Latest ducting system Tenders | Government ducting system Tenders

CTN :41759086

23 Sep, 2025 NA

Mumbai - Maharashtra

Tender For supply of new feed hopper and vibratory feeder sta , new vibratory feeder base plate , new mill feed inlet connection , feed rotary air-lock valve rav-100 , silencer for blower , additional ducting for blower as per dra

CTN :41757435

25 Sep, 2025 1.90 Crore

Dehradune - Uttarakhand

Tender For supply of biosafety cabinet class ii a2 with thimble ducting , automated hormone analyser clia based , centrifuge fixed head table top 16 tubes. up to 6000 rpm , centrifuge tabletop swing out with 8 tubes. up to 6000 rpm , vdrl rotator shaker , binocular microscopes , elisa reader with washer , refrigerator 400 litres , deep freezer minus 20 deg c , deep freezer minus 80 deg c desirable , vertical autoclave for sterilisation 100l , vertical autoclave for disinfection 100l , vortex mixer , electronic balance up to 3 decimal places , hot air oven medium size , hot plate for culture media preparation , incubator 2 medium sized , manual cell counter , micropipette 0.1 to 2 microliter , micropipette 1 to 10 microliter , micropipette 5 to 50 microliter , micropipette 50 to 200 microliter , micropipette 200 to 1000 microliter , multi channel pipette octapipette 200 to 1000 microliter , potential of hydrogen meter ph meter , bunsen burner , micro centrifuge machine up to 16000 rpm , pcr workstation , blood gas analyser , binocular microscope led with camera desirable

Co-operative

CTN :41735577

12 Sep, 2025 5.00 Lacs

Kheri - Uttar Pradesh

Tender For thermal insulation by providing light raising bonded slap (lrb slap)density 100 kgs/m3 & aluminum sheet 22 swg g.i. wire, 20 swgfixing of g.i screw pan head 8x13mmby grooving all joint with necessary overlap etc job in valve the work of cleaning of surface area foreconomizer/ air heater ducting, i.d.fan ducting & wet scrubber systemof 02 nos. boiler capacity 40 ton.with material rates as per isi normsthickness of lrb slap 50 mm

CTN :41742380

29 Sep, 2025 9.50 Lacs

Jaipur - Rajasthan

Tender For supply of duct air cooler in 20 gauge iron sheet 30 inch , ducting cooler in 20 gauge iron sheet 24 inch , ducting line in 24 gauge iron sheet for air supply , iron grills manual on off system , wall punching charges for ducting line in rooms gallery , water supply connection in coolers , false ceiling in complete gallery with rooms inc laboratory, pharmacy and extension cell rooms incl labour charges

State Government

CTN :41750172

22 Sep, 2025 NA

Kolkata - West Bengal

Tender For supply installation of laboratory wet shaking mineral separation table - shifting and repairing of fumehood by thoroughly opening, checking, and fixing, also, it will include the change of pulley lock and ss rope. the work will include appropriate ducting of the fumehoods during reinstallation., shifting, thoroughly opening, cleaning, fitting, and fixing of the chemical cabinet, along with ducting associated with it during reinstallation., shifting and repairing of a lab bench with a granite top (size 10 ft x 3 ft) and fitting with drawers and cabinets below the lab bench.it must include granite cutting and setting with adjustable nut bolt., water basin repairing, reinstallation, andfitting and fixing with nuts/ bolts, with appropriate clamps, door lockhinge with a bottom portion having a storage rack., installation of the air exhaust motor 440v, along with the pipeline, by opening and re-fixing. it will include blower motor repairing and ball bearing changing., reestablishment of electric connection for fumehoods in the new lab, blower motor cable, and starting relay control board. installation of switch lamps for the fumeoods., air pressure monitor repairing and servicing for the fume hoods.adaptor sensor data cable complete fitting and fixing., complete painting of fume hoods.inner & outer, chemical storage and lab bench, as well as a wash basin.

CTN :41490779

10 Sep, 2025 NA

Indore - Madhya Pradesh

Tender For bid to ras supply of compression cable lugs (q3) , led batten (q2) , taps or valves of nonferrous metals (q3) , european pattern toilet seat vitreous china (q3) , toilet seat - indian style squatting pan (q3) , hydraulically regulated door closers (q3) , waste pipe (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , connection pipe with nuts (v2) (q3) , taflon tape as per is 14635 (q3) , wire nails (q4) , cable trunking and ducting system for electrical installations (wiring duct) (q3) , molded case circuit breakers (mccb) as per is / iec 60947 (q3) , mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , piano type modular domestic fan regulator as per is 11037 (q3) , elecric bells and accessories as per is 2268 (q3) , modular piano type domestic electrical switches as per is 3854 (q3) , piano type modular domestic electrical sockets - is 1293 (q3) , piano type non modular domestic electrical sockets - is 1293 (q3) , piano type non modular electrical switch socket combination as per is 3854 and is 1293 (q3) , fixed capacitors (fixed capacitor for single phase ac electric fan) as per is 1709:1984 (q3)

State Government

CTN :41571066

19 Sep, 2025 NA

Kolkata - West Bengal

Tender For emergent ducting work of air conditioning work at 7th floor ward area at super speciality block building under medical college, kolkata.

Corporations And Associations And Others

CTN :41629768

24 Sep, 2025 NA

Yamuna Nagar - Haryana

Tender For work of flue gas and air ducting and damper in unit 2 dcrtpp hpgcl yamuna nagar

Corporations / Associations / Others

CTN :41677267

22 Sep, 2025 NA

Ahmedabad - Gujarat

Tender For supply and installation of cleanroom facility - wall panel, ceiling panel , r-70 aluminium coving. (it includes 135 degree - 3 mtr 12 nos and r-70-26 rmtr) both coving, wall panel accessories to complete the installation of 48 sq mir panel., ceiling panel accessories to complete the installation of 22 sq mtr panel., air handling unit (classified). pre filter post filter.. cooling coil, heater-blower assy with drain pan, fine filter. (hepa filter 0.3 micron down to 99.997% efficiency shall be placed in terminal filter boxes in ceiling panel), recirculation type 10-15% fresh air. 85 to 90% recirculation, non cfc gas (like r-32/r-134 a/r410) cooled condensing unit with suitable accessories. (5.5 tr), refrigeration accessories., refrigerant copper piping with 19 mm thick nitrile rubber insulation on suction line and non-insulated liquid line, trays for copper piping etc. & all other accessories like expansion valve, hand shut off valve, dryer, sight glass etc., terminal filter boxes gel seal type with damper and ss grill and damper operating mechanism suitable for required qty, of air suitable for 610x610mm size filter 1000 efm capacity., hepa filter of h14 grade gel seal type 610 x610 mm, capacity 1000 cfm, terminal filter boxes gel seal damper and ss grill and damper required qty, of air suitable operatit for m size filter,, ira chan suitable, hepa filter of h14 grade gel seal type 450x450 mm., capacity 500 cfm, return air riser of 2.4 mtr to 2.7 mtr height with 10 micron filter, grill and volume control damper etc. suitable for iso class 8 clean room., return air control fire damper, air curtain 3ft width,, sheet metal ducting in 24g complete with tdf flanges, gaskets, nutbolts, stiffeners, supports with rtv sealant of higher gauge as per site requirement., thermal insulation-nitrile rubber 19 mm thk, thermal insulation-nitrile rubber 13 mm thk, fibre cloth & uv paint., dynamic garment cabinet with hepa filter h14 grade, blower assy, pre filter of 10 micron, uv light, fluroscent light, hanger, sliding/swing doors in aluminium/gl powder coating with glass, castor wheel, leveling bolt etc., electrical panel for ahu, condensing unit, heaters etc. with vfd, energy meter, mccb, contactor, relay, mcb, simer, temperature and humidity controller etc., electrical wiring with all accessories from control panel to air handling unit to condensing unit., display and control panel for hvac system., led light fixtures 600 x600 mm 36 watt, reputable company electrical cabling with all accessories for complete wiring of lab. mention design considering 3 to 4 equipment of single phase (upto 15 a) and 2 equipment of 3 phase (upto 15a)., pvc piping for draining the, dustry's re, from, ede, andling unit., cross over bench is ss304 1200 mm width x 500 mm height x 350 mm depth (approximate size), epoxy flooring 2mm thick, color as per choice., clean room compatible single leaf door with vision glass, door closer, hinges, push plate, drop seal, handle etc., m.s. structural support for ducting lines and compressors, vertical wall panel wherever require this includes fasteners, plates etc. as per required sizes., r-100 epoxy coving, color same as epoxy floor, validation & documentation., air quantities measurements, temperature, humidity, positive pressure, particle count and documentation like do, iq, oq & design, drawing etc.

CTN :41711104

19 Sep, 2025 NA

Barmer - Rajasthan

Tender For supply of kitchen equipment d d - work table with 1 u s 450,600,850 100 , work table with 1 u s 600,750,850 100 , work table with 1 u s 1050,750,850 100 , work table with 1 u s 1125,600,850 100 , work table with 1 u s 1350,700,850 100 , work table with 1 u s 1650,700,850 100 , work table with 1 u s 1650,750,850 100 , u c pick up with 2 u s 1125,600,850 , over head shelf 1125,300,450 300 , heating element 900,150,100 , table with sink wo u s 850,600,850 100 , table with sink wo u s 1700,700,850 100 , dish landing table 1500,600,850 , single sink 600,600,850 100 , three unit sink 1800,600,850 100 , single burner gas for bulk 600,600,600 , two burner gas 1125,600,850 100 , three burner gas 1650,600,850 100 , tandoor 750,750,850 , table top deep fat fryer 8 ltr , roti tawa with puffer 1200,750,850 , hot dosa plate 1125,600,850 100 , table top idli maker 36 pc, , wall mounted pizza oven 900,600,450 , sandwich griller 375,375 , juicer mixer 1,5 ltr, , pulveriser 15 ltr , tilting wet grinder 10 ltr , dough kneader 20 kg , wall mounted salamander 600,450,300 , bainmarie with1 1gn pan 1850,700 300,850 , thali counter 850,700 300,850 , onion potato bin 900,750,850 , aata maida bin 600,600,850 , ss rack 1125,525,1800 , dunnage rack 1200,600,150 , wall shelf 1800,300 , weighing scale 300 kg , bench weighing scale 30 kg , cold drink ref 600,600,1800 , u c pantry ref 1800,700,850 150 , chest fridge 1125,675,850 , 300 ltr , four door ref 1200,750,2050 , two door ref 750,750,2050 , water cooler 80 ltr , tea coffee urn 10 ltr , pop up toaster 6 pc, 2,3 kw , insect light trap 2 tube , exhaust hood 4800,750,500 , exhaust hood 1050,1050,500 , exhaust hood 1950,750,500 , exhaust hood 1650,900,500 , ducting for exhaust and fresh air , fresh air grill , exhaust blower double skin unit 14000cfm , fresh air double skin unit 10000 cfm , design and mep consultancy

Ducting System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

State Government

State Government

Corporations And Associations And Others

Corporations / Associations / Others