Latest drawing material Tenders | Government drawing material Tenders

CTN :40697499

24 Jun, 2025 24.70 Lacs

Chhabra - Rajasthan

Tender For supply of spares for esp system of unit#1 to 4, ctpp, chhabra for fy. 2025-26 - inner arm assembly for cerm & eerm consistsi)inner arm half-2 nos.ii)hex bolt m16x90-1 nos.(half threaded, grade 4.6) iii) hex bolt m16x40-1 nos.(half threaded, grade 4.6) iv) hex nuts m16-2 nos.( grade 4.6) (moc en-08 for flats ) as per drawing / sample, outer arm for cerm (total weight 8kg+/-2.5-5%)i)roller wheel- 1 no.ii) arm- 2 nos.(10 mm thick flat)iii)washer- 2 nos.(45x28x3 mm)iv)pin - 2 nos.(l114xdia25mm round bar) as per drawing / sample*moc en-08 for roller wheel & pin and ms for arms & washers, sleeve bearing bracket assy. consistsi)sleeve bearing/ci liner (in two halves),c.i.fg-210 - 2nos.ii)ht hex nut+ bolt m12x50- 2nos.iii)ms strip (40x40x10)- 4 nos.iv)weld type - 6 (moc for liner set is as per is-210 fg-210) as per drawing / sample, set ring (material en-08)id-50+/-0.5mm , od-75.0m, height-18.00mm grub screw,m10x15 mm-2nos., grip coupling for eerm (moc en-08 for flat) consistsgrub screw m10x25 mm -1 no.as per drawing / sample, shaft sleeve 50 mm (en-24)inner dia -50+/- 0.5 mmouter dia-70+/- 0.5 mmlength- 130+/-1 mm thickness-10 mm,, shaft sleeve 40.5 mm (en-24)inner dia -40+/- 0.5 mmouter dia-50+/- 0.5 mmlength- 120+/-1 mm thickness-5 mm, plain bearing assembly for rapping mechanism consistsi)lower half -01(is-210-fg 200)ii) upper half -01 01(is-210-fg 200)iii)hex bolt m16x120 mm-02 nos (4.6 grade half threded)iv)hex nut m16 -02 nos.( 4.6 grade)*casting must be free of all kinds of casting defects., top sleeve for emmiting shaft dia.40 mm (material en-8), end shaft for cermdia 50mmlenth : 790mmhole dia 17mmmaterial : en-8 as per drawing / sample, gd screen material as per is 513,crca sheet 2.5mm (as per drawing),material of hook ms, 4.00mm thick, emitting rapping shaft i, emitting rapping shaft ii, emitting rapping shaft iii, c.i. liner in two halves (moc as per is 210 fg 210), shock bar guide angle, u-guide/clamp for collecting electrodes, material - cold rolled ms sheet is 513, 2.50 mm thick or as per drawing/sample, screen tube for emmitting drives of esp, material - ms sheet 5.00 mm thick or as per drawing/sample, item should be painted with red oxide inner/outer side

Central Government/Public Sector

CTN :40682303

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of stainless steel tubes and double ferrule fittings for lhb ac 2 tier coaches., as per drawing: material schedule as per set list no rcf/md/mat schedule/lwaccw version 00 with design correction slip cs-01 dated 10/04/2025, [ warra nty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40645997

17 Jun, 2025 19.97 Lacs

Calcutta - West Bengal

Tender For supply of 9x12x1 single part blank continuous stationery customised , 9x12x 2 two part blank continuous stationer customised , 15x12x1 single part blank continuous stationery customised , policy bag docket form no. 4111 customised , policy loan bag size 170 mm x 365 mm when closed and 165mm x 400 mm customised , death claim docket size 13.5 x 9.5 customised

Central Government/Public Sector

CTN :40621629

10 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply , installation, commissioning & testing of stainless steel tubes and double ferrule fittings for lgs coaches. note:-installation charges are to be given/qu oted separately., as per drawing: material schedule as per set list no. rcf/md/mat sch/lgs , ver 01 with design correction slip no.-01 & 02 dated 02/04/2025 & 08/04/2025 respectively. seperate packing of furnishing and bogie items (furnishing items:- set list items group a , b, c & d. bogie items:- set list items group e, f & g), packing instruction: no special packing required. the protruding, threaded portion, gauges and loose items etc. if any are to b e protected with suitable covering to prevent it from damage. however transit damag e if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delive ry ]

CTN :40210193

16 Jun, 2025 NA

Indore - Madhya Pradesh

Tender For corrigendum : annual rates for supplying of items for stationary samagri for financial year 2025-26 at nagar parishad rau distt. indore . -water tax recovery book, property-consolidated tax recovery book, registration books, miscellaneous recovery books, thea miscellaneous recovery books, market meeting recovery book, income release books, entry receipt books, khuta tax book, budget book, income-expenditure account, accountant's book big & small, career's book big & small, cmo ledger, income khatoni, expenditure khatoni, file cover thin & lease, file cover thick & lease, voucher form, action sheet main copy, action sheet continuous copy, tractor lock book, store register, incoming register, outgoing register, daily collection register, water tax register, gumti rent register, property tax-consolidated tax register, plain register 1 sheet, plain register 2 sheet, letter pad big, letter pad small, anusa certificate, plain paper full size, plain paper half 1. paper bagasse 250 gm, gum paste 700 gm, file laces per second, file tags per second, good quality pins per kilo, carbon core per packet, carbon core double per packet, stamp paid core per piece, muster form per second, demand bill per second, rain card form single per second, rain card form bundle per second, rain card per second, paper a-4 size per packet, paper a-3 size per packet, paper legal per packet, paper a-5 packet, photo copy machine powder per packet, photo copy machine drum per piece, printer powder per packet, printer drum per piece, attendance register per piece, invitation card with envelope per second, certificate per second, flex printed bill form per second, plastic file per piece

CTN :40572403

01 Jul, 2025 10.00 Lacs

Satna - Madhya Pradesh

Tender For stationery material - miscellaneous receipt book (200 in duplicate) 18x22/16, miscellaneous receipt book (200 in duplicate) 18x22/24, municipal tax fee and water tax receipt (200 in duplicate) 18x22/12, register 16x26/4, 100 pages, register 16x26/4, 200 pages, register 16x26/4, 300 pages, register 16x26/4, 400 pages, register 16x26/2, 100 pages, register 16x26/2, 200 pages, register 16x26/2, 300 pages, register 16x26/2, 400 pages, register 16x26/2, 500 pages, register 20x30, 100 pages, register 20x30, 200 pages, register 20x30, 300 pages, register 20x30, 400 pages, register 20x30, 500 pages, notesheet continuous forms & other forms double side printing 17x27/4 (green ledger paper), forms single side printing 16x26x8, letter pad 16x26x8 , 100 pages, measurement book full size , 100 pages, measurement book half size , 100 pages, banner / flex printing with frame, banner / flex printing without frame, pamphlet form, pune book, incoming-outgoing register 20x30, 200 pages, paper photocopy a4 size 75gsm , 10 pack, glossy paper 150 mm, carbon single core, plain register - 01 no., plain register - 02 no., plain register - 03 no., plain register - 04 no., plain register - 06 no., plain register - 08 no., plain register - 10 no., paper pin 10 no super quality, stapler big size, stapler small size, stapler pin all size, envelope khaki 9x4, per 100 piece, envelope khaki 10x5, per 100 piece, envelope khaki a4 plastic coated, tag big super quality, tag small super quality, ink pad, whitener super quality, 10 piece, marker pen per 10 piece, flie cover super quality printed, flie pad super quality printed, flie pad foldar super quality printed, voucher file super quality, torch cosmos big size, stamp pad all size, lock aligarh small, lock aligarh medium, lock aligarh big, pencil 10 pieces, pencil eraser 10 pieces, glue 200 ml, glue 700 ml, stock register seal, tavil cloth khadi 2 meter, calculator all size, attendance register 4 dimensions

Central Government/Public Sector

CTN :40434732

14 Jun, 2025 40.00 Lacs

Kishangarh - Rajasthan

Tender For supply of lab furniture of central instrumentation facility, central university of rajasthan - wall mount cabinets with metal door, sefa-8 standards heavy duty wall mount cabinets: sefa-8 standards heavy duty cabinet body shall be in 1.2mm thick material of construction: 1.2 mm gi sheet with ss 304 hinges and handles. epoxy powder coating of 60 -80 microns. - size - 600mmlx450mmdx750mmh. provison of lock is required. these units will be fitted in the service areas of the drawing., under bench storage units (qty as per drawing)sefa-8 standards heavy duty under cabinets & drawers: sefa-8 standards heavy duty under module (cabinet body shall be in 1.2mm thick and drawer front & shutter shall be in 1 mm thick), the cabinet should have adjustable height shelf. the storage cabinets should be made of crca 20 gauge. (tata/ jindal/sail/jsw in panel construction. cabinets should have sandwitched doors & drawers filled with pcapsal sheet should be lined on the edges of doors and drawers for sound deadning. the cabinets should be interconnected with spacer which strengthens over all structure of the table / bench. ss fasteners should be used at exposed area inside the cabinets.. the drawer glides should be telescopic glides which gives strength with smooth movebase cabinet of 600 mm with 1 drawer & 2 shutter with lockbase cabinet 750mm with 1 drawer & 2 shutter with lockbase cabinet 900w 1 drawer & 1 shutter with lockbase cabinet 450mm 1 drawer & 1 shutter with lock, modular sink unit ( corner unit )specification of material of construction is same as under cabinets. the front panel should have single door with handle. sink bowl and bottle trap should be of polypropylene. one way ss faucet., filler panels (qty as per drawing)specification of material of construction is same as under cabinets., frame assembly for wall cabinet bench (qty as per drawing)material:steel tubing, of hollow sections conforming to standards is code:square pipe with a cross-section of 30mm x 30mm and a minimum thickness of 1.2 to1,6 mm. finish: powder coating: highly corrosion-resistant epoxy powder coating, typically 60-80 microns thick,, with pre-treatment for better adhesion. .legs:adjustable levelling feet: required for uneven flooring, typically with a tolerance of -5mm to +20mm., 17mm (+/-1) thick black granite (qty as per drawing), garment locker1000mmlx450mmdx2100mmh, made of ss 304, thickness of sheet is 1.2 mm and finish is matt. total 9nos. of lockers of equal size is required with provision of lock., shoe rack 1200mmlx300mmdx600mmh - two tier ss 304 shoe rack. made of 30mmx30mmx1.2mm pipe., hardware fittingsa) hinges :- hettich/haffele/godrej.b) handle :- ss304 matt finish d handle / aluminium flush handle.c) screw :- all s.s. 304 visible screws.d) lock :- hafele / hettich / godrej make with pair of keys. e) drawer channel :- hettich / ebco / haffele make telescopic drawer slides 45kgs

Drawing Material Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector