Latest driving plate Tenders | Government driving plate Tenders

Central Government/Public Sector

CTN :38207879

19 Nov, 2024 NA

Jhansi - Uttar Pradesh

Tender For switch plate assembly complete with polycarbonate cover frame and powder c oated steel plate with 1 no. on-off switch and 1 no. 3-pin socket 6a, 250v ac with 01 no. 1.0 a mp glass fuse of m/s ferraz shawmut copperbussman/ equivalent with the approval from th e office of cee/rcf/kxh (with fuse holders) as per drg.no. edml-064, rev-b, table-1, s.no.-3 (item no. 16 of drawing no. lw74202 alt 'f') or latest.make approved sources only. note:- one sample should be got approved before bulk supply [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38208637

25 Nov, 2024 NA

Mumbai - Maharashtra

Tender For supply of 2kw capacity cooking coil made out imported incoloy double coil with steel ring, operating vo ltage 230- volts ac, confirming to is: 4159 (latest) hot plate dia 7 3/4'' (inches) and external dia up to steel ring 9 1/2'' (inches) along with suitable copper crimping sockets with isi mark, suitable for lhb hot buffet c ar pantry equipment. material make shall be alpha, theeta, airex, dasspass or escort or eichen only. materi al shall be procures from oem or his authorized dealers or proof of purchase from oem or his authorized de alers. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38190236

25 Nov, 2024 NA

Pune - Maharashtra

Tender For supply of stainless steel plate to size 1250x6000x4mm as per rdso spec.no. irs: m44/97 suitable for boxn hl wagon. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38141128

07 Dec, 2024 NA

Dahod - Gujarat

Tender For corrigendum : supply of wear plate for brake beam of casnub bogies to rdso drg. no- wd- 89033-s-1, alt.no. -24, item-8, material- spring steel to is:3885: part-i :1992, reaffirmed-2022, cl-iv, hardness: 380 to 4 20 bhn & other technical requirements conforming to rdso specification no. wd-21- casnub-22nlb- 93 rev 2 of july 2002. read with all amendments. latest amend. no.6 of july-2020. [ warranty perio d: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38208098

20 Nov, 2024 NA

Chennai - Tamil Nadu

Tender For supply of switch plate assembly complete with polycarbonate cover frame and powder coated steel pl ate with 2 nos. on-off switches and 1 no. 3 pin socket 6 a, 250 v ac with 1 no. 2.0 amp. glass fuse of m/s. ferraz shawmut / cooper bussmann / equivalent (with fuse holder) confirming to rcf specification no. edm l 64, rev.b, amendment-4 and drawing no. lw 74202, alt.f, item no.4 (table-10.s.no.2) (cs, 110v, fl mar king shall be provided on the switch). warranty 12 months. [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :38208521

10 Dec, 2024 NA

Jodhpur - Rajasthan

Tender For supply of high tensile hex head bolt with full threads size: 12x50 mm with one nut, double plate was her, one spring washer and one nyloc nut conforming to is:1367(pt-14) sec 1, 2023, gr. a2, pr-class-70 ( stainless steel i.e. ss-304)make-tvs, lps, unbrako or equivalent [ warranty period: 30 months after t he date of delivery ]

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government/Public Sector

CTN :38183649

22 Nov, 2024 NA

Varanasi - Uttar Pradesh

Tender For supply of face plate jaw (forged alloy steel) for vbr machine

Central Government / Public Sector

CTN :38208160

02 Dec, 2024 NA

Sambalpur - Odisha

Tender For manufacture and supply of fabricated anticreep device for 10125 mm curved switches with zu-1- 60thick web tongue rails b.g. (1673 mm) for 60 kg (uic) on psc sleepers as per rdso drg. no. rdso /t-8782 &rdso/t-8783 complete with fittings (including 27 mm dia. hts bolt with nut to drg. no. rdso/t- 8786 & rdso/t-8787 and hardened packing plate to drg. no. rdso/t-8784 & rdso/t-8785) acd material shall be structural steel confirming to the requirement of grade e-350/br of is: 2062-2011 indian standard hot rolled medium and high tensile steel - specification (seventh revision). notes : (i) the 27 mm dia hts bolt and nut shall be confirm to is:3757 & is:6623 and shall be manufactured by rdso approved vendor fo r hts bolts & nuts. the dimension of hts bolts and nuts shall be as per drawing no. rdso /t-8786 & rdso/ t-8787 . these bolt and nuts are shall be arranged and supplied by the suppliers /tenderers . (ii) hardened packing plate shall confirm to is : 6649 and material 45c8 steel according to is:1570 (part 2). the dimensi on of hardened packing plate shall be as per drawing no. rdso/t-8784 & rdso/t-8785. hardened packing plate shall be arranged and supplied by the suppliers /tenderers. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :37313450

16 Nov, 2024 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : supply of osaero manufacturing and supply of 112 parts as a package ref semfg446 r - spring plate(stepway), firewall (sta #1 fwd.), firewall (sta #1a), firewall(sta#1), firewall floor (#1a-fwd.#1), hinge plate fc-rh, spring clip, locking insert, cable, strip, shim(frf-0.5mm), shim (frf-0.8mm), lead washer (mass balance), lead plate (mass balance), shim (t=0.5mm), lead sheet (fwd), lead sheet (aft), lead sheet (fwd), lead sheet (mid), lead sheet (aft), lead washer (adjustable), balancing weight - 1 gram, balancing weight - 2 gram, balancing weight - 3 gram, balancing weight - 4 gram, bracket, bracket, bracket, bracket, plate - secure, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, l - bracket, steel l-angle, gasket - exhaust duct, steel l-angle, bracket, l - bracket, l - bracket, bracket, l - bracket, l - bracket, plate 1, plate 2, gusset, installation of throttle, installation of throttle, cover plate-2, washer, washer, bracket, channel_quad assy_rh, finger lever handle, brush seal retaining channel, brake arm, plate-brake arm, plate 1, stiffner, bracket, stiffner plate 1, stiffner plate 2, channel, plate-cable stop, bracket, brush retaining channel 2, brush retaining channel, lead sheet, latch vertical flap, latch horizontal flap, bracket (over pressure switch), bracket, installation of throttle, cover plate-2, washer, washer, bracket, channel_quad assy_rh, finger lever handle, brush seal retaining channel, brake arm, plate-brake arm, plate 1, stiffner, bracket, stiffner plate 1, stiffner plate 2, channel, plate-cable stop, bracket, brush retaining channel 2, brush retaining channel, lead sheet, latch vertical flap, latch horizontal flap, bracket (over pressure switch), bracket, lh lead sheet-1, lh lead sheet-2, rh lead sheet-1, rh lead sheet-2, shim (frf-1mm), bracket, bracket

Driving Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors