Latest drilling rig machine Tenders | Government drilling rig machine Tenders

State Government

CTN :38198436

04 Dec, 2024 5.02 Lacs

Kangra - Himachal Pradesh

Tender For supply of cp grating 100mm cover and frame , ewc cp spray jet 2inch-6inch , looking mirror 600x450mm bevelled edge , superior quality abs wall shower with pipe , ci bib tab 15mm confirming to is781 , cp soap dish , cp towel rail 600mm , washbasin brackets 14 inch size , pvc cistern tank 10 litre capacity , gatti plastic 1 .5inch and 2.5 inch , cp hex nipple 1 inch to 2 inch , cp extension nipple 0.5 inch to 2 inch , fastern gatti 4 inch , white cement 1 kg packing , pvc seat cover isi marked , m-seal , plumbing thread roll , ms hooks 0.75 inch and 0.5 inch , hexa blade12 inchx1 inchx 23g double sided , pvc cup 32mm , pvc cup 40mm , brass spindle assembly 15mm full turn , brass spindle assembly 15mm quarter turn , ball cock 15mm heavy duty , ball cock 20mm heavy duty , pvc connection pipe wire braided , drill bit 6.5 mm concrete work

Central Government/Public Sector

CTN :38184818

03 Dec, 2024 NA

Raipur - Chhattisgarh

Tender For supply of open tennis court fence under shq bsf raipur - ms square tube , ms angle , ms flat , ms wire mesh , nut bolt , drill bit , welding rod , abrasive blade , drilling screw , gotti set , stone aggregate single size 20 mm , stone aggregate single size 10 mm , portland cement opc-43 grade , synthetic enamel paint , coarse sand , red oxide , painting brush

Central Government / Public Sector

CTN :37881295

20 Nov, 2024 NA

Faridabad - Haryana

Tender For corrigendum : supply of paint spray gun aerograph ecc. press , drilling machine heavy duty capacity 25mm , 31mm drill bit morse taper drill machine , corded hand drill machine of drill capacity of 13 mm , angle grinding machine 100 mm , al self supporting sliding ladder height 32 feet , al wall supporting ladders height 20 feet , ladder aluminium 20 feet , al self supporting ladders height 10 feet , laser distance meter upto 100m , laser distance meter 250 meter , dewatering submersible pump 1 hp

Central Government/Public Sector

CTN :38208865

25 Nov, 2024 NA

Dehradune - Uttarakhand

Tender For supply of drill bit 28 mm as per is 5103 make jk or similar [ warranty period: 30 months after the da te of delivery ]

Central Government/Public Sector

CTN :38208527

11 Dec, 2024 NA

Kanakapura - Karnataka

Tender For supply of high speed steel high cobalt content drill bit 6.0 mm, as per drawing: din 338, other details as per enclosed annexure-mp/spec-01/12/rev-01 dated-22.06.2017. to be pur chased from oem or the authorised dealers of oems, quality plan: n.a. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

State Government

CTN :38192385

18 Nov, 2024 NA

Patiala - Punjab

Tender For rate contract of arthroscopic implant - shaver blades for arthroscopy (assorted sizes and configurations including aggressive shavers), shaver burr for arthroscopy (assorted sizes), arthroscopic cannulas for shoulder surgery with flaps/deployable low-profile wing to help prevent cannula fallout , passport cannula for knee and shoulder arthroscopic surgery (assorted sizes), bio composite fenestrated interference screws with diameter of 5 mm to 12 mm of length 25-35mm, all inside meniscal repair system with pre knotted 2 peek implants mounted on a rigid needle (straight, curved, or reverse curved) should have an inbuilt depth penetration limiter to prevent the posterior capsule and can be deployed in the meniscus at any angle (360 deployment). (required instruments such as cannula, depth probe, rasp, suture cutter must be provided during the case), disposable suture passer for shoulder arthroscopy preloaded curved needle and self-retrieving the suture with shaft length of approx. 165mm and jaw opening to approx. 17.6mm, with for taking bite of tissue up-to depth 18 mm, disposable suture passer for knee arthroscopy surgery, preloaded curved needle and self-retrieving the suture with shaft length of approx. 165mm and jaw opening to approx. 12.5mm, with for taking bite of tissue., titanium endobutton with atleast one accessory sutures for femoral fixation with the adjustable loop, size ranges from 10-105 mm and graft cradle., titanium button with one accessory sutures for tibial fixation with the adjustable loop, size ranges from 10-105 mm and graft cradle for during all inside acl/pcl reconstruction, titanium endobutton with one pulling suture and one flipping suture for femoral fixation with the fixed braided loop, size ranging from 10-40 mm for acl/pcl reconstruction., suture washer size ranging from 15 to 17mm dia, femoral fixation device for use in conjunction with any button device, which covers an area of femoral tunnel from 6 to 10 mm area to provide an effective solution for cortical blowouts during femoral tunnel drilling., fibre wire #2-0, suture and needle assembly (assorted colour), fibre wire #1, suture and needle assembly (assorted colour), fibre wire #2, suture and needle assembly, 38" (assorted colour), suture post (assorted sizes), peek interference fenestrated screws with diameter of 6 mm to 12 mm of length 25-35mm for tibial fixation in acl reconstruction, a non-absorbable sterile synthetic smooth flat suture (width 2mm tape type) composed of ultrahigh molecular weight polyethylene (assorted colour), hydroxyappetite coated, bioabsorbable fenestrated interference screw of length 20- 35mm, & diameter 6mm - 12mm, 1.5-2mm all suture, soft, double loaded anchor made up of high molecular weight polyethylene braided fibre & preloaded with ultrahigh molecular weight polyethylene braided sutures drill bit and drill guide set should be provided with the implant during the case, self-punching knotless anchors biocomposite, fenestrated, size 5mm to 5.5mm, with internal suture locking, self-punching knotless anchors peek, fenestrated, size 5.0 to 5.5mm, with internal suture locking, transparent arthroscopy shoulder cannula (assorted sizes) ., minitape for knotless instability (labram repair) tapers into #2 sutures for ease of use, 4.75mm to 5mm bioabsorbable/biocomposite screw in anchors with open architecture, preloaded at distal end of the anchor with one ultrahigh molecular weight polyethylene braided fiber wire & a fibretape for rotator cuff repair., double loaded metal anchors (ti) 4.5-5.5mm for shoulder with 4 needles assembly with proximal cutting threads., single loaded metal anchors (ti) 2.5-3mm for shoulder arthroscopy with proximal cutting threads., double loaded metal anchors (ti) 4.5- 5.5mm for shoulder arthroscopy with proximal cutting threads., 5mm - 6mm peek anchor with open architecture, preloaded at distal end of t anchor with two ultrahigh molecular weight polyethylene braided fiberwires., all

CTN :38198557

04 Dec, 2024 NA

Jhansi - Uttar Pradesh

Tender For supply of aro tool box 82 pieces , impact screw driver , hand grinder machine , drill bit set , neon timing lamp

CTN :37969364

15 Nov, 2024 NA

Ganganagar - Rajasthan

Tender For bid to ras supply of as per boq - air condition system , two way oil filter wrench , 3 jaw universal oil filter , open spanner set taparia , wall drill bit 8mm

CTN :37815811

15 Nov, 2024 NA

Budgam - Jammu And Kashmir

Tender For bid to ras supply of - r32 coupling sleeve for wagon rock drill sandvik model ds 400r,r32 button bit 51 mm for wagon rock drill sandvik model ds 400 r,shank adapter rd414 for wagon rock drill sandvik model ds 400 r,r32 extension rod 3050 mm for wagon rock drill sandvik model ds 400r,washing powder

Drilling Rig Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government