Latest drill machine hiring Tenders | Government drill machine hiring Tenders

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

CTN :39545368

13 Mar, 2025 10.12 Lacs

Bardhaman - West Bengal

Tender For drivage in stone roof along minus 2 level from 39 dip to 42 dip of rvi seam at mic of jhanjra project colliery - drivage in stone roof along -2level from 39 dip to 42 dip of rvi seam at mic of jhanjra project colliery, drilling and blasting in soft stone including drilling,blasting, dressing & cleaning up to 15m etc., roof/side bolting including carrying of materials,drilling & grouting etc. 55/1.2 = 45.83 (say) = 46 rows x 4 = 184 nos, total impact of gst for the purpose of ctc

State Government

CTN :39510633

17 Mar, 2025 23.54 Lacs

Ahmedabad - Gujarat

Tender For tender for drilling 200 and 250 mm dia. up to 300 meters (total 08 numbers) dr bores by dr drilling rig including supply of various types of ms bore materials & slotting work of ms erw pipes & installation ,testing & commissioning of three phase sub. pump set with required accessories in 200/250 mm dia bores at various villages in various talukas of kheda district on as and when required basis for the period of one year.

Central Government And Public Sector

CTN :39518383

24 Mar, 2025 14.27 Crore

Chengalpattu - Tamil Nadu

Tender For supply of electrical equipments and installation works of electrical and instrumentation system for oesc at maps site - supply of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, washer for shear bolt, nut for shear bolt, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, installation of cable tray supporting structure including site works such as cutting, drilling, threading, welding, fixing the hardware, touch up painting using zinc rich paint for welded surfaces etc., as per the specification, cable installation note, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/2002, 2003 & 2004/dd, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 150 mm width, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 300 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 150 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 300 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 150 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 300 mm width, common cable tray and ventilation duct support for supporting 1 tier of straight tray or elbow of 150 mm width, cabling systemsupply of following sizes of 6.6kv/11kv rated, al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed, gi wire/ strip armoured power cables along with steel cable drums, 3cx185 sqmm armoured cable, supply of following sizes of 1100v rated, cu/ al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed power cables along with steel/ wooden cable drums, 3.5cx400 sqmm, al conductor, armoured cable (gi armour) with steel cable drum, 3cx2.5 sqmm, cu conductor, un-armoured cable with wooden cable drum, supply of following sizes of 1100v/ 650v rated, cu conductor, pvc (type-a) insulated, overall screened, frls pvc (st1) inner and outer sheathed, gi armoured control cables along with steel/ wooden cable drums, 4cx2.5 sqmm, 1100v rated with wooden cable drum, 2cx2.5 sqmm, 1100v rated with wooden cable drum, 4cx10 sqmm, 1100v rated with steel cable drum, 2cx10 sqmm, 1100v rated with steel cable drum, 10px1.5 sqmm, 650v rated with steel cable drum, supply of following medium duty gi pipes/ heavy duty erw rigid conduits/hume pipe for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following medium duty gi pipes/ conduits/hume pipes for routing cables (from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge), including supply and installation of clamps/ fasteners/ supports, accessories like bends/ couplers along with cutting, threading etc., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following sizes and types of cable trays and accessories as detailed in drawings and specification including supply & inst

CTN :39496261

13 Mar, 2025 NA

Tirunelveli - Tamil Nadu

Tender For transporting of 9mtr psc pole , loading & unloading of 9mtr psc pole , exca. of 9mtr psc pole in rocky ground , erection of 9mtr psc pole in rocky ground , transporting of 8mtr psc pole , loading & unloading of 8mtr psc pole , exca & erac of 8mtr psc pole in rocky ground , stringing & sagging of 7/3.15 acsr with lc , stringing & sagging of 7/3.15 acsr without lc , stringing & sagging of 7/2.50 acsr without lc , stringing & sagging of 7/2.50 acsr with lc , fixing of tapping cross arm , fixing of three phase x arm , fixing of single phase x arm , fixing of 3.5" v cross arm , fixing of disc , fixing of ht ti fitting , fixing of ht/lt pin insulators , fixing of lt shackle , fixing of stay set complete in rocky ground , fixing of stay set complete , providing jumpering at cut point , holes and drilling , alternation of clamp , pole concreting , coping of pole , fixing of pole earthing , erection of 25kva dt , erection of 100kva dt , loading & unloading of. dt , transporting of. dt (below 100 kva) , erection of single pole transformer structure , erection of dp structure , dismantling of 8mtr psc pole , dismantling of 9mtr psc pole , dismantling of three phase x arm , dismantling of tapping xarm , dismantling of ht ti fitting , dismantling of disc , dismantling of single phase x arm , dismantling of ht/lt pin , dismantling of stay set in rocky ground, dismantling of v x arm , dismantling of 7/2.50 acsr without lc , dismantling of 7/3.15 acsr with lc , dismantling of dp structure material , transporting of line materials from store to site using private vehicle , tree clearance , erection of centre support

CTN :39334159

10 Mar, 2025 NA

Multi City - Andhra Pradesh

Tender For corrigendum : dr.nttps/supply of general purpose t&p materials - micro meter, outside, 0-50mm , vernier caliper , light in stainless steel body cum reflector , heavy duty drilling machine , portable welding machine , ss tube cutter , ss tube bender , copper tube cutter kit , hacksaw frame , vacuum cleaner,dry type industrial , analog lan tester (cat6)

CTN :39468339

06 Mar, 2025 11.24 Lacs

Malkangiri - Odisha

Tender For supplying all materials, labour, t and p and sinking of 125mm x 100mm dia tube wells through combination (dth-cum-rotary) drilling method using pvc casing pipes with fast drilling rigs at different villages of korukonda block

CTN :39468340

06 Mar, 2025 7.49 Lacs

Malkangiri - Odisha

Tender For supplying all materials, labour, t and p and sinking of 125mm x 100mm dia tube wells through combination (dth-cum-rotary) drilling method using pvc casing pipes with fast drilling rigs at different villages of malkangiri and mathili block i

CTN :39468341

06 Mar, 2025 9.37 Lacs

Malkangiri - Odisha

Tender For supplying all materials, labour, t and p and sinking of 125mm x 100mm dia tube wells through combination (dth-cum-rotary) drilling method using pvc casing pipes with fast drilling rigs at different villages of khairput and korukonda block

CTN :39468342

06 Mar, 2025 24.83 Lacs

Malkangiri - Odisha

Tender For supplying all materials, labour, t and p and sinking of 125mm x 100mm dia tube wells through combination (dth-cum-rotary) drilling method using pvc casing pipes with fast drilling rigs at different villages of chitrakonda block

Drill Machine Hiring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government And Public Sector