point machine irs type 220 mm stroke clamp type.(inspection agency: - consignee)., supply of track lead junction boxes fiber glass as per drg.no. cwm - 00597 of f.r.p material to irs.s.23 specification along with fixtures i.e., on ms angle 50x50x5mm, 0.9 meters long two numbers of g.i. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm pbt terminal). (inspection agency:- consignee), supply of aluminium ladders of height 5 feet for maintainer at relay room and ips room of model no: 8226 of youngman, plantex or similar. (inspection agency: - consignee)., supply of lps 3.00 mm thick rolled copper strip of reputed branded make. (inspection agency: - consignee), supply of insulation resistance tester. make fluke 1507 or similar. (inspection agency:- consignee), supply, fabrication and fixing of the calling on board/bslb board as per rdso drg. no. sa 2373 (adv)/stop/warning board as per drg. no. sa-2380 (adv), or as applicable, on concrete foundation and painting with retro reflective paint. all work to be carried out as per railway site engineer instructions.(inspection agency:- consignee), supply, fabrication and fixing of retro reflective signal number plates as per ncr drg. no. typ/14/0014 dtd 28.11.2014 issued vide ncr letter no. s&t/ ncr/drg/typ dated 28.11.2014, on signal post with contractors own material like clamp, u bolts, nuts etc.(inspection agency:- consignee), supply of digital cable fault locator for metallic s&t cables of reputed make as per tec spn no. gr/tie-05/03, july 2006 & tec 73060:2006 like khushicomms model venus 120 orsimilar branded make. consignee shall approve the supply only after successful demonstration at site(inspection agency:- rites), supply and testing of cable route tracer and marker locator model and make 3m dynatel model locator 2273m or reputed branded make.(inspection agency:- rites), supply, installation and commissioning of central gateway. note: single centre gateway shall cater maximum up to 32 data transmitter node (modbus).(as per annexure a) (inspection agency:- rites), supply, installation, testing and commissioning of data transmitter node in location box. modbus type note: maximum range 400 meter. (as per annexure b) (inspection agency: - rites), supply, installation , testing and commissioning of data transmiter modbus cum repeater for augmenting range of ourdoor data transmiter node (modbus), where distance of location box is more than 400 meter with respect to central gateway.(as per annexure c) (inspection agency:- consignee), apparatus case led indication status display unit cum allarm system for yard.single display system shall cater to maximum 45 no of location boxes.(as per annexure d)(inspection agency:- consignee), fabrication, supply and fixing of p, c, a, g, ibs etc. marker disk painted and lettered with enamelled paint of approved colours, on signals, conforming to rdso drg. no.sa - 23456, as per standard practice and technical specifications.(inspection a

Central Government/Public Sector

CTN :43162610

22 Dec, 2025 NA

Burnpur - West Bengal

Tender For supply of title1 , title2 , title3 , title4 , title5 , title6 , title7 1. valve,check, dual plate, (spring return):500 mm, body & disc astm a216 gr. wcb, seat nitrile rubber, spring aisi 304, hing/stop pin - aisi 304, end connection double flanged to ansi b16. 5 rf(150#), mfg. std. - api 594, insp. & test std. api 598, additional requirement ms companion flange,bolts & nuts & gaskets, 2. check valve : 600 mm, type - dual plate double flanged, body - astm a 216 gr. wcb, disc & spring - ss 304 / astm a 351 gr. cf8, sea t - epdm, mfg. std. - api 594,test std. - api 598, end connection - flanged end ansi b 16. 5 (150#), hyd. test pressure - 32 kg/cm2 (body) & 22 kg/cm2 (seat), accessories - companion flange, gasket & fastener. , 3. check valve type, design : dual plate wafer moc, body/bonnet/cover : carbon steel material spec, body & c over : astm a216 grade wcb size : 200 mm end connection : flanged pressure class : 150 lb end-end/face-face distance : 127 mm moc, seat : stainless steel 304 material spec, disc : grade cf8m design specification : api 594 / ansi b16. 34 material/spec, spring : inconel face to fac e and end to end spec: asme / ansi b16. 10 / api 594, fit in between asme b16. 5 flange by fastener, shaft material: stainless steel 4 10, testing standard: api 598 / en12266 part 1, 4. check valve type, design : dual plate wafer moc, body/bonnet/cover : carbon steel material spec, body & c over : astm a216 grade wcb size : 150 mm end connection : flanged pressure class : 150 lb end-end/face-face distance : 98 mm moc, seat : stainless steel 304 material spec, disc : grade cf8m ) /bid number: gem/2025/b/6995853 * /dated: 12-12-2025 & & / bid document1 / 14

Central Government/Public Sector

CTN :42533378

19 Dec, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : design, engineering, procurement, fabrication, inspection, testing, transportation, and supply of non standard flanges as per material requisition

Central Government/Public Sector

CTN :43191299

29 Dec, 2025 NA

Golaghat - Assam

Tender For design, engineering, procurement, fabrication, inspection, testing, transportation, and supply of cable ducts and accessories as per material requisition

State Government

CTN :43085911

23 Dec, 2025 45.10 Lacs

Kheda - Gujarat

Tender For corrigendum : annual rate contract for erection of ht/lt and tc and maintenance work at nadiad east & nadiad west s/dn / anywhere under kheda district with cost of nut-bolt and other low value miscellaneous material required for erection work.brief description of scope of works :- survey, planning, installation, testing, commissioning and documentation, geo tagging of asset of all items/material required to complete the works

State Government

CTN :42996757

23 Dec, 2025 53.4 Thousand

Jharsuguda - Odisha

Tender For corrigendum : providing of selection of laboratories for testing of products/material - medical electrical equipment; medical equipment; number; biological

corporations/Associations/Others

CTN :43213446

19 Dec, 2025 NA

Multi City - Multi State

Tender For supply (raw material cnc machining & metal finish of copper , bus bar , upper part, testing charges

Dissolution Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors