Latest dumb waiter Tenders | Government dumb waiter Tenders

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

Central Government And Public Sector

CTN :39848792

21 Apr, 2025 NA

Bhilai - Chhattisgarh

Tender For supply of manually plus electro-hydraulic scissor lift table.

CTN :39848930

21 Apr, 2025 NA

Kanchrapara - West Bengal

Tender For supply of procurement of scissor lift table with wheel; capacity: 500 kgs +/- 50 kgs; etc.

CTN :39760318

27 Mar, 2025 7.50 Lacs

Delhi - Delhi

Tender For corrigendum : am&o (2024-25): lifts and dumb waiters in samvidhan sadan, new delhi. (sh: comprehensive maintenance of otis lifts (lift no. 1 & 4) for year 2025-28).subwork/packages:am&o (2024-25): lift and dumb waiters in samvidhan sadan, new delhi. (sh: comprehensive maintenance of otis lifts (lift no. 1 & 4) for year 2025-28).

Central Government/Public Sector

CTN :39818657

15 Apr, 2025 NA

Bhavnagar - Gujarat

Tender For supply of manual hydraulic scissor lift table as per annexure-a [ warranty period: 30 months after th e date of delivery ]

corporations/Associations/Others

CTN :39759612

03 Apr, 2025 6.03 Lacs

Vadodara - Gujarat

Tender For interior / furniture work at dcf, social forestry office, anand - wooden flooring supply & laying of 8 mm to 8.33mm thick laminated wooden flooring, classification of use 31/23 with a surface abrasion resistance of class ac4. 0.2 mm thick wear layer on top of a high density fiber substrate. plank size 1215 mm x195 to 197mm having locking arrangment with an under laying made of natural colour foam, with accessories like end profile, transition profile, reducer, stair nosing, the item including suplying and fixing of skirting profile & door profile to the flooring. etc, complete as per manufacturers specification, detailed technical specifications, drawings and as per the sr.plant/plant engineer, dcf cabin door -glass with full glass door on patch fitting : providing and fixing glass door with patch fitting door as shown in the drg. door shall consist of make 12mm thk. toughened clear float glass / or frosted glass. rate shall include necessary designer film, approved locking systems, ss handle pair, floor springs (heavy duty or equivalent), gaskets & miscellaneous hardware items. including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge and consultant. drawings and as per the sr.plant/plant engineer, pvc flooring providing & fixing 1.5 mm thk pvc vinyl planks flooring (204mm x 1239mm) looks best when laid on a beautifully smooth sub-floor, which is easily achieved with the right preparation work total thickness 2.5mm, wear layer 0.7mm,total weight 2.6kg/m sq.flooring prepared european classification 34/42(suitable for very heavy commercial and light industrial use).instaulation & design giving by architect.european classification 34/42(suitable for very heavy commercial and light industrial use), account branch a - partation half wooden partition providing and fixing low height partition with installation as per drawing and 50mmx37mm teakwood framing the skeleton (plywood+glass frame structure) with 18mm x 18mm thick (plywood, conforming is 303 bwr grade) vertical and horizontal plywood (patti) both side cover & top of low height partition 12 mm thk. teak wood arched / border patta with 6mm groove as per design. fixing properly without any air gap and finishing with selected 1mm laminate, before installation, make hole/face plate for conduit pipes of electrical / networking cables with openable stud from partition including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., account branch b - new full height storage stroage rack full height storage providing and fixing full height storage up to lintel level, 50mm x 37mm teakwood framing with thick (plywood, conforming is 303 bwr grade) top and shutter 18mm made from post forming in approved shade with vertical and horizontal surface 18mm plywood with inside 0.8mm and outside 1mm laminate finish. all teakwood bidding should be finished by melamine polish with support of s.s. legs, lock, handle, etc. complete as per the architect dwgs, including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., acf cabin a - table & side unit top modification repairing & fixing main table replacement of table top by 6 mm new coariean (dupont or samsung) sheet with proper edge bending and restrengthening of entire table, replacement of drawer channels, locks,handels, keyboard trays etc.including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., curtains a - zibra zibra blind/wooden blind providing and fixing zibra blind curtain of aerolux,vista,neon,mac make or equivalant fixed on window level on wooden batten and curtain lift with cotton thin rope, design and colour as per instruction by engineer in charge with necessary hardware fitting, material and labour etc complete.approoved by engineer incharge and consultant., curtains b - roller a curtain rollar blind provi

Central Government/Public Sector

CTN :39787569

01 Apr, 2025 NA

Hubli - Karnataka

Tender For supply, commissioning and testing of hydraulic high lift truck as per specification, capacity : 1000 kgs, table size: 1200 x 610 x 75mm , lift height : 1700 mm lower height: 500mm. makes: gm or sim ilar. [ warranty period: 30 months after the date of delivery ]

CTN :39788996

31 Mar, 2025 NA

Kharagpur - West Bengal

Tender For supply of scissor lift table, capacity 350kg of nilkamal model nkslt350yel (or) its equivalent model ( detailed specification is enclosed in annexure-ii) [ warranty period: 30 months after the date of delivery ]

State Government

CTN :39739763

25 Mar, 2025 54.48 Lacs

Varanasi - Uttar Pradesh

Tender For comprehensive annual maintenance contract (for 3 years) of otis make lifts/dumb waiter installed in sthapna sthal complex (trauma centre and super speciality hospital bone marrow transplantation and stem cell research centre and sushruta hostel) ims

State Government

CTN :39622552

27 Mar, 2025 NA

Haridwar - Uttarakhand

Tender For corrigendum : supply of model of centrifugal clutch assembly , cut section working model of diaphragm clutch assembly , demonstration board of electronic ignition system, ignition coil , demonstration board of mpfi system , disk brake in working condition with caliper assembly with all parts , drum brake assembly in working condition , full floating axle and semi-floating axle assembly , functional/experiment model of different type of sensors , steering assembly 1. rack & pinion 2. worm & roller 3. recirculating ball 4. power steering 5. electr , synchronous gear box with stand for dismantling and assembly , tandem master cylinder with booster working model , tubed tyre of car, trucks & motorcycle , tubeless tyre of cars & trucks , tyre& split rim wheel assembly , working model of power windows , working model of torque converter model of lmv , arbor press hand operated 2 ton capacity , diesel engine crdi - 4 strokefor dismantling and assembling with swiveling stand. , diesel engine ( running condition) stationary type single cylinder , hydraulic jack hi-lift type , multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer , spring tension tester manually operated with analogue , working condition of diesel engine crdi - 4 stroke engine, assembly with fault simulation board , diesel engine six cylinder in running condition , air bag simulator , air conditioning service unit (car) , four stroke petrol engine with cng setup- working condition , heavy commercial vehicle , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , petrol engine(2-stroke) motor cycle/scooter along with special tools , transfer case with stand for dismantling and assembly , tube/ tyre vulcanizing machine , two post car lift capacity 4000 kg , tyre changer machine , working condition of petrol mpfi engine assembly with fault simulation board , logic probe , test light , angle plate adjustable 250x150x175 , angle plate size 200x100x200mm , anti theft device , battery terminal cleaner tool , car stereo , circlip pliers expanding and contracting type 15cm and 20cm each , distributor -duel advance type, reluctance type , drill point angle gauge , electrical horn ( different types) , glow plug tester , high rate discharge tester (cell tester) , holders, lamp teakwood boards, plug sockets, solders, flux wires and cables batteries round consuma , magneto spanner set with 8 spanners , marking out table 90x60x90 cm. , portable headlight aiming kit , soldering copper hatchet type 500gms , spanner clyburn 15 cm , spark lighter , spark plug spanner 14mm x 18mm x size , straight edge gauge 2 ft. , straight edge gauge 4 ft. , taps and dies complete sets (5 types) , telescope gauge , air conditioned mpfi vehicle with auto transmission and accessories , air conditioning trainer kit , alternator assembly used for lmv , demonstration board ignition system, ignition coil , demonstration board of crdi system working model , discrete component trainer / basic electronics trainer , electronic engine control module , memory keeper / battery backups , starter motor axial type, pre- engagement type & co-axial type , trolley type portable air compressor single cylinder with 45 liters capacity air , ultrasonic injection cleaning equipment , wiper motor assembly , battery charger capable to charge batteries from 5ah 150ah , fuel injection pump ve pump / distributor fuel rotary pump (dpc) pumps / along with special tools an , grease gun heavy duty trolley type 10 kg capacity , automotive oil pump for dismantling and assembling , spark plug spanner 14mm x 18mm x size long bit for alto/800 , starter motor axial type, bid details/ 2 / 63 pre-engagement type & co-axial type , turbocharger cut sectional view latest wgt type to show turbine, impeller and compressor wheels. , tyre pressure gauge with holding nipple , cut section working model of single plate clutch assembly , trolley type por

Dumb Waiter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government