Latest dumb bell Tenders | Government dumb bell Tenders

CTN :40511325

07 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of rubberized weight plates (q3) , rubberized weight dumbbells (q3) , dumbbell rack (q3) , barbell rack (vertical barbell holder) (q4) , weight lifting set (v2) (q4)

CTN :40524997

19 Jun, 2025 NA

Goa - Goa

Tender For supply of rubberized weight plates (q3) , rubberized weight dumbbells (q3) , olympic bar (version 2) (q3) , multi adjustable bench (v2) (q3) , squats rack (version 2) (q3) , leg curl machine (version 2) (q3)

Central Government/Public Sector

CTN :40503496

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of ferritic steel sheet 5x1250 x 3000 mm., as per drawing: rdso spec no.c-k201, gr ade x2crni12 (409m) table 1&2. heat treatment condition 2d as per table-5., packing instruc tion: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic st eel) coils. the coil shall be protected in reasonably good condition to withstand nor mal handling hazard during transit with the following provision as the barest minimu m: i) coil should be wrapped with a layer of water proof paper through out whole leng th. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card b oard sheet. v) after this whole coil should be wrapped with biodegradeable plastic sh eet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring f ollowed by another iron ring. vii) outer edge of the coil should be wrapped with gi rin g. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil shoul d be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form fo r thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 100 0-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2 mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheet s/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate s hall be seprated with a layer of water proof paper, after this the whole bundle shoul d be wrapped with double layer of water proof paper and a biodegradeable plastic she et of suitable thickness. a metal protection in edges should also be provided. ii) all bu ndles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40509329

25 Jun, 2025 NA

Multi City - Multi State

Tender For supply of plate type heat exchanger with one set spare gasket assembly for hydraulic po wer pack of electric arc furnace to following specification . 1) capacity : 30.0 kw. 2) design temperature : 100 degree (hot & cold). 3) design pressure : 10 bar (hot & cold). 4) test press ure : 13 bar (hot & cold). 5) input locations : s1/s3 (hot), s2/s4 (cold). 6) weight : empty 138 kg , full 142 kg. 7) plate pack length : 48.0 mm + or - 3%. 8) material of gasket : viton only. 9) no. of plates : 14. 10) plate material & thickness : ss - 316 & 0.5 mm. 11) flow rate of oil : 122 lpm. 12) flow rate of water : 71 lpm. 13) make: tanter to model no. gld013 x 14 or kaarthik heat t ransfer to model no. kpd20d x 14 - viton or exactly equilvalent makes in thermosys or alfa lava. [ warranty period: 12 months after the date of delivery ]

CTN :40229702

30 May, 2025 NA

Jaisalmer - Rajasthan

Tender For bid to ras supply of stationary items - printed file cover with logo , register 12 quire , register 10 quire , register 8 quire , register 6 quire , pencil , eraser , correction pen , dusting cloth , phoolzadu , phynile 1 ltr , detoll liquid handwash with refill , acid 1 ltr , broom with bamboo , lizol floor cleaner , borocil glass , complaint register , complaint slip book , ball pen black , ball pen blue , ball pen red , uniball pen blue , uniball pen red , uniball pen green , pilot pen blue , refill pilot pen blue , paper pin , u clip , stapler big , stapler small , stapler pin small , stapler pin big , dustbin , calculator , tag , fevistic , stamp pad , cutter , cd rw , cd dvd cover , dvd-rw , file binder , coloured flag , high lighter , room freshner , bathroom freshner , harpic 250 ml , pocha cleaning or mop , good quality towel , toilet brush , transparent tape 1 inch , multicolour tape half inch , mosquito machine with refill , colin 500 ml , wiper , black hit spray 700 ml , napthalene ball 1 kg , door mat , photo paper 200 gsm glossy , white file cover printed with logo , transparent cover , talc sheet , binder clip large , gum bottle 750 ml , prv register as per sample , indent for stores as per sample , gate pass as per sample , paper weight , car diary as per sample , kilometer card printed , talley card printed , paper legal size 75 gsm , paper a-4 size 75 gsm , paper a-3 size 80 gsm , hp cartridge 88a , hp laser 36 a , cartridge hp 335 , cartridge hp 12a , cartridge canon npg 28 , cartridge canon npg 59 , cartridge canon 925 , kyocera cartridge tk-1178 , tea cup set with saucer , quarter plates good quality , water bottle 1 litre , water dispenser bottle 20 ltr , aaa battery cell , wall clock for offices , mouse with wire , keyboard with wire , canon pfi -8120 ink set of five

CTN :39995092

30 May, 2025 NA

Ahmednagar - Maharashtra

Tender For bid to ras supply of rubberized weight plates

State Government

CTN :40488949

11 Jun, 2025 NA

Delhi - Delhi

Tender For supply of gym equipment at sector-14, dwarka, new delhi-110078 - leg press & hack squat machine, leg curl & extension hack & front pulley, machine, decline bench, incline bench, adjustable bench, butterfly machine, chest press machine, weight machine, smith machine, hip thrust machine, abductor, biceps curl machine, treadmill, dumbbell, , dumbbell, dumbbell, dumbbell, dumbbell rack, resistance bands, battle rope, anti-burst gym ball, competition kettle, bell, competition kettle, bell, foam rollers, yoga mats, imported olympic, rod, with spring lock, imported stra ight rod, with spring lock, imported curling rod, with spring lock, barbell stand, stepper, bicep curl rod, imported plates, imported plates, imported plates, imported plates, imported plates, imported plates, imported plates, imported plates, imported plates, dumbbell, dumbbell, dumbbell, dumbbell, dumbbell, stretching band, olympic barbell lock, clamps, gym chalk powder, d bar handle

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

CTN :40450272

04 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of rubberized weight plates,rubberized weight plates,rubberized weight plates,rubberized weight plates,rubberized weight dumbbells,rubberized weight dumbbells,rubberized weight dumbbells,dumbbell rack,barbell rack (vertical barbell holder),weight lifting set (v2),weight lifting set (v2)

CTN :40472644

03 Jun, 2025 NA

Gautam Budnagar - Uttar Pradesh

Tender For supply of multi adjustable bench (v2) (q3) , cross trainers (q3) , commercial air bike (q4) , rubberized weight plates (q3) , dumbbell rack (q3) , rubberized weight dumbbells (q3) , barbell rack (vertical barbell holder) (q4)

Dumb Bell Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

State Government

State Government