Latest dori Tenders | Government dori Tenders

CTN :38554789

02 Jan, 2025 NA

Kamrup - Assam

Tender For supply of plunger detent , spring helical extension , washer , spring pawl , link actuating plate , screw machine slotted round hd precision , nut wheel stud 7 oblique 8 bsf rh cone seating , bushing sleeve , bolt machine , bushing machine thread , spring helical compression , brg bal single thrust 150 x190 x31 mm , bearing sleeve roller traversing axle , stud plain for cap front cradle assy , thrust bearing , cover lower , cover for wheel assy , bearing needle roller journal 32x52x20mm , bush over zize , roller traversing for axle assy , scr csh hex pre stl 8.8 phos m22x85mm , handle , stay top rt , stay bottom rt , washer plain steel , pin

CTN :38597034

21 Dec, 2024 12.80 Lacs

Kupwara - Jammu And Kashmir

Tender For const of foot crossing on nalla behram dori kaniehak connect kunnardu nard at batpora b

Central Government/Public Sector

CTN :38568573

20 Dec, 2024 NA

Jhansi - Uttar Pradesh

Tender For supply of set of ptfe air pipe,id-4mm,od-6mm with end fitting, consisting of steel cone & hex nut on both ends.(working pressure-5.5kgs/cm. square and max pressure 10 kgs/cm square )with steel ni/cd plated two ado pters to suit taper cone and hex nut 8mm metric 1.25 pitch on pipe side and unc taper thread on other side to fi t in to magnet valve ge/bhel.one set consisting of (1) 26"long pipe for bkt-02 nos.(ii)14.5"long pipe for p/c-12 nos.(iii)9.5" long pipe for rev-06 nos. [ warranty period: 30 months after the date of delivery ]

CTN :38588626

03 Jan, 2025 3.00 Lacs

Amritsar - Punjab

Tender For supply of mugal shamiana with frame 20x30,outer white with frame,kanat set 20x6 ft,kannat set 30x6 ft,shamiana curtains,pole cover,curtain dori,panji

Central Government/Public Sector

CTN :38346052

18 Dec, 2024 9.81 Lacs

Haridwar - Uttarakhand

Tender For corrigendum : supply of straight coupling assembly - straight coupling assembly (fitted with ferrule and nut on both sides)with 24 deg cone angle and thread size m22x1.5 as per din 2353 for pipe dia 14 mm material carbon steel. , straight coupling assembly (fitted with ferrule and nut on both sides) with 24 deg cone angle and thread size m22 x1.5 as per din 2353 for pipe dia 15 mm material carbon steel. , staight coupling assembly (fitted with ferrule and nut on both sides)with 24 deg cone angle and thread size m24x1.5 as per din 2353 for pipe dia 16 mm material carbon steel. , straight coupling assembley (fitted with ferrule and nut on both sides)with 24 deg cone angle and thread size m26x1.5 as per din 2353 for pipe dia 18 mm matrial carbon steel. , straight coupling assembly (fitted with ferrule and nut on both sides) with 24 deg cone angle and thread size m30x2 as per din 2353 for pipe dia 20 mm material carbon steel. , straight coupling assembly (fitted with ferrule and nut on both sides)with 24 deg cone angle and thread size m36x2 as per din 2353 for pipe dia 25 mm material carbon steel. , elbow coupling assembly (fitted with ferrule and nut) with 24 deg cone angle and thread size m24x1.5 as per din 2353 for pipe dia 16mm on one side and 3/4 inch bspp thread on stud end along with suitable copper washer, material c.s. , elbow coupling assembly (fetted with ferrule and nut on both sides) with 24 deg cone angle and thread size m16 x1.5 as per din 2353 for pipe dia 8 mm material carbon steel. , elbow coupling assembly (fitted with ferrule and nut on both sides) with 24 deg cone angle and thread size m18 x1.5 as per din 2353 for pipe dia 10 mm material carbon steel , elbow coupling assembly (fitted with ferrule and nut on both sides)with 24 deg cone angle and thread size m20x1.5 as per din 2353 for pipe dia 12 mm material carbon steel. , elbow coupling assembly (fitted with ferrule and nut on both sides)with 24 deg cone angle and thread size m22x1.5 as per din 2353 for pipe dia 14 mm material carbon steel. , elbow coupling assembly (fitted with ferrule and nut on both sides)with 24 deg cone angle and thread size m22x1.5 as per din 2353 for pipe dia 15 mm material carbon steel. , elbow coupling assembley (fitted with ferrule and nut on both sides)with 24 deg cone angle and thread size m26x1.5 as per din 2353 for pipe dia 18 mm matrial carbon steel. , elbow coupling assembly(fitted with ferrule and nut on both sides) with 24 deg cone angle and thread size m30x2 as per din 2353 for pipe dia 20 mm material carbon steel. , elbow coupling assembly (fitted with ferrul and nut on both sides)with 24 deg cone angle and thread size m30x2 as per din 2353 for pipe dia 22 mm material carbon steel. , elbow coupling assembly(fitted ) with ferrule and nut on both sides)with 24 deg cone angle and thread size m36x2 as per din 2353 for pipe dia 25 mm material carbon steel. , elbow coupling assembly(fitted with ferrule and nut on both sides) with 24 deg cone angle thread size m36x2 as per din 2353 for pipe dia 28 mm material carbon steel , elbow coupling assembly (fitted with ferrule and nut on both sides)with 24 deg cone angle and thread size m42x2 as per din 2353 for pipe dia 30 mm ,material carbon steel. , equal tee coupling assembly (fitted with ferrule and nut on both sides) with 24 deg cone angle and thread size m14x1.5 as per din 2353 for pipe dia 6 mm material carbon steel. , equal tee coupling assembly (fitted with ferrule and nut on all the three sides) with 24 deg cone angle and thread size m24x1.5 as per din 2353 for pipe dia 16 mm material carbonsteel. , ferrule for pipe dia 6 mm as per din 2353 , ferrule for pipe dia 10 mm as per din 2353 , ferrule for pipe dia 12 mm as per din 2353 , ferrule for pipe dia 18 mm as per din 2353. , ferrule for pipe dia 20 mm as per din 2353. , ferrule for pipe dia 22 mm as din 2353 , straight male stud coupling assembly(fitted with ferrule and nut),type male bspp thread -metal sealing edge/24 degree

Central Government And Public Sector

CTN :38516490

19 Dec, 2024 1.40 Lacs

Jhunjhunu - Rajasthan

Tender For cottan dori & cotton wast

CTN :38523490

13 Jan, 2025 NA

Kharagpur - West Bengal

Tender For supply of hardened thread forming tapping screw (self tapping) round head cone end type, size(number) - 8 x 38 mm, gkw or similar. matl.& specn : is: 5957/2003 (2nd rev.)

Central Government And Public Sector

CTN :38526822

19 Dec, 2024 1.50 Lacs

Alwar - Rajasthan

Tender For manila rope cotton dori cotton west

CTN :38406686

18 Dec, 2024 NA

Ahmedabad - Gujarat

Tender For corrigendum : e-tender for providing office stationery for the gujarat state co - operative bank ltd. (hereinafter referred as gsc bank) ahmedabad. - , register 1 quires {regular size, lazer paper in 70 gsm, with canvas binding}, register 2 quires{regular size, lazer paper in 70 gsm, with canvas binding}, register 3 quires {regular size, lazer paper in 70 gsm,, with canvas binding}, register 4 quires {regular size, lazer paper in 70 gsm,, with canvas binding}, red tag {8 inch/ 100 nos x 1 packet}, white lace {24 inch/ 100 nos packet}, voucher file, {double pare, hard board} (1x12 = 1 dozen), portfolio {with two side flap & lace, hard board}, portfolio {with four side flap & lace, hard board}, stapler{small size}, no.hd10 d metal body with plastic casting, stapler {big size} no. hp 45, stapler pin-23/8 [20 pkt x 1 box], stapler pin 23/20 [20 pkt x 1 box], stapler pin no-23/17 [20 pkt x 1 box], stapler pin {no.10-1m} [20 pkt x 1 box], stapler pin {no.24/6-1m} [20 pkt x 1 box], punching machine no. dp 280, punching machine dp 800, fevi stick- super {glue stick, 15 grm}, cello tape {white/65 mtr length/2 inch width}, cello tape {brown/65 mtr length/2 inch width}, calculator 12 digit, , box file {4 nos x 1 pkt} fs size/ cardboard, sutli (good quality), ball pen use & threw, binder clip, yellow duster, desk calendar, desk calendar refill, whitener, a4 paper, legal paper, colour paper, mouse pad, mouse usb, mpl -12 sticker, mpl -24 sticker, note pad, nylon rubber band 500gm, office paper tray, paper cutter big, paper cutter small, pencil cell aa, pencil cell aaa, pen stand, pin cushion, plastic chandani folder, plastic paper clip, plastic dori, plastic folder a/4, sticky note 1*3, sticky note 3*1, sticky note 3*3, scissor big, scissor small, self-ink stamp ink, sponge dabbi, spring file, marker pen- permanent {10 nos x 1 pkt} (blue, black, red, green), high lighter gloliter (5 nos x 1 pkt.), stamp pad (medium size) 110 mm x 70 mm, stamp pad ink 110 ml. bottle, pencil {10 nos. x 1 box} extra dark, eraser {small / 20 nos x 1 pkt}, sharpener {pencil sharpener/ medium size}, pin {solid head/ 70 gms x 1 pkt}, u-pin {100 nos. x 1 pkt x 10 pkt = 1 box}, plastic file {a/4 size}, cutter with blade size 95 mm x 18 mm {6 inch/big}, scale {stainless steel } size 30 cm h: 300 mm, w: 25 mm, thickness 0.90, white board marker, paper weight (glass) { round flower}, ohp marker pen, ball pen (between rs.5/- to rs.10/-), meeting pad

CTN :38473909

27 Dec, 2024 NA

Jhansi - Uttar Pradesh

Tender For supply of centre table glass 2 ft x 4 ft,centre table glass 20 inch x 36 inch,glass appointment board 5 ft x 3 ft,appointment board glass 4 ft x 2.5 ft,condenser,stabilizer 5kva,steel photo frame,golden dori

Dori Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector