Latest distribution trolley Tenders | Government distribution trolley Tenders

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

State Government

CTN :39299075

15 Apr, 2025 NA

Delhi - Delhi

Tender For corrigendum : tender for supply of line tester , 7 drawer tools trolley , combination wrench set (mm) , combination wrench set (inches) , 1/2 inches drive deep socket set , torque wrench , centre punch , hammer 250 gram , hammer 500gram , hammer 1kg , hammer 5kg , soft face hammer , straight snips , file set , desoldering , digital meter , multi meter , grease gun 3kg , grease gun 10kg , wise 8 inches , wise 12 inches , hand grinder 4 inches , rubber hammer , 1/2 inches socket set 7 to 32 hd (mm) , 1/2 inches socket set 7 to 32 hd (inches) , wd 40 (500ml) , rubber hand gloves , safety shoes , 100-meter measuring tape , 3-meter measuring tape , measuring wheel , rivet gun (heavy duty) , adjustable wrench 8 inches , chain wrench 2 inches , chain wrench 4 inches , chain wrench 6 inches , ball pin hammer 100gram , ball pin hammer 250 gram , hydraulic jack 6 ton , hydraulic jack 2 ton , piston ring compressor rc-3 , piston ring compressor rc-4 , piston ring compressor rc-5 , ring expander , 1/4 inches socket wrench , bit socket set , 1/2 inches screwdriver set , matric safety comb wrench set , t handle wrench 12 inches , wrench kit , key wrench ball point set , key wrench star point set , flat chisel 6 inches plus 8 inches set , screw driver 12inches , screw driver 6 inches , screw driver 18inches , wire cup brush 3 inches , drill bit set 1-13mm , drill machine , welding rod , 3/4inches t handle extension 4 inches , 3/4 inches drive 34 socket , 3/4inches drive 36 socket , 3/4 inchesdrive 38 socket , 3/4inches drive 42 socket , 3/4inches drive 48 socket , 1/2 inches drive handle t l type , 1/2inches extension 5inches , 1/2 inches extension 8inches , 1/2 inches extension 12inches , rpm tester , grinding goggles , face shield , face shield glass , pipe wrench 8 inches , pipe wrench 12 inches , pipe wrench 18 inches , pipe wrench 24 inches , adjustable wrench 12 inches , adjustable wrench 18 inches , bearing puller 2 jow 12 inches , bearing puller 2 jow 6 inches , bearing puller 3 jow 12 inches , bearing puller 3 jow 6 inches , bearing puller 3 jow 16 inches , air hose reel , washing tray , tachometer , oil extractor , welding machine 300 amp , battery charger , nozzle tester , alternator testing , compressor portable , painting gun , table grinder , tyre pressure gauge , extension bit , diesel engine compressor kit , petrol engine compressor kit , impact wrench , flank socket set , tab kit inner outer , circuit tester , soldering iron set 120 watt , automatic circuit voltage tester , vehicle battery tester , hydrometer , new fire extinguisher , co2 gas type 4.5 kg capacity , new fire extinguisher , abc powder type 6 kg capacity , new fire extinguisher , mech. foam type 9 ltr capacity

State Government

CTN :39711294

28 Apr, 2025 NA

Manuguru - Telangana

Tender For corrigendum : supply of t and p materials for cam division/stage-i and ii/btps.-supply of t and p materials for cam division/stage-i and ii/btps.- heavy duty general purpose hydraulic jack,capacity:5ton,, stroke:150mm,model:xl00, hydraulic jack:, capacity:20ton,stroke length :12mm,jack closed height:lessthan 55mm., hydraulic pump specifications.no of plungers:1,maximum pressure, pump, can develop:700kg/cm2,discharge/stroke.cc:2.8,weight: <=9kg., pump with teliscopic collapsible handle, hydraulic jack,with pmp threaded,100t,150mm, make: ener pac, portable arc welding machine model tornado -201 power saource with with, 3 meters supply cable + 3 meters welding cable with holder + 3 meters, return cable with earth clamp, make : esab/l&t/ador fontec, digital vibration meter model:ird 811d, gauge,dial;range:0.01 to 20 mm, make: mitutoyo, dial guage stand magnetic on/off switch, make:mitutoyo, vernier caliper (0-150mm) code no.530-335, vernier caliper (0-300mm) code no.530-322, make:mitutoyo, outside micrometer (150-300mm) code no.104-136a, make:mitutoyo, outside micrometer (300-400mm) code no.104-142a, tubular inside micrometer code no.137-208, block,chain pulley;type:triple spur gear manual;capacity:5 t;length:20, m;make:indef;additional information:lift p-series, block,chain pulley;capacity:2 t;maxi lift:20 m, block,chain pulley;type:heavy duty triple spur gear,light weight, body;capacity:1 t;maxi lift:15 m, make: indef/demag/kito/venus, d-shackle 5ton, make: usha martin, shackle;type:d;load rating:1 t, d-shackle 2 ton, make: usha martin, shackle;type:d;load rating:3 t, make: usha martin, d shackles 10 ton lifting capacity, make: usha martin, steel wire rope slings 10 ton capacity x 6mtr long, make: usha martin, belt sling,75 mm width 4 mtrs. length of polyster duplex flat webbing, with plain loops at both ends safety factor 7:1., make: usha martin, circlip;type:plyer;size:195 mm;additional information:ptno 1441-7internal nose, hand operated high pressure grease gun with all accessories(hose,nipples & trolley arrangement)-5kg capacity, allen keys set,1/16'' to 3/8'', feeler gauge, thickness: 0.03 to 0.5mm, no of leaves: 13 (long leaves),series: 184, make:mitutoyo, universal sets adjustable spanner 1171 cp insulation plier 162-8j,s.d.932&859, spanner set,double open end;size:32x36 mm;material:chrome vanadium/carbon steel, taparia make heavy duty pipe wrench ,length-450 mm,least max opening 73mm,product no-hpw 18, make:tapparia/mekastar/stanley/torquestar, taparia make heavy duty pipe wrench ,length-250 mm,least max opening, 48mm,product no-hpw 10, make:tapparia/mekastar/stanley/torquestar, d spanners set, 12nos, 6-32 mm, make: jhalani, bench vice,150 mm, ring spanner 6-32mm, hand pump, for oil barrel, hand greaqse gun, capacity:1kg, spanner,mekaster double ended deep offset ring spanner,chrome vanadium, steel chrome plated,wave profile having a/f size (mm):32x36 confirming, to din 838,iso 3318,10103,10104&691.,part no.mdrm-3236, spanner,mekaster double open ended spanner chrome vanadium, steel,chrome plated,position of open ends 15 degree having a/f size, (mm): 36x41 confirming to din 3110,899,iso 1711,10102,691&3318,part, no.mdom-3641, mekaster double ended deep offset ring spanner, chrome vanadium steel, chrome plated, wave profile having a/f size (mm):41x46 confirming to, din 838, iso 3318, 10103, 10104 & 691.,part no.mdrm-4146, spanner set,double open end;size:41x46 mm;material:chrome, vanadium/carbon steel, 400 amps inverter welding rectifier.model: buddy arc 400i, make esab, l and t, ador, fontec, chain pulley block,5t,10m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:2 t;maxi lift:10 m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:3 t;maxi lift:10 m, make - indef, demag, kito, venus, self supporting extendable aluminum ladder size; 16feet(closed) to 27, feet (extended), wire rope slings with eye & eye, 25ton x 1 1/4 x 6 mtrs length., make usha martin

CTN :39983039

27 May, 2025 NA

Delhi - Delhi

Tender For procurement of spares for mirage aircraft - torque wrench tool kit, test adopter, flow meter gauge, adapter, drop tank transportation trolly, firing circuit test, cable test, oxy trolley, adapter mechanical test, wrench, oxy repleshnising adaptor, a/c harmonization, sherlock tool kit, set of pipe for pressure generator, adaptor test, case test, crane workshop, thread insert tool, screwing tool kit, contact checking tool kit, oscilloscope, p/s airtightness test set, valve releasing, hoisting assy

CTN :39085217

21 Apr, 2025 42.87 Lacs

Kharagpur - West Bengal

Tender For corrigendum : supply of watermist and caf fire extinguisher low pressure trolley mounted (v2) (q2)

CTN :39971658

23 Apr, 2025 NA

Bidar - Karnataka

Tender For providing of repair and overhauling service - trolley cabin pressure test 415 volts; trolley cabin pressure test 415 volts; yes; buyer premises

Central Government/Public Sector

CTN :39975879

25 Apr, 2025 NA

Multi City - Multi State

Tender For supply, installation & commissioning of [supply, installation & commissioning of trolley mounted high pressure hot and cold water jet cleaning machine as per technical specification attached as annexure-a, make- karcher/compac/ipc]

Central Government/Public Sector

CTN :39419593

15 Apr, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of hy8540590379 - trolley mounted high pressure stiffening unit with hawe make pump - as per spec

Central Government And Public Sector

CTN :39971199

30 Apr, 2025 NA

Kaiga - Karnataka

Tender For supply of 1. supply of seal kit for hydraulic cylinders for vanjax trolley , 2. 4 way new manifold black with double acting solenoid valve and counter balance valve , 3. 3 way new manifold black with double acting solenoid valve and counter balance valve , 4. new main control panel , 5. hydraulic hose 1500 mm long with fitting at the end for connection with tubing , 6. pressure gauge , 7. o ring kit for solenoid valve , 8. reinforcement of fittings with copper washer , 9. return line filter

CTN :39891048

16 Apr, 2025 21.50 Lacs

Sikar - Rajasthan

Tender For ???? ?????? ???? ???????? ?? ?????? ?????? ?? ???? ??????? ???? ???? ?? ????? ????? ?? ?????-providing tractor with pressure trolley and diesel driver on contract for garbage transportation

Distribution Trolley Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector