Latest driller Tenders | Government driller Tenders

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

State Government

CTN :38191591

22 Nov, 2024 13.80 Lacs

Datia - Madhya Pradesh

Tender For drilling of 400x200 mm dia 60 mtr. depth. g.p.tube well by mud rotary drilling machine in different villages at distt. datia

State Government

CTN :38191593

22 Nov, 2024 13.80 Lacs

Datia - Madhya Pradesh

Tender For drilling of 400x200 mm dia 60 mtr. depth. g.p.tube well by mud rotary drilling machine in different villages at distt. datia

Central Government/Public Sector

CTN :38197041

04 Dec, 2024 NA

Panvel - Maharashtra

Tender For supply of unitized mud cleaner (1200 gpm) for offshore drilling rig with installation and commissioning , unitized mud cleaner (1200 gpm) for onshore drilling rig with installation and commissioning , shale shaker (1500 gpm) for onshore drilling rig with installation and commissioning

CTN :38003260

16 Nov, 2024 NA

Delhi - Delhi

Tender For supply of dental consumable items - glass ionomer cement , composite nano hybrid kit , composite nano hybrid syringe , nano flowable composite , local anesthetic cartridge , bonding agent , astringent retraction paste , light cure nano ionomer , core build up rmgic , radiopaque calcium hydroxide liner , vinyl poly siloxane putty consistency , cartridge based light body vps hydrophilic , prophylatic paste , thin colour coded contouring andpolishing disc , composite finishing polishing system , light cure periodontal surgical dressing , in office whitening , bone graft , guided tissue collagen membrane , calcium hydroxide paste , edta , k file 15 ss 21 mm , k file 15 ss 25 mm , k file 20 ss 21 mm , k file 20 ss 25 mm , k file 25 ss 21 mm , k file 25 ss 25 mm , k file 15 to 40 ss 21 mm , k file 15 to 40 ss 25 mm , k file 45 to 80 ss 21 mm , k file 45 to 80 ss 25 mm , k file 6 ss 21 mm , k file 6 ss 25 mm , k file 8 ss 21 mm , k file 8 ss 25 mm , k file 10 ss 21 mm , k file 10 ss 25 mm , h file 15 ss 21 mm , h file 15 ss 25 mm , h file 20 ss 21 mm , h file 20 ss 25 mm , h file 25 ss 21 mm , h file 25 ss 25 mm , h file 15 to 40 ss 25 mm , h file 15 to 40 ss 21 mm , h file 45 to 80 ss 21 mm , h file 45 to 80 ss 25 mm , k file niti 2 percent 25 mm 15 to 40 with compatible gutta percha point and paper point of same make , k file niti 2 percent 21mm 15 to 40 no with compatible gutta percha point and paper point of same make , k file niti 25mm 2 percent 45 to 80 with gutta percha point and paper point of same size and make , k file niti 21mm 2 percent 45 to 80 with gutta percha point and paper point of same size and make , assorted pack 13 16 19 2 percent 21 mm , assorted pack 13 16 19 2 percent 25 mm , assorted pack 21 mm coronal flaring file , rotary files assorted pack 25 mm coronal flaring file , rotary files assorted pack 31 mm coronal flaring file , rotary files assorted pack 21 mm , rotary files assorted pack 25 mm , 15 to 40 no assorted 6 percent gp , 15 to 40 no assorted 4 percent gp , 15 to 40 no assorted 6 percent pp , 15 to 40 no assorted 4 percent pp , chlorhexidin e digluconate solution for root canal disinfection , sodium hypochlorite 500 ml , zoe based root canal sealer with corticosteroid , resin based root canal sealer , endo cold spray for tooth vitality test , g g driller , peaso reamer , calcium hydroxide iodoform paste , upper lower disposable impression trays with sectional trays , modelling wax , alu wax , carbide burs tapered fissure , tapered bur with round tip for endodontic access , mta , biodentine , collagen sponge , protaper gp f1 f2 f3 , etchant 5ml , post and core kit , eugenol impregnated alveolar dressing , topical anesthetic spray , desensitizing solution , matrix system , 3d rubber dam , udms based restorative material , one step bulk placement dental composite , cartridge based bioactive synthetic bone graft , gelatin sponge pack of 10 , intermediate restorative material , double side vented needle 30 gauge pack of 25 , strip crowns , ss crown kit , ss crown refill

Central Government/Public Sector

CTN :37650321

16 Dec, 2024 NA

Dibrugarh - Assam

Tender For expression of interest for aatmanirbhar bharat abhiyyan has been launched. oil india limited (oil) is committed to take forward vision of aatmanirbhar bharat abhiyyan for import substitution of items required by oil india limited (oil). - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools-elevators, tongs, slips etc, potassium formate, solid control equipment mud cleaner/degasser/ centrifuge linear motion shale shaker, sucker rod pump (srp) and its accessories, srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 110d standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool: 6.5/8 inches od junk sub for operation inside 8.1/2 inches, hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od casing, pneumatic spinner, 5.1/2 premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with installation, commissioning and training, wireline mast unit, including training and installations commissioning, oil well explosives: (1) 2-1/8 inch tubing cutter along with detonator, and hardware accessories (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools power charge primary ignitor & secondary ignitor, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m-ss flexible steel hose 3.1/16" x 10m-ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation & commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092) piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge, automatic distillation apparatus, ft-ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted length, geological thin section preparation unit comprising of cutting. vacuum impregnation, grinding and polishing equipment and consumables, polarised microscope, pony drill collar, premium tubing, 37.1/2" rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., hot tapping unit, drilling simulator, wellhead sampling kit, spear (fishing tool), echometer, 4" reverse circulating junk basket fishing tool, 2 and 2 5/8 drill collar severing tool (dcst) explosives, well servicing pump package for workover operation, die collar fishing tool, packer milling & retrievable tool fishing tool, drill pipe spinner, drill collar elevator, torque master

Driller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector