Get complete information related to latest Diving Item Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Diving Item Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Diving Item Tenders.
Tender For supply of pu pad for arm rest in non executive chair car (cc) without metal frame for vande bhar at rake-3 as per attached annexure "a" and drawing no. 3-skt-70. [ warranty period: 30 months after the date of delivery ]
Tender For providing and fixing furniture, lab equipments at newly constructed veterinary dispensary dharampur, dist-valsad-gang seater providing & supplying of gang seater(three seater) made out totally of 16swg perforatedsteel sheet and back and framing stainless steel 15mmcrc pipes structure of required shape, resting on 50mmcrc pipes as per image and directed by the architectand approved by the engineer in charge.1.00 no 9595.00 9595.002 executive table providing & supplying executive tablehaving size of 1800 mm x 750 mm table top with 25mm pre laminatd board top with edge pvc beading inframing & leg support with plb laminated with drawersand filerack etc. complete with necessary fixtures &fasteners of standard make as per detail drawing andimage approved and as directed by the architect andapproved by the engineer in charge.1.00 no 24745.00 24745.003 executive high back chair providing and supplyinghigh back chair made out of aluminium die cast in 5pronged base, polyester mesh in back with pu lumbarpad which can be adjustable by the user, high densityinjection molded pu with leather upholstery in seat panwith center tilt mechanism with pu padded heightadjustable arm rest. the height adjustment of the chairshould be done with gas lift with 100 mm travel for quickand comfortable height adjustment. it should bemaintenance free and should be tested for over 50,000cycles using stringent quality assurance system. the gasused in the cylinder should be non-toxic, non-flammable.the tilt mechanism should made up of cold-rolled carbonsteel sheets as per technical specifications mentionedabove. the mechanism should be with 4 position lockingmechanism. polyurethane armrests confirming to isstandard and fabric as per the technical specificationsmentioned above should be provided in the chairs etc.complete as per chair of approved hb, as per image andas directed by the architect and approved by theengineer in charge.1.00 no 12625.00 12625.00shedule b page 1bill of quantitiesitemsno.description of item (with briefspecification and reference to book of specifications)quantity unit rate infigures rs.amount1 2 3 4 5 64 providing & supplying conference room mid backchair seat size 21" w x 19 " d seat height 19" d x 22" hoverall : dimensions 21" w x 19" d x 34" h, soft pvcmaterial fabric, normal padded seat & back. foammoulded seat. hight quality pp arm rest. high gaugestainless steel base of nilkamal brand or equivalent.product name:- nilkamal contract 02 soft pvc with arm,black. as directed by architect and approved by theengineer in charge.9.00 no 3232.00 29088.005 s. s. dustbin providing & supplying s. s. perforateddustbins having size of 8 in. diameter & 12" height etc.complete as per image & directed by the architect andapproved by the engineer in charge.2.00 no 1100.90 2201.806 providing & supplying and fixing magnetic whiteboard/ marker board for office, home & school , heavy-dutyaluminium frame, 5x4 feet with decorative alluminiumborder with 2-way hanging options having size of 1500(l) x 1200 (w) complete with all necessary fixtures &accessories as per image and directed by the engineer incharge.4.00 no 6262.00 25048.007 providing and fixing computer table with withkeyboard slider and cpu rack and antiskid leveller atthe bottom, wooden texture smooth/matte finish, make:-particle board (high grade prelam engineering woodwith natural wood grain finish), 103d x 40w x 72.5hcentimeters dimensions, etc. as directed byarchitecture and engineer in-charged.4.00 no 7272.00 29088.00shedule b page 2bill of quantitiesitemsno.description of item (with briefspecification and reference to book of specifications)quantity unit rate infigures rs.amount1 2 3 4 5 68 mid back chair providing and supplying mid back chairmade out of aluminium die cast in 5 pronged base,polyester mesh in back with pu lumbar pad which can beadjustable by the user, high density injection molded puwith leather upholstery in seat pan with cen
Tender For e-bid for the finalization of rate contract for the procurement of diagnostic & therapeutic items for cardiac cath lab for the year 2025-27 group -b - ecg electrodes of high quality material to minimize interference and signal distortion during prolonged cardiology procedurest (fda/ce approved), manifold with two side ports for ptca (fda/ce approved), manifold with three side ports for ptca (fda/ce approved), teflon coated guide wires (j-tip & straight-tip) standard length-145 or 150cm (fda/ce approved), teflon coated guidewires(j-tips & straight-tip) exchange length-260 or 300cm (fda/ce approved), trans femoral introducer sheath with mini guide wire and puncture needle (fda/ce approved), long introducer sheath (20-50cm long) (fda/ce approved), extra-long introducer sheath (>50 cm) (fda/ce approved), trans radial introducer kit with mini guide wire and puncture needle (fda/ce approved), trans radial coronary diagnostic catheter (fda/ce approved), syringe for pressure injector-150ml with pressure tubing compatible with the available system in the cath lab (medred-mark-7) arterion, high pressure connecting tubing up to 50 cms long for pressure syringe, act cartridges compatible with the available machine in the cath lab (sonoclot-sienco-inc. & medtronic), diagnostic coronary angiography catheter(judkins type-left and right) (fda/ce approved) all sizes, diagnostic coronary angiography catheter(amplatz type-left and right) (fda/ce approved) all sizes, pigtail catheters (fda/ce approved), short pigtail for pericardiocentesis, diagnostic multipurpose catheters (fda/ce approved), nih catheter (fda/ce approved), ima catheter (fda/ce approved), ptca inflation device-analog display (balloon inflation device analog display, 30 atm pressure with tubing and 3 way stopcock) (fda/ce approved), y-connector set with extension tubing tuohy burst, pci needle and 3-way, special y-connector set with both fixed and haemostatic valve with upto 10 fr inner diameter, pci needle with/without torquer device, disposable plastic sterile luer lock syringer for angiography and ptca (leur lock), large lumen ptca guiding catheters of 5 to 8 fr sizes-fda approved, large lumen ptca guiding catheters of 5 to 8 fr sizes-ce approved, brk needle (fda/ce approved) for paediatrics/adults, patch electrodes for defibrillation compatible with the available machines in the cath lab(nihon-cohden & lifepack-20, iabp balloon catheter (fda/ce approved) compatible with the available machine (maquet) in cathlab, embolic protection (distal protection) device (epd) for ptca (fda approved), embolic protection (distal protection) device (epd) for ptca (ce approved), manual thrombosuction catheter for ptca (fda approved), manual thrombosuction catheter for ptca (ce approved), radial artery compression device, cross over arterial sheaths(fda approved), snare loop (fda approved), snare loop (ce approved), micro grabber (fda approved), micro grabber(ce approved), intra vascular retriever snare of various sizes with single foldable loop, intra vascular retriever snare-two loops (gooseneck type), intra vascular retriever snare-three or more loops (gooseneck type), pericardiocentesis kit (fda/ce approved), pigtail catheter with multiple markers (fda approved), rotalink plus system, rotalink pro system, rotalink guidewire, intracoronary pressure wire (ffr) for ptca-compatible with abbott vascular, ivus catheter for coronary interventions compatible with abbott vascular, ivus hd compatible catheter for coronary interventions, pharmacological hemostasis topical dry pad/bandage based mechanism, micropuncture needle with stainless steel guidewire for adults, paediatric & neonatal use, micropuncture needle with hydrophilic guidewire for adults, paediatric & neonatal vascular access, introducer sheath for use in neonates, mullins sheath with side arm (4-14 fr), percutaneous transluminal valvuloplasty balloon (compatible with 5 fr-7 fr, 0.018-0.035 inch wire) with app
Tender For corrigendum : repair and maintenance of furniture - gaslift assembly , arm rest pu d type , arm rest pu old model type , low tilt mechanism , castor 16 mm , seat and back connecting bracket , revolving base 5 wing pedestal , seat and back upholstery of high back , seat and back upholstery of mid back chairs , seat and back upholstery of visitors chairs , replacement of good quality chrome plated handles for storewel or almirah , fitting of provision for padlock heavy duty s.s alongwith branded good quality pad locks for storewell or almirah , hard ware kit net or bolt or washer, seating plate etc for cantee chair, servicing and greasing , labour or service charge for one service mechanic for one day or during office hours , refurbishment of 3 seater sofas , refurbishment of 2 seater sofas , refurbishment of single seater sofas , repainting of steel cupboards with 4 shelves and replacement with new key sets
Tender For supply of labour charge for complete vehicle drain out and refiling of engine oil comma , engine oil , diesel oblique fuel filter , oil filter , coolant water , steering oil , brake oil , clutch oil , air filter , labour only for dismantling and overhauling of front suspension and repair oblique replacement , stabilizer linkage , suspension metal busing kit , suspension rubber bush kit , tie rod end set , upper arm boll joint set , lower arm boll joint set , center drag link rod assy , labour charge for complete dismantling of four wheel for alignment and wheel balancing and refixing the same , labour only for complete servicing and overhauling of brake system , rear break liner set , rear break liner lock kit , fr break pad liner set , rear wheel cylinder kit , labour charge for complete dismantling of fuel tank and refixing the same after cleaning all as directed by eic , labour charge for complete dismantling of propeller shaft assembly and refixing , labour charge for complete dismantling of steering and repair replacement of worn out spares cost of spare paid separately , steering center line assembly , steering center pin kit , labour charge for complete servicing repair of dash board hanging parts , labour for complete checking of wiring harness , head light assembly halogen bulb , indicator light bulb , indicator light cover box , labour charge for checking tightness of oil bolts and nuts comma cracks and signs in differential housing , labour charge for dismantling the silencer from the vehicle cleaning the same , silence packing , silence rubber , mufflar assembly , tail pipe , labour charge for servicing of radiator assembly and water pump assembly , radiator hose pipe set , radiator hose clip with locking , water pump assembly , labour charge for complete servicing of door , m and l for servicing washing and greasing of vehicle
Tender For corrigendum : supply of boq1 boq1 - the overall size of chair shall be : width 660mm , depth 660mm & height 1250 to 1350 mm. seat size shall be : width 490mm, actual depth520mm, effective depth 430mm and height 475mm to 575mm. width of the back shall be 425mm at bottom & lumbar level 440mm & min480mm at shoulder level. back height shall be 690mm as measured from seat level. the chair shall be supplied with high quality mesh at theback. back outer shall be injection moulded with nylon gf30% material. seat should be made up of foam pre moulded at 55 kg/m3 density &hardness of 25+ 3kgf at 50% deflection conforming to is 3400.the chair shall be supplied with dynaflex two piece back construction withis20d mesh upholstred. back shall be provided with 260mm width, 160mm height and 50mm height adjastable headrest thickness of seatfoam shall be 55 mm. seat shall be upholstered with micro fabric 100% polyster 180 gsm having abrasion > 50000 cycles fire rated fabricconfirming to bs en 1021. plywood used shall be 12mm thick 9 ply hot pressed. the chair should be provided with synchro tilt mechanism(bio snchyro mechansim) allowing 360 degree revolving movement along with height adjustablility & tilt tension. the mechansim shall allowseat to back recline ratio of 2:5. the gas lift used shall be class 4 tested as per ansi bifma standards. height adjustable arms to be proviedoperated through button made of delrin p 500. arm pad material shall be polyurethane with 2mm metal insert. nylon base having pcd of660mm five pronged base made up of pa6, 30% glass filled reincforced with bottom ribbing to be provided. 50mm dia twin castors with pa6material to be provided.tolerance of +/- 5mm to be considered for product sizes i.e length, depth & height and tolerance of 5% to beconsidered in pipe thickness & pipe sizes. , the overall size of chair shall be, total height 855mm, width 620mm,depth 550mm, seat depth 470mm seat width 475mm seat to back height440 and back width shall be 460mm. seating height shall be 460mm.seat should be made up of foam pre moulded at 55 kg/m3 density.hardness of 25+ 3kgf at 50% deflection conforming to is 3400. seat shall be uplhostered with micro fabric 100% polyster 180 gsm abrasion >50000 cycles. no flamming or progressive smoldering within one hour of placement of the cigarettes. fire rated fabric confirming to bs en1021 (match) should be used.the back frame design shall be made from 14g bright steel rod in an exclusive profile for sturdiness andergonomic comfort. the steel frame shall be powder coated to 40-50 microns. the back frame shall offered in special mesh finish in black &grey finish. upholstered with an-70 (black) / an-75 (grey) mesh. special design mesh 100% polyester with 320 gsm. abrasion resistance ->50000 confirming to iso 12947-2. chair shall have fixed armrest with size of 190mm made of with nylon 30% gf.the frame shall be made outof erw tubes with 25 mm diameter with 2.1 mm thickness pipe conforming to is 4923. frame shall be welded by co2 welding process foruniform finish conforming to is 816.frame shall offered with powder coat finish to provide an attractive finish. it shall be in black colour. thepowder coating pre-treatment shall carried out with three in one chemical. after pre-treatment process, the components shall powdercoated for better adhesion of paint. the frames shall powder coated with epoxy polyester powder to the thickness of 40-60 microns as per is101 and oven baked at 180.leg bush shall be provided molded with ppcp.tolerance of +/- 5mm to be considered for product sizes i.elength, depth & height and tolerance of 5% to be considered in pipe thickness & pipe sizes., the overall size of the centre table shall be dia 600mm, 450 mm height. the table top shall be made up of 18mm thick prelaminated particleboard of approved shade all the edges of discussion surface shall be provided with machine pressed 2mm thick pvc lipping glued withhotmelt eva glue