Latest dumper sale Tenders | Government dumper sale Tenders

CTN :41814368

22 Sep, 2025 NA

Multi City - Multi State

Tender For supply of material and labour for all the ct wheel servicing, cleaning, checking and greasing of 0.5ton electric hoist crane 5mtrs , material and labour for all plumber block and bearing block checking and greasing of 0.5ton electric hoist crane 5mtrs , material and labour for lifting hook check and servicing and hoist rope check and servicing of 0.5ton electric hoist crane 5mtrs , material and labour for all gear boxes ct and hoist servicing and overhauling and gear oil change of 0.5ton electric hoist crane 5mtrs , material and labour for hoist rope drum servcing and overhauling of 0.5ton electric hoist crane 5mtrs , material and labour for all nut and bolt check and tightened and damage nut and bolt change of 0.5ton electric hoist crane 5mtrs , material and labour for all the electric crane wiring connection point checking and cleaning and damage wire change of 0.5ton electric hoist crane 5mtrs , material and labour for all electric panel ct and hoist check and servicing and damge components change of 0.5ton electric hoist crane 5mtrs , material and labour for push button and push button cable check and servicing of 0.5ton electric hoist crane 5mtrs , material and labour for all brakes and brake drum ct and hoist check and servicing of 0.5ton electric hoist crane 5mtrs , material and labour for all limit switch check and servicing and damage limit switch change of 0.5ton electric hoist crane 5mtrs , material and labour for only 1 no electric hoist diamantling after thatservicing and erection and commissioning of 0.5ton electric hoist crane 5mtrs ) /bid number : gem/2025/b/6627194 * /dated: 12-09-2025 & & / bid document 1 / 14

CTN :41814728

22 Sep, 2025 NA

Multi City - Multi State

Tender For supply of voltmeter , air filter , cabin lifting hose , fip solenoid , combination switch , reverse gear shaft , rep kit , wiper motor , carbon brush set , vane pump assy

CTN :41800522

30 Oct, 2025 NA

Delhi - Delhi

Tender For procurement of spares for mirage aircraft - cover,electrical connector, module, cobtorator buchon, interface source and amplifer, valve,safety,assy, cable ass special purpose electrical, cable assembly,special purpose,elec, piston,return,brake, valve,safety relief, iff701 cable, stud assembly,turnlock fastener, firing controller unit, box equipped, regulator air pressure, circuit card assy, wrench torque, power supply module, combined pt4 - tt4 (alep) sensor, shaft flexible drive fan flow, accessory gear box drive wrench, switch,push, pl-18 cca, electrical safety tester, plier holder lock (clip plier), universal pylon test adaptors, phasemeter, selector switch, gauge,differential pressure, gauge presure dial, vibration sensor, door, access, circuit card assembly, elv dc power supply module, flow meter turbine, cable electrical, cross beam, circuit card assy, tooling,handling,a/c accessory transfer gearbox, flap, equipped., hose assembly,nonmetallic, iff701ti test set, circuit card assembly, thermometer, pressure indicator manometer, table harmonization tool, mounting tray tool totem, structure, ast board, cfms adaptation tool, caliper, micrometer inside, electric power system test set, pressure regulator, pod lifting adapter, pump, beam, equipped, burner ring,core engine,610-mm dia, door,air intake, valve,check, interface card (bet), switch, circuit card assy, plug assy, air data test set, power supply module, cw power sensor, pressure generator, tube assembly,metal, switch , radio frequency transmission line, wrench, manual recocking device, wing pin machincal extractor, tsa 2535 cable, visualisation box, three phase controller for dc motor, flowmeter, flow meter, voltmeter,digital, power supply, cca, connector, heat exchanger,air to air,aircraft, dual pressure indicator, butterfly valve, cable assembly,special purpose,electrical, valve,closing control

CTN :41755731

19 Sep, 2025 3.00 Lacs

Ambala - Haryana

Tender For supply of air filter , oil filter , fuel filter , mud filter cotton type , steering filter , hydraulic filter , innersia break , solonide switch , universal joint , stopper cable , hrs meter cable , head light with cable , baby filter , water temp gauge , oil temp gauge , amp mtr , air cleaner filter , txn filter , fan belt , front light , water pump , axletor cable , fuel filter with feed pump , fuel filter normal , hyd filter , fuel tank filter , fuel filter cotton type , working light with bulb , indicator back side with bulb , tie rod , front main light , bucket lock nut bolt , bush , grease nipple , accelerator cable , lifting pump , cabin mounting pad , jcb stud , ana bond , m seal , hammering paper , wire brush , third tape , adaper , gear key , wheel brace 27 30 , socket set small , cutting plier , screw driver small , spray gun , stud , d shackle , vall die , pressure gauge , air vall , air line , fuel filter , oil filter , head light , indicator with bulb , by pass filter , head light with bulb

CTN :41315640

13 Sep, 2025 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of release bearing - clutch plare assy , release bearing , exhaust brake system removing and full service and fitting , ramp assy removing he vehcile and taken to machine shop, stripping, checking, cleaning all damaged seals, springs o ring change and ramp assy and testing and fitting the veh hoos operated , transfer mounting bracket , clutch plate assy , pressure plate assy , the above mentioned old parts removing and afterr servicing fitting the vehcile, vehcile tesing mechanical charge , 4x4 assy checking and fully removing full electric connection checking and mechanical fault removing and testing 4x4 , igniition switch , windscreen , relay 12 and 24v , full electrical checking, damaged burning loom change and electrical system service, all light, wiper all testing , labour for mechanical charge , door lock rh and lh , door mechanism rh and lh , wind screen , the above parts removing and new fitting inccluding windscreen removing and fitting , brake shoe lining with rivet , brake drum skimming , brake booster , auxiliary gear box mounting bracket , aixiliary gear box mounting bolt male and female , rotary switch , all wheel drum and brake shoe assy removing and old parts removing and all parts after servicing fitting the vehicle and brake testing mechanical charges , full electrical checking, all lighting system service damaged burning loom replaced and tested , ramp assy removing the vehcile abd taken to machine shop, stripping, checking, cleaning all damaged seals, springs o rings change and ramp assy and testing and fitting the vehcile hood operated , hood lifting pump removing and taken to machine shop stripping and checking parts seals and o rings damaged shaft damaged filling metal and finishing and pump assy and fitting vehvile hood , transfer mounting bracket auxiliary gear box , auxiliary gear box mounting male and nut and bolt , all electrical checking, service and burned and damaged looms change all plighting system testing , the above all parts removing the vehcile and after service fitting the vehcile testing mechanical charges , ignition switch , mounting bracket for transfer case , male and female nut and bolt for transfer case , clutch booster , above parts removing and new parts fitting mechanical charge , full electrical system checking and rectified of burning and damaged loom and sockets and relays

CTN :41787025

22 Sep, 2025 NA

Ajmer - Rajasthan

Tender For supply of air tank d d-- air tank , transfer case input shaft assy , nylon tube assy , assy of gear box top , bolt , oil seal set 14 pcs , cabin lifting seal , snap ring , valve seal gasket , hose 3 mtr , spring with washer clip , centering kit of master cyl oil seal

corporations/Associations/Others

CTN :41615040

11 Sep, 2025 NA

Tuticorin - Tamil Nadu

Tender For echp-i- leading, lifting, shifting, erection, testing and commissioning of 220 volts, 330a and 50a dc charger panels diverted from decommissioned power stations etps for main and standby 220v dc control supply source for ss-iii ht switch gear

corporations/Associations/Others

CTN :41723475

19 Sep, 2025 NA

Tuticorin - Tamil Nadu

Tender For ichp- dismantling, lifting and strengthening the base support frame of coal handling switch gear room-vi

State Government

CTN :41365007

15 Sep, 2025 NA

Phaltan - Maharashtra

Tender For corrigendum : supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can te

Central Government/Public Sector

CTN :41596971

23 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & n

Dumper Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government

Central Government/Public Sector