Latest drilling work Tenders | Government drilling work Tenders

CTN :44156344

03 Mar, 2026 NA

East Khasi Hills - Meghalaya

Tender For supply of standard penetration test for bore hole no 1 , standard penetration test for bore hole no 2 , standard penetration test for bore hole no 3 , standard penetration test for bore hole no 4 , standard penetration test for bore hole no 5 , standard penetration test for bore hole no 6 , standard penetration test for bore hole no 7 , standard penetration test for bore hole no 8 , standard penetration test for bore hole no 9 , standard penetration test for bore hole no 10 , standard penetration test for bore hole no 11 , open pit excavation or trial pit , plate load test , topographical survey of land and earth work

State Government

CTN :44084469

02 Mar, 2026 85.0 Thousand

Jabalpur - Madhya Pradesh

Tender For supply of bentonite powder (clay) for drilling work for gravel pack 40 nos tub well under office of the executive engineer, public health engineering department, mechanical division, jabalpur. for ae phe sub. dn. mandla.(2nd call)

Corporations/Associations/Others

CTN :44064051

03 Mar, 2026 29.00 Lacs

Magadi - Karnataka

Tender For tube well drilling work in a total of 11 locations in ward nos. 1, 20, 21, 10, 14, 6, 16 and 17 of magadi municipality

Corporations/Associations/Others

CTN :44064058

03 Mar, 2026 13.00 Lacs

Magadi - Karnataka

Tender For tube well drilling work is underway at a total of 5 locations in ward nos. 9, 7, 11, 13 and 10 of magadi municipality.

CTN :43840459

20 Feb, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of 15mm dia, brass nuts at both end for geyser , gi pipe 15 mm medium grade 6mtr long , ss sliding door bolts 150mm long, plate type, 16 mm dia , glass shelf assembly made of 5. 5mm thick glass sheet, 450 x 125 mm size with chromium plated railing , urinal waste pipe 40mm dia x 800mm long , gi pipe 20 mm medium grade 6 mtr long , 25mm brass float valve complete with brass rod and pvc ball , gi pipe 20mm dia, medium grade 6 mtr , rubber door seal 1. 2mtr long , gi pipe 15mm dia, medium grade 6 mtr , ptmt waste coupling, 32 mm dia, full thread. , copper sulphate crystal , tarpentine oil , hard rubber shoe pvc suitable for gi charpoy 32 mm bore dia , pvc swr bend suitable for 110 mm pipe , pvc plain waste pipe 800mm long, 40mm dia size. , brass spindle for concealed stop cock 15 mm , pvc flush bend pipe 600mm for high level flushing cistern , varnish clear type , brass half round spindle for bib cock 15 mm , pvc flush bend pipe for low level flushing cistern , aluminium anodised sliding door bolts 250mm long, plate type 16 mm dia , aluminium anodised sliding door bolts 200mm long, plate type 16 mm dia , gi pipe 50mm dia, medium grade 6 mtr , ptmt waste coupling, 40 mm dia, full thread. , fully automatic star delta starter for 25 hp motor, 3 ph, 415 v , ss floor door stopper 140 mm long , aluminium anodised sliding door bolts 300mm long, plate type 16 mm dia , fully automatic star delta starter for 12. 5 hp motor, 3 ph, 415 v , gi pipe 40mm dia, medium grade 6 mtr , mortice lock vertical type 200mm size, 6 lever for aluminium door , gi pipe 25mm dia, medium grade 6 mtr , ht fuse wire 20amp , ht fuse wire 15amp , ht fuse wire 25amp , rubber washer for pvc flushing cistern , aluminium anodised floor door stopper 140 mm long , dol starter for 5 hp motor, 3 ph, 415 v , 75mm pvc socket , 110mm pvc elbow , 75mm pvc elbow , power contactor 630a for three phase , power contactor 400a for three phase , power contactor 320a for three phase , power contactor 250a for three phase , power contactor 200a for three phase , led tri color strip light of length 18 metre , junction panel 400 a with busbar , junction panel 315 a with busbar , junction panel 250 a with busbar , auto dim invertor street light 120watt , lightning arrestor 11 kv , lightning arrestor 33 kv , pin type insulator for lt , post insulator lt , shackle type insulator for lt , split air conditioner of 1. 5 tr of 5 star rating , split air conditioner of 2. 0 tr of 5 star rating , automatic voltage stabilizer,of capacity 4 kva , automatic voltage stabilizer,of capacity 5 kva , copper wiring alongwith earth wire 3 runs x 4. 0 sqmm , single pole and neutral single pole mcb 20 a , supply and fix mcb distribution board, spn, 4 way , mcb spn 40 to 63 amp, 10 ka, c curve , mcb sp 6 to 32 amp, 10 ka, c curve, , water cooler storage capacity 80 ltrs , water cooler storage capacity 120 ltrs , water cooler storage capacity 150 ltrs , refrigerator 180 to 195 litres , regrigerator 330 litres , air curtain of size 4 feet , desert cooler , capacity 5000 cum per hr , supply and install wall mount bracket for ac outdoor unit ss wire mesh cloth 25kg each roll, brass float valve 20mm complete, brass float valve 15mm complete , pvc internal flush kit with float and handle , sofa cushion 22 inch x21 inch x4 inch , pvc connection 600 x 15mm dia, ptmt nuts at both end. , ptmt ball valve (body only), 20 mm dia, isi marked. , ptmt ball valve (body only), 15 mm dia, isi marked. , brass spindle for bib cock 15 mm, ss sliding door bolts 200mm long, plate type, ss 150mm long sliding door bolt hasp & staple type , ss sliding door bolts 250mm long, plate type, brass spindle for pillar cock, pvc connection 450 //bid details2 / 113

State Government

CTN :43983174

06 Mar, 2026 20.00 Lacs

Buldana - Maharashtra

Tender For rotary drilling works at various places in district buldhana

State Government

CTN :43983231

06 Mar, 2026 20.00 Lacs

Buldana - Maharashtra

Tender For dth drilling works at various places in district buldhana

CTN :43926523

24 Feb, 2026 NA

Bathinda - Punjab

Tender For supply of mechanical engineering labs and workshop equipment c c -balancing machine , ac induction motor with vfd for motorizing already existing models in lab , air compressor for tyre inflation , metallurgical microscope , standard prepared readymade samples or specimen with photographs , bench grinding machine , metallurgical cut off machine , spark test apparatus , digital pyrometer , split ac test rig , vapour absorption refrigeration test rig , ice plant trainer , water cooler , tool kit , voltmeter , ampere meter 5 amp , ampere meter 30 amp , pressure gauge , compound gauge , ring spanner set , thermometer with case , swaging tool set , leak detector to detect cfc and hfcs , digital anemometer , sling psychrometer , profile projector , tool maker microscope , auto collimator with stand , angle deckor with set of angle gauges , digital vernier calliper , digital micrometer , height gauge , slip gauges set , surface roughness tester , dial indicator with stand , cylindrical bore gauge , vernier bevel protractor , comparator stand , mechanical comparator , sine bar 125mm , sine bar 250 mm , surface plate , angle plate , magnetic v block , clinometer , gear tooth vernier , screw thread micrometer , metallic try square , electronic weighing machine , digital tachometer , feeler gauge , wire gauge , radius gauge , meteric thread pitch gauge , go-no go thread plug gauge , go-no go snap gauge , go-no go ring gauge , cylinder rollers and spherical balls , motor coil winding machine , voltage stabilizer , earth leakage circuit breaker, single phase , earth leakage circuit breaker, three phase , residual current circuit breaker, single phase , residual current circuit breaker, three phase , digital clip on meter , digital energy meter , analog meggar , digital earth tester , electricity tester , wire stripper , plier , cutting plier 8 inch , heat convector , desert cooler , electric oven , electric kettle , planner , seam welding set , arc welding table , gas welding table , welding screen , gloves , oxygen regulator with spanner , round die handle , tap wrench, 5 by 16th of an inch to 1 inch , hand tap set , angle grinder , grinder , bench grinder 0. 5 hp motor , circle cutting machine , edge folding machine , foot shear machine , hand stake , funnel stake , round stake , taper stake , scriber 8 inches , sheet steel wire gauge , rivet snap 0. 25, 0. 5, 0. 75, 1 inch , rivet set 0. 25, 0. 5, 0. 75, 1 inch , oil fired tilting type furnace , ladle , ladle holder , shovel , riddle , foundry bellow , moulding board , foundary moulding sand , parting off sand //bid details2 / 90

Central Government/Public Sector

CTN :43698963

07 Mar, 2026 2.99 Crore

Poonch - Jammu And Kashmir

Tender For provn of dry ration stores under ge 881 ews - sch a part-i (building work):-this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., construction of block of storage shed complete all as shown on drawings and as specified., total amount of sch a part - ii (site clearance/development work), total amount of sch a part - iii (internal electric supply work), total amount of sch a part - iv (protective work), total amount of sch a part - v (area drainage work), total amount of sch a part -vi (road, path and culvert work), total amount of sch a part -vii (external electric supply work), total amount of sch a part -viii (demolition/dismantling work), sch a part - ix (misc items of work) note : this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., double walled corrugated (dwc) pipe for cable protection with outer dia 50mm and inner dia 38mm including suitable size of coupler for connection of pipe complete all as specified and directed., point wiring for one light/fan point/call bell point controlled by one way switch 5 amp with 1.5 sqmm single core multi standed copper conductor frlsh insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor frlsh insulated, drawn into and including concealed in pvc conduit of not less than 20mm dia and 1.5mm wall thickness (isi marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on same board., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on independent board., earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia gi light grade protection pipe, 20mm dia gi medium grade watering pipe with funnel including charcoal, dust, salt, pcc m-15 type b1 in pit with angle iron (25x25x3)mm frame work with precast rcc 1:2:4 type b-1 cover reinforced with 8mm dia tmt bars @ 150mm c/c both ways and 12mm dia ms fabricated handle, test point etc. in and including light grade gi protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate no. 3 of ssr part-i complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.note:- on testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction., inverter led light fittings batten type, 1x20w led, 230v, complete with all accessories internally per wired including lithium lon battery with charging time 8 to 10 hours and back up time up to 4 hours and connecting up with pvc insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed., led street light/ security light fitting 35 watt, 230 v, ac, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 66 protection, including provision of gi bracket made of 40mm dia, gi pipe, 1.5m long, bend to shape, complete all as specified., mcb, spn, 240 volts, 40 to 63 amps,10ka, breaking capacity, complete all as specified., mcb, spn, 240 volts, 6 to 32 amps,10ka, breaking capacity,

Drilling Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations/Associations/Others

Corporations/Associations/Others

State Government

State Government

Central Government/Public Sector