Latest drill hiring Tenders | Government drill hiring Tenders

Central Government/Public Sector

CTN :38208823

09 Dec, 2024 NA

Bengaluru - Karnataka

Tender For supply, installation and commissioning of automatic scada based full rake test rig for for i cf andlhb coaches as per the enclosed specification/scope of work. [ warranty period: 24 months after t he date of delivery ]

Corporations And Associations And Others

CTN :38185716

20 Nov, 2024 69.34 Lacs

Saharanpur - Uttar Pradesh

Tender For construction of 03 nos. rebore tubewells by d.c./r.c. rig machine and its other associated works complete in saharanpur city under deposit work at ward no.-39 sitapuri,ward no.- 40 nagar nigam campus and ward no.- 40 near gandhi park bus stand

Central Government/Public Sector

CTN :38209116

05 Dec, 2024 NA

Jaipur - Rajasthan

Tender For supply of computerized single car test rig(sctr) specification as per attached annexure - a . [ warra nty period: 48 months after the date of delivery ]

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government/Public Sector

CTN :38192457

26 Nov, 2024 NA

Mehsana - Gujarat

Tender For fabrication and repair work of different equipments parts and accessories for work over rigs of well services mehsana asset - repair of fire pump shaft with key insert slot, fabrication of cardan-propeller shaft assy. (approx. 3 inch dia hollow) of pto draw works of cw-50, fabrication of chain cover of draw works for a50 work over rigs, fabrication of base plate of starter of fire engine, fabrication of wash pipe of mud swivel (10mb and ch60) for c/w-50 & rom-50 work over rigs, repair of 03 nos. of 3pp mud pump flange, repair of both the bop pneumatic console on rom-50 and cw-50, fabrication of brake calliper shaft (02 qty on each rig) assemblies and hydraulic lines for upets rigs, fabrication of axle hub sun gear assembly cw-50-iv

Central Government/Public Sector

CTN :38197041

04 Dec, 2024 NA

Panvel - Maharashtra

Tender For supply of unitized mud cleaner (1200 gpm) for offshore drilling rig with installation and commissioning , unitized mud cleaner (1200 gpm) for onshore drilling rig with installation and commissioning , shale shaker (1500 gpm) for onshore drilling rig with installation and commissioning

State Government

CTN :38206328

30 Nov, 2024 21.37 Lacs

Kolkata - West Bengal

Tender For sinking of deep tube well 300mm x 200mm dia of 150 m depth by rig boring method either by reverse or by direct rotary rig in place of abandoned tube well at peyarabagan in ward no. 09 and udayrajpur ghoshpara ward no. 12 under madhyamgram municipalit

CTN :38185248

02 Dec, 2024 NA

Delhi - Delhi

Tender For tender for supply of hal1640i/02 mgb flushging rig , armor tape 5 30 adjustable wrench 5 18mm , 8810048004 wrench 10mm qty 1 , 8810254005 wrench 12 mm qty 1 , 464 3 1/ca142 kt1ga primer surface hi built epoxy , wsrsrc1000001 501 adjustment tool set , tz 335 black tape , 5g(2126) tester bounding type b , 6840 000018 cresoil liquid black

CTN :37931235

15 Nov, 2024 NA

Kolar - Karnataka

Tender For bid to ras supply of up gradation of existing bd355 tcv test rig with vfd modulation-lump sum material charges incl gst, , installation and commissioning lump sum service charges incl gst

CTN :38190988

19 Nov, 2024 NA

Multi City - Multi State

Tender For supply and commissioning of single wagon test rig complete conforming to the schematic l ayout for swtr. drg no 3kb 1944 along with all accessories viz annexure- 'a'. make : escorts. [ warrant y period: 30 months after the date of delivery ]

Drill Hiring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government