Latest drainage system Tenders | Government drainage system Tenders

State Government

CTN :40516744

03 Jun, 2025 1.83 Crore

Delhi - Delhi

Tender For construction of drainage system in the green area, laying of hdpe pipe, providing and fixing of sanitary fittings, distemper and other miscellaneous works at squash and badminton stadium.

corporations/Associations/Others

CTN :40501250

04 Jun, 2025 9.60 Lacs

Delhi - Delhi

Tender For t/m of sw drain system in r-iii division during 2025-26. sh-desilting of drains and repairing of existing drainage system under the jurisdiction of sub division-iii (r-iii) moti bagh

corporations/Associations/Others

CTN :40514390

06 Jun, 2025 13.86 Lacs

Delhi - Delhi

Tender For t/m of sw drains system in r-ii division during 2024-2025. sh - de silting and repair work of existing drainage system in front of khanna market, new delhi.

Central Government/Public Sector

CTN :40474824

02 Jun, 2025 NA

Anand-Guj - Gujarat

Tender For design, supply, installation, testing and commissioning of the sub surface drainage system and land development work at malarpura, sag bidaj farm.

State Government

CTN :40514807

17 Jun, 2025 24.21 Lacs

Kanchanpur - Tripura

Tender For mtc of road from kambaltilla to anandabazar (l- 12.00km) under dasda sub-division, pwd(rnb) during the year 2025-26/ sh gsb, patch wbm-3, patch carpeting, seal coat and surface drain etc portion from ch 0.00km to ch 4.00 km.

State Government

CTN :40514809

17 Jun, 2025 24.18 Lacs

Kanchanpur - Tripura

Tender For mtc of road from kambaltilla to anandabazar (l- 12.00km) under dasda sub-division, pwd(rnb) during the year 2025-26/ sh gsb, patch wbm-3, patch carpeting, seal coat and surface drain etc portion from ch 4.00km to ch 8.00 km.

State Government

CTN :40514813

17 Jun, 2025 24.23 Lacs

Kanchanpur - Tripura

Tender For mtc of road from kambaltilla to anandabazar (l- 12.00km) under dasda sub-division, pwd(rnb) during the year 2025-26/ sh gsb, patch wbm-3, patch carpeting, seal coat and surface drain etc portion from ch 8.00km to ch 12.00 km.

State Government

CTN :40514818

17 Jun, 2025 24.03 Lacs

Kanchanpur - Tripura

Tender For fdr of different roads under dasda r.d block during the year 2025-26/ sh jungle clearance, land slide clearance, brick soling, bats filling, bamboo palasiding and surface drain etc.

State Government

CTN :40502937

16 Jun, 2025 24.24 Lacs

Kanchanpur - Tripura

Tender For maintenance of bailey bridges under the jurisdiction of damcherra sub-division, pwd r and b during the year 2025 2026 sh providing, fitting and fixing of spare parts inc welding ,land slide clearance,bamboo palasiding,and unlined surface drain etc.

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

Drainage System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors