Latest drager spares Tenders | Government drager spares Tenders

State Government

CTN :44798192

28 Apr, 2026 1.97 Lacs

Durg - Chhattisgarh

Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tendererâ€™s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tendererâ€™s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :44720098

08 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 45/5 ton eot crane with overall span of 14.160 mtrs, with electrical motors, panel boards, starters, hoists, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, dsl guard, electrical wirings,driver cabin,fan and lights attached to the crane, , cross travel dsl cables between the run way rails of the crane, 4 nos of main power collection dsl cables of the crane and other ferrous/non ferrous original attachements without hooks, snatch blocks/hook blocks and wire ropes carrying the hooks. uc no.230032002. makers name-khandelwal udyog ltd, bombay.total approximate weight 13478 kgs. [mild steel 13083 kgs, cast iron 200 kgs, copper 178 kgs, brass/bronze 5 kgs, aluminium 2 kgs, wastage 10 kgs, other non ferrous: negligible] . as is where is condition. s.1539 voucher no. 738167 dated. 07.01.25. custodian . sse / dsl shed/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taken while uprooting and lowering the crane by the purchaser. 9] ladder, pathway and its safety grill and structures carrying the main power collection cables i.e insulater brackets are not for sale. 10]. the other main power collection dsl cables of the other working crane at the same location should not be disturbed.

corporations/Associations/Others

CTN :44653168

10 Apr, 2026 NA

Osmanabad - Maharashtra

Tender For tender for supply of b.a. set with 6 nos. spare cylinders , tikav , favda , first aid box , hose pipe ss coupling & binding , hose pipe ss coupling & binding 63mm x 15 mtts. , torch , tool box , abc type fire extinguishers 4.0 kg , rope ladder 20 feet , hydraulic jack 20 ton , hand operated wood cutter petrol , hand tool kit , firefighter wear dangri , light bar siron speaker milke system , portable pump with 275 lpm , electric winch 1500 ibs 12 volt , full body safety belt , fireman helmet , fire safety shoes , nozzle gun metal 2.5 inch , folding stretcher , metal strainer , basket strainer , safety hand gloves , suction hose 100mm x 8 feet , hand operated electric saw cutter , snake catcher , hose ramp , search light (50 feet wire) , raincoat , gum boot , ceiling hook , revolving head with revolving nozzle 2.5 inch , ghal , fireman dress , manila rope 60 mtr. , floting pump , extension ladder , fireman axe , panja , life buoy , nylon rope 60 mtr. , foam compound liquid afff 3% (1 cane 20 ltr.)

Central Government/Public Sector

CTN :44670951

31 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 95.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolster spring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only

Central Government/Public Sector

CTN :44670956

31 Mar, 2026 NA

Multi City - Gujarat

Tender For corrigendum : auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 45.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolster spring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only

Co-operative

CTN :44574525

01 Apr, 2026 1.18 Lacs

Kadi - Gujarat

Tender For supply of safety wear. breathing apparatus,nh3, safety-wear,mask respirator, canister,nh3

CTN :44445368

03 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of procurement of special safety items d d - kevlar leather hand gloves , single use hand rubber gloves for chemicals handling , heat resistant latex rubber hand gloves , heat resistant aluminised shoes , aluminised apron with sleeves , blue furnace observation face shield for forge and foundry , ultraviolet excluded uvex neotherm smelter blue lens safety eye wear goggles , 3m 6800 full face mask , 3m 6200 half face mask , 3m 6003 organic vapour catridges , novanative ffp2 , ppe kit disposable

Drager Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Co-operative