Get complete information related to latest Dixon Angle Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Dixon Angle Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Dixon Angle Tenders.
Tender For supply of mechanical items for various tubewells installed at loknayak puram, bakkarwala. - supply of gi pipe 50 mm dia, medium class with gi flange welded on both sides, each pipe 3mtr. long with threading work on each side of pipe, each flange should have 4 holes and cut for submersible cable. make: jindal / tata or any other make approved by djb., supply of gi tail piece medium class 0.5 mtr. long inclduing one end flanged and the other end threaded of 50 mm dia., supply of ms clamp 8 mm thick suitable for 8 inch bore dia, complete with nut and bolts and washers for holding the 50 mm dia pipe including bending and shaping etc. as required., supply of gi bend 50mm dia 90 deg. double flange. heavy class, make: ganesh / jindal/ tata / isi, supply of 6 mm thick steel wire rope to hold the pump., supply of required off size threaded nut bolts and washers of good quality., supply of ms bore cover 4 mm thick suitable for 8 inch bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 50 mm dia hole in the center., supply of neoprene rubber packing 3 mm thick, suitable for 50 mm bore pipe and having 4 holes for nut / bolts.
Tender For supply of steel chequered plates as per is 3502 (unit - mass) (q3) , hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)
Tender For supply of 28 mm alloy steel grade 80 double chain sling with oblong link (56mm dia x 400mm i/l x 25 0mm i/w) at the top and eye hook at each bottom, sling jointed with indlocks. effective length 8.0 meters, safe working load 35 mt, 90% b0 angle as per drawing ic/h2-ibe/80/28-8.00 m, drawing enclosed. make: felix / spec / rail tech / usha martin or similar for the maintenance of 140te bd crane. note equivalent m ake supplier should produce their past performance certificate. [ warranty period: 30 months after the da te of delivery ]
Tender For renovation of labs and toilets in aecs 1 in senior secondary and primary section at jaduguda - demolishing cement concrete , dismantling tile work in floors and roofs , dismantling of flushing cistern , dismantling doors, windows and clerestory windows , providing and laying plain cement concrete , providing and laying in position reinforced cement concrete work , providing and laying steel reinforcement for r.c.c. work , providing and fixing centering and shuttering , providing 15 mm thick cement plaster , providing and fixing ist quality ceramic glazed wall tiles , providing and laying vitrified tiles in different sizes , providing and applying two coats of white washing , providing and applying one coat of cement primer , providing and applying wall painting with acrylic emulsion paint , supplying and laying two or more coats painting with synthetic enamel paint , providing and fixing factory made isi marked steel glazed doors ,windows and ventilators , providing and fixing 35mm thick isi marked flush door shutters , providing and fixing isi marked oxidised m.s. handles , providing and fixing oxidised m.s. casement stays , providing and fixing water closet squatting pan , providing and fixing white vitreous china pedestal type water closet , providing and fixing isi marked oxidised m.s. tower bolt , providing and fixing glass panes , white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps. , white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer , providing and fixing 15 mm nominal bore c.p brass angle valve for basin mixer and geyser points , providing and fixing c.p. brass stop cock , providing and fixing c.p. brass bib cock , providing and fixing 600x450mm bevelled edge mirror of superior glass , providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats , providing and fixing 600x120x5 mm glass shelf with edges round off , providing and fixing c.p. brass toilet paper holder , providing and fixing c.p. brass shower rose with 15 or 20mm inlet , providing and fixing one piece construction white vitreous china squatting plate , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin , 15 mm dia nominal bore , 20 mm dia nominal bore , 25 mm dia nominal bore , 75mm dia sand cast iron s and s pipe , 100 mm dia sand cast iron s and s pipe , half brick masonry with common burnt clay , providing and fixing 18 mm thick granite of any size,colour and shade , providing and fixing 10 mm thick acid and or alkali resistant tiles , providing and fixing 25mm thick cup board shutter isi marked , providing and fixing 15 mm nominal bore c.p. brass long body bib cock , providing and fixing white vitreous china laboratory sink , structural steel work in single section, fixed with or without connecting plate
Tender For supply of tools and plants for transmission line erection - 16mm dia poly propylene rope bundle of 220 meters , 20mm dia poly propylene rope bundle of 220 meters , 24mm dia poly propylene rope bundle of 220 meters , d shackles of 5 t capacity , d shackles of 6.5 t capacity , d shackles of 10 t capacity , close type single sheeve pulley 5 ton capacity suitable for 12 mm steel wire rope , open type single sheeve pulley of 5 ton capacity suitable for 8 to 12 mm steel wire rope , single sheeve pulley-open type of 5 t capacity suitable for 24 mm dia poly propylene rope , two sheeve pulley block 2 nos. per set suitable for 20 mm dia poly propylene rope having 5 t capacity , tarpaulin of size 6m x 6m , angle cutter motorized with 12 nos. of spare blades , cutting blade , nylon or polyster sling of 1.0 meter- 5 ton capacity , nylon or polyster sling of 2.0 meter-5 ton capacity , nylon or polyster sling of 3.0 meter-5 ton capacity , double ply polyester webbing sling of 2.0 meter- 5 ton capacity
Tender For bid to ras repairing of tower window split ac - servicing of 1.5, 2.0 tr window a.c. units , installation of 1.5, 2tr window type a.c. in the existing window , repairing and testing of 1.5, 2.0 tr capacity window ac units removal of leakage , replacement of 1 8 hp double shaft fan, blower motor , providing and fixing of 3mm thick ply wood in the existing window , supplying fixing of running capacitor 45 mfd 50mfd , supplying fixing of pcb repairing for remote control , supplying fixing of sitc of new pcb for remote control , supplying fixing of thermostat , supplying fixing of condenser fan blade , supplying fixing of 15,16 amp. pin plug top , supplying fixing of starting capacitor 120 150 mfd , supplying fixing of copper wiring kit , supplying fixing of synthetic filter , supplying fixing of blower for window ac , supplying fixing of selector switches , supplying fixing of starting relay , s fixing of 3 core 2.5 sqmm grade pvc insulated copper flexible cable , replacement of cooling coil 1.5, 2.0 tr window ac unit , replacement of condesnsing coil of existing 1.5,2.0 tr window ac unit , supply fixing of remote hand set , replacement of 1.5 tr capacity rotary sealed compressor , replacement of 2.0 tr capacity rotary sealed compressor , replacement of 1.5 tr capacity reciprocating hermetically compressor , replacement of 2.0 tr capacity reciprocating hermetically compressor , dismantling 1.5tr,2tr window ac unit , dismantling 1.5tr,2tr split ac unit , itc of 1.5, 2.0 tr split ac units at desired location , servicing of 1.5,2.0 tr split a.c. units , repairing and testing of 1.5,2.0 tr capacity split ac unit , replacement of 1 by 8 hp condenser fan motor , replacement of 1 by 4 hp condenser fan motor , replacement of 1 by 35 hp indoor blower motor , replacement, fixing of copper wiring kit , replacement , fixing of condensor fan blade , replacement fixing of pcb repairing for remote control , replacement,fixing of sitc of new pcb for remote control , replacement, supply, fixing of remote hand set , s, fixing 20 mm dia pvc drain pipe in recess , sfixing pvc flexible pipe to cover the refrigerant pipes , pdg. and installing size 22 gauge of 1 4 inch size nominal dia , pdg. and installing size 22 gauge of 5 8 inch size nominal dia , replacement of condesnser coil 1.5, 2.0 tr split ac unit , replacement of cooling coil 1.5, 2.0 tr split ac unit , replacement of existing faulty, unseriviceable 1.5 tr indoor units , s fixing of ms frame a 40mmx40mmx5 mm ms angle iron , b 40mmx5mm ms flat , sfixing of powder coated prefabricated wall floor mounting stand , repairing of inveter type split ac a 1.5 tr inverter sac pcb card , b 1.5 tr inverter sac outdoor motor , c 1.5 tr inverter sac indoor motor , shifting and reinstallation of 3 phase tower type split ac unit , sitc of vaccumization and nitrogen testing a 12.7 mm dia. , b 19.10 mm dia. , sfixing of control cum transmission wiring a 4c x 4 sqmm , sfixing of pvc insulated pvc sheathed copper conductor , sfixing fp sheet steel 25 32 a 415 v c curve fp mcb , minor civil existing brick stone rcc wall having approx. thickness of 1 metre for fixing , providing and filling of refrigerant r 410 r 32 as required gas , pfixing of gi frame tray of 24 guage of size 3feetx1.5 feet , supply and fixing of ac changeover sequence
Tender For supply of trummer 6 and 8mm carper specifiation not avalilable , router para 12 flr specifiation not avalilable , xpt 454 jig saw 65mm new specifiation not avalilable , kbs 731 planner 82mm specifiation not avalilable , maf combination square 12 inch 300 specifiation not avalilable , xp 1144 circular saw 1400w specifiation not avalilable , velcro pad m10 swishin specifiation not avalilable , maf nylon brush yellow 4 inch specifiation not avalilable , yw adj hole saw circle cutter specifiation not avalilable , scale 39 inch steel specifiation not avalilable , quik bar camp 12 inch steel specifiation not avalilable , baby vice fix base removerable 4 specifiation not avalilable , jb hand saw 18 inch specifiation not avalilable , hole saw 8 x drills bits specifiation not avalilable , tool kit and socket carper specifiation not avalilable , jk super driver 4 inch specifiation not avalilable , maf pro 6 adjusting speed specifiation not avalilable , corner clamp 4 pcs right angle clamp specifiation not avalilable , deodap aluminum ally rafter square specifiation not avalilable , f clamp 4 pcs specifiation not avalilable , ranpra aluminum universal drill stand specifiation not avalilable , face sheld anti fogg specifiation not avalilable bid number/ & ( * ) : gem/2025/b/6286401 dated/ + : 29-05-2025 bid document/ 2 2 1 / 19