Latest drill machine sale Tenders | Government drill machine sale Tenders

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government And Public Sector

CTN :37948499

19 Nov, 2024 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : supply of vibrobit make sensors and accessories - rotor vibration sensor, make - vibrobit, model - dvt10-160- 0,5 , vibrobit make ip37 b-05 slash 2-7 -rotor vibration convertor. , cable for vibrobit make rotor vibration sensor cable length -7m , bearing vibration sensors along with amplifiers, range- 0-15 mm slash s, make- vibrobit, model dpe23mvb, output range-4-20ma, sensor cable length 5.0m , rotor expansion sensor, make- vibrobit, range 0-16 mm, model- dvt 60.20-5 , secondary converter for rotor expansion sensor in hp turbine, range 0-16mm, make vibrobit, model- ip34-b-16-60-5 , rotor expansion sensor in lp turbine, range 0-25mm, make- vibrobit, model- dvt 40.20-7 , secondary converter for rotor expansion sensor for lp turbine, range 0-25mm, make- vibrobit, model- ip42- b-25-25-7 , rotor expansion sensor in lp turbine, range 0- 45mm, make - vibrobit, model- dvt 40.30-7 , vibrobit make dvt82, along with b.50 -casing expansion sensor along with scale and convertor , speed sensor, make - vibrobit, model - dvt30-0.5, range 0-4000 rpm , cable for vibrobit make speed sensor cable length - 5m , eddy current trip striker sensor, make - vibrobit, model - dvt 43.40x7 , convertor, make - vibrobit, model - k21- 0.5-7 for vibrobit make eddy current trip striker , vibrobit make dvt82, along with b.160. hp control valve position transducer along with scale and secondary convertor. , casing expansion sensor, make- vibrobit, model- dvt 82-b-50 , speed indicator, make - vibrobit, model - e n22 , range - 0 - 4000 rpm , power limiter with converter and integrated cable , make - vibrobit, model - no.b.100. scale 120 , axial shift sensor with ss316 of standard probe length - dim-38mm. model - dvt20-40-0.5 , axial shift sensor of probe length dim-50mm makevibrobit.model dvt20-50-0.5 for feed water pump , vibrobit make ip34 b-04-20-5 - secondary convertor for axial shift sensor. , connecting cable of length -7m for axial shift sensor. model - kc10 , 220v dcto24v dc converter module for axial shift sensor-item 20 feed water pump axial shift.model - built in converter - model ip34 b04- 20-5. , sealing device 9.042 make- vibobit. model- m24 , cable 9.057 make- vibrobit. model- kc10-7 , cable 9.157 make- vibrobit. model- kc11-7 , connector 9.048 make vibrobit. model- kp10 , connector 9.049 make- vibrobit. model- kp20 , converter 9.129 make- vibrobit. model- kp23- pp , installation mechanism 9.044 make- vibrobit. model my10 , installation mechanism 9.144 make- vibrobit. model my11 , test rig 421412.047 make- vibrobit. model- cp10 , adjuster equipment 421412.174 make - vibrobit model ph11 , test rig - make - vibrobit, model - cp20 , portable vibration-testing machine make - vibrobit. model - bcb-131

CTN :38151382

29 Nov, 2024 6.90 Lacs

Port Blair - Andaman And Nicobar Islands

Tender For supply of mechanical engineering laboratory equipment - reciprocating pump test rig , centrifugal pump test rig , thermal conductivity apparatus , stefan boltzman apparatus , ic engine single cylinder test rig , ic engine multi cylinder morse test rig , two stage reciprocating air compressor test rig

CTN :38064794

25 Nov, 2024 NA

Kanpur - Uttar Pradesh

Tender For supply of repair of eve test rig for 435f hyd pump

CTN :38077007

21 Nov, 2024 NA

Ananthnag - Jammu And Kashmir

Tender For supply of mechanical engineering and general workshop items - thickness planner machine mini portable type , electric jigsaw , chain saw petrol run , tool trolley , electric spray paint gun , electric chop saw machine , vblock with clamp set , steel feeler gauge , angle plate , surface plate , scriber block height scriber gauge , ppr pipe welding machine , electric pipe threading machine , pipe die set for thread cutting with handle , plasma cutting machine with all accessories , auto darkening welding helmet , hand lever shear cutter , stakes stake holder set , universal woodworkingmachin withallaccessories , thickness planner machineminiportable type , oxyacetylene weldingandcuttin setwithallaccessories , tig welding apparatus , sine plate , autocollimator , pyrometer , mounting accessoriesofsteamboilers , air compressor test rig , hydraulic bench with apparatus accessories , complete refrigerations and ac tool kit , simple jib crane , simply supported beam apparatus , screw jack , worm and worm wheel apparatus , winch crab single purchase , double purchase crab , abrasive cut off machine , quenching tank , air conditioning test rig , greavesand apparatus , equipment for heat transfer , gear tooth vernier , surface plate granite , apparatus to find coefficient of friction , surface grinder , izod charpy impact testing machine , two stroke petrol engine , single cylinder diesel engine , instruction panelbatteryignitionsystem , cooling system of ic engine , morse test , centrifugal pump single stage test rig , model of pelton wheel , model of francis turbine , closed circuit pipe fricton apparatus , samples of all valves used in refr and air conditioning , refrigeration cycle test rig, experimetial set up to find cop , refigeratoin gas charging kit , polygon law of forces apparatus , friction slide apparatus , vapour compression refrigeration cycle test rig bid details/ 2 / 54

CTN :38019962

14 Nov, 2024 NA

Multi City - Multi State

Tender For supply of repair of fuel pump test rig

Central Government / Public Sector

CTN :37958869

18 Nov, 2024 NA

Sambalpur - Odisha

Tender For supply of porta filter (oil transfer and filtration unit lpm:28 with return filter and v10 van pump one hp motor, pressure gauge 0-200 bar and check valve and strainer, hydraulic hoses and other accessories and hydraulic test rig dimensions and location of the mountings.) make: oil air technique or vankos or veljan or its equivalent.

Drill Machine Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector